The Super Quick Disconnect, or SQD attachment, for our RBS9 suppressor has many features that have yet to be seen in any previous suppressor produced by B&T. The RBS9 SQD is an ingenious fusion of the reduced backpressure system (RBS) technology for which B&T is known for, and a totally new one-hand, 3-lug mounting system. The system is both smooth and fast to use. The new SQD mounting system is perhaps the fastest 3-Lug attachment system of its type. The new RBS SQD suppressor will fit all 9mm weapons featuring a 3-Lug barrel interface. This includes but is not limited to B&T’s APC9, SPC9, GHM9, as well as HK’s MP5, MP5K and variants with in-spec tri-lug barrels.The suppressor mounts onto the barrel of the submachine gun by simply pressing it over the barrel. The spring-loaded retaining collar will snap down onto the 3-Lug attachment, automatically locking the suppressor into place. The suppressor will remain securely in place, until the operator wishes to remove it. By simply depressing the tab, the suppressor is free to be removed from the barrel and stowed or reinstalled.The all-new SQD-M offers modularity and customization not seen in another submachine gun suppressor to date. The SQD-M comes in one size yet offers a modular RBS-compatible section that can be added or removed based upon end user mission requirements, allowing the suppressor to remain in a full-length configuration, or in a compact configuration, should the user choose compactness over maximum sound suppression. Further, two endcaps are included with the SQD-M, one vented and the other non-vented. These endcaps allow the user the option of turning the RBS off in favor of a sealed system. If the ultimate in sound suppression is desired, the full-length suppressor with the non-vented endcap will provide this. Otherwise, the end-user can choose for themself the size and function requirements to best fit their mission.Uses B&T’s SQD, or Super Quick Disconnect Tri-Lug Attachment SystemModular design allows for compact and full size lengthsRBS, or Reduced Backpressure System technology in all componentsRBS can be turned on or off by way of included vented and non-vented endcapsA purpose-built submachine gun suppressor offering four different configurationsTechnical Specifications:Length: 6.75"(Stage 1) / 8.80"(Stage 2)Diameter: 2.12"Weight: 22 ozMaterial: AluminumFinish: Black Type III Hard Coat Anodized

B&T APC9 LIMITED 9MM SBR SNIPER GRAY UPPER, MBT STOCK, METAL LOWER Manufacturer B&TModel APC9Caliber 9mmAction Semi AutoBarrel Length 6.7"Capacity 1-30RDBarrel Type 1/2X28Finish BLK/SNIPER GRYFirearm Type SBRSafety AMBI

The SCI-SIX is a centerfire rifle silencer intended for use on semiautomatic and automatic 5.56x45mm host weapons, with no barrel length restrictions.  The silencer mounts to the host firearm with a flash hider mount that left hand threads to the silencer body. It has a 1.64 inch primary diameter and is 6.5 inches long with the mount installed. The main silencer body is constructed from 718 Inconel using additive manufacturing (DMLS 3D printing). The silencer weighs 17 ounces and with the included flash hider mount, the total system weight is 19.6ounces.  The included mount adds 1.125 inches.

Dead Air Mask 22 HD – Rimfire Suppression RefinedThe Dead Air Mask 22 HD stands tall as one of the most trusted rimfire suppressors on the market. Built with a titanium tube and stainless steel baffles, it offers long-term durability in a compact and easy-to-maintain design. Whether you're running .22LR, 17HMR, or even 5.7×28, this can delivers consistent sound suppression across pistols, rifles, and more.At just 5.1 inches in length and weighing 6.6 ounces, the Mask HD provides excellent balance and maneuverability without sacrificing performance. It's full-auto rated and drops first-round pop, making it ideal for everything from plinking to serious rimfire training. No barrel restrictions means no guesswork, and cleaning is simple with the included end cap tool.Thousands of shooters swear by the Mask, and with a near-perfect customer rating.KEY ATTRIBUTES OF THE  DEAD AIR MASK 22 HD SUPPRESSORAwesome Performance: Known for its exceptional performance in suppressing sound.Durable Construction: Made with a titanium tube and stainless steel baffles, ensuring robustness and longevity.Versatility in Caliber Compatibility: Rated for a variety of rounds including .22LR, 22MAG, 17HMR, 17WSM, and up to 5.7×28. Suitable for use with no barrel restrictions on pistols, rifles, and more.Compact Design: Measures only 5.1 inches in length, making it more compact than many other suppressors in its category.Optimal Sound Suppression: Specifically designed for superior sound reduction capabilities.Full Auto Rating: Capable of handling full auto firing, adding to its functional versatility.Elimination of First-Round Pop: Designed to eliminate the common first-round pop issue in suppressors.High Customer Satisfaction: Comes with a strong endorsement from users, evidenced by a near 5-star rating based on over 500 reviews.User Serviceability: Includes an end cap removal tool for easy maintenance and servicing.TECHNICAL SPECIFICATIONSWeight: 6.6 ozLength: 5.1”Diameter: 1.07”Materials: 17-4 STAINLESS STEEL BAFFLES, TITANIUM 3AL-2.5V GRADE 9 TUBEFinish: NITRIDE AND CERAKOTE™Attachment: Direct ThreadWHAT’S IN THE BOXDead Air Mask 22 HDUser ManualEnd Cap Removal Tool

Dead Air Mask 22 HD – Rimfire Suppression RefinedThe Dead Air Mask 22 HD stands tall as one of the most trusted rimfire suppressors on the market. Built with a titanium tube and stainless steel baffles, it offers long-term durability in a compact and easy-to-maintain design. Whether you're running .22LR, 17HMR, or even 5.7×28, this can delivers consistent sound suppression across pistols, rifles, and more.At just 5.1 inches in length and weighing 6.6 ounces, the Mask HD provides excellent balance and maneuverability without sacrificing performance. It's full-auto rated and drops first-round pop, making it ideal for everything from plinking to serious rimfire training. No barrel restrictions means no guesswork, and cleaning is simple with the included end cap tool.Thousands of shooters swear by the Mask, and with a near-perfect customer rating.KEY ATTRIBUTES OF THE  DEAD AIR MASK 22 HD SUPPRESSORAwesome Performance: Known for its exceptional performance in suppressing sound.Durable Construction: Made with a titanium tube and stainless steel baffles, ensuring robustness and longevity.Versatility in Caliber Compatibility: Rated for a variety of rounds including .22LR, 22MAG, 17HMR, 17WSM, and up to 5.7×28. Suitable for use with no barrel restrictions on pistols, rifles, and more.Compact Design: Measures only 5.1 inches in length, making it more compact than many other suppressors in its category.Optimal Sound Suppression: Specifically designed for superior sound reduction capabilities.Full Auto Rating: Capable of handling full auto firing, adding to its functional versatility.Elimination of First-Round Pop: Designed to eliminate the common first-round pop issue in suppressors.High Customer Satisfaction: Comes with a strong endorsement from users, evidenced by a near 5-star rating based on over 500 reviews.User Serviceability: Includes an end cap removal tool for easy maintenance and servicing.TECHNICAL SPECIFICATIONSWeight: 6.6 ozLength: 5.1”Diameter: 1.07”Materials: 17-4 STAINLESS STEEL BAFFLES, TITANIUM 3AL-2.5V GRADE 9 TUBEFinish: NITRIDE AND CERAKOTE™Attachment: Direct ThreadWHAT’S IN THE BOXDead Air Mask 22 HDUser ManualEnd Cap Removal Tool 

Dead Air Primal – Made for Everything From 9mm to .458 SOCOMThe Dead Air Primal thrives on multi-caliber performance, matching the pressure loads of everything from 9mm pistols to hefty .458 SOCOM rifles. Measuring 7.9 inches and weighing 16.5 ounces, this primal suppressor uses 17-4 stainless steel and a nitride thread insert to handle punishing schedules without flinching. Whether you’re running direct thread or sliding onto Dead Air KeyMo for quick swaps, the Primal lines up with a host of mounts: Xeno, Wolfman, Ghost—you name it.Looking for big-bore hush? The Primal hits that sweet spot, covering up to 338 Lapua and even stepping down to standard rifle or pistol cartridges. If you crave all-in-one capability, the Primal’s got you. Blast away confidently on range day or run hunts with heavier rounds—this multi-cal can handle it all.KEY FEATURES OF THE DEAD AIR PRIMALMulti-Caliber Coverage: Tames loads up to .338 Lapua, including 5.56, .30 cal, 9mm, and .45 big-bore expansions.Mounting Flexibility: Supports direct thread, KeyMo, Xeno, Wolfman, Ghost, and other Dead Air attachments.Full-Auto Rated: No sweat if you push the tempo with demanding firing schedules.17-4 Stainless Construction: Built to handle the extremes without losing alignment or quieting power.No Barrel Restrictions: Feels at home on AR pistols, big-bore rifles, or subguns.TECHNICAL SPECIFICATIONSLength: 7.9 inchesWeight: 16.5 ouncesDiameter: 1.618 inchesBuild Material: 17-4 Stainless SteelFinish: High-temp Cerakote plus a nitride thread insertFull Auto Rated: YesBarrel Restrictions: NoneWHAT’S IN THE BOXDead Air Primal SuppressorUser manual

The Dead Air Sandman-S suppressor, an excellent choice for 7.62 silencer aficionados. The Sandman-S isn't just any silencer; it's the crown jewel of the Dead Air Sandman family, famed for its sleek, compact design. Measuring a neat 6.8 inches in length and only 17.7 ounces, the Sandman-S offers a nimble alternative to its big brother, the Sandman-L, which stretches to 8.9 inches and packs on 21.8 ounces, or its other predecessor, the Sandman K, known for its robust design and compact form.Brought to you by the experts at Dead Air Silencers, the Sandman-S is built to take on the toughest challenges without breaking a sweat. It's all about top-notch performance and survival of the fittest with this one. Thanks to its Cobalt6 baffles snuggled in a stainless steel body, the Sandman-S is a fortress of durability and efficiency in the .30 and 5.56 caliber suppressor realm. Sporting a lineup of five Cobalt6 baffles welded with precision, this suppressor isn't just built to last; it's designed to never quit, no matter how hard you run it.FEATURES & BENEFITSThis Dead Air Suppressor is known for its robust strength and even better performance. It is designed with the best-in-class quick-detach QD system, KeyMo. You can quickly install or uninstall this suppressor with the KeyMo mounting system. When you attach the Sandman S to your firearm, you'll notice the minimal point of impact shift, your shots will be ultra-precise.Is the Sandman-S full auto-rated? Absolutely, the Dead Air Sandman S is full auto-rated and utilized by military and law enforcement throughout the United States military.You’ll reduce felt recoil at your shoulder with the Sandman-S. This Dead Air 308 suppressor is rated up to .300 RUM giving you the versatility to shoot popular calibers like 5.56, 7.62, 300BLK, and 6.5 Creedmoor, without barrel length restrictions. When you choose a Dead Air Silencer, you’re getting a suppressor that has been applauded by Silencer Shop customers with over 200 five-star reviews.KEY ATTRIBUTES OF THE DEAD AIR SANDMAN-SCompact Power: At just 6.8 inches long and 17.7 ounces, it's the perfect balance of size and weight for easy handling.Durability Defined: Built with five welded Stellite baffles and a stainless steel housing, designed to outlast the competition.Quick and Easy: Features the KeyMo quick-detach system for a hassle-free, secure fit every time. Quick to attach, quick to remove.Precision Performance: Engineered for minimal point of impact shift to keep your shots accurate. Precision isn't just a feature; it's the standard.Battle Tested: Full auto-rated and trusted by military and law enforcement, this suppressor is made for intense action.All-Around Versatility: Rated for calibers up to .300 RUM, making it a versatile choice for various firearms including AR15, AK, and bolt action rifles.Highly Recommended: With over 200 five-star reviews, its reputation speaks for itself. A top choice among enthusiasts.TECHNICAL SPECIFICATIONSWeight: 17.7 ozLength: 6.8”Diameter: 1.5”Materials: Cobalt 6 Baffles and 17-4 PH Stainless Steel Welded Core, Stainless Steel TubeFinish: Black or FDE Cerakote® body, Nitride attachmentsAttachment: KeyMount - KeyMoWHAT’S IN THE BOXDead Air Sandman-S5/8x24 muzzle brakeUser ManualShim kit

The Dead Air Wolfman is a step forward in suppressor technology. This 9mm modular suppressor is compatible across multiple calibers, including 9mm, 5.56mm, 300BLK, and 7.62x39mm. This makes is a versatile suppressor perfect for pistols, sub-guns, and rifles.Its modular design allows for optimal performance in both full-length and short configurations, with the added capability of dropping suppression levels even further with the rubber wipe in the front cap.Constructed from fully welded 17-4 PH stainless steel, the Wolfman combines ultimate strength with minimal weight, setting a new standard for durability and efficiency. It excels in muzzle suppression while enhancing at-ear comfort for the shooter, thanks to a large internal volume and an expansive blast chamber.FEATURES & BENEFITSThe Dead Air Wolfman is not just a suppressor; it's an integral tool for any shooter looking to enhance their experience. With its modular design, the Wolfman delivers ultimate suppression and flexibility. The inclusion of a wipe-compatible front cap, interchangeable with all R-Series front caps, allows for easy customization and maintenance. It ships with a 1/2-28 direct thread mount, making it ready for a variety of mounting options, including KeyMicro, 3-Lug, and P-Series mounts. Designed to excel with 9mm subguns, it also serves as an exceptional suppressor for 5.56 carbines due to its durable build.KEY ATTRIBUTES OF THE DEAD AIR WOLFMANModular Design: Offers unmatched flexibility between full-length and short configurations.Wipe Compatible Front Cap: Allows for further suppression levels with user-replaceable wipes.Interchangeable Front Caps: Ensures compatibility with all R-Series accessories.Versatile Mounting Options: Includes a 1/2-28 direct thread mount and compatibility with various P-Series mounts.Ultimate Durability: Constructed from fully welded 17-4 stainless steel for maximum strength and longevity.Lightweight: Engineered for balance and minimal weight without sacrificing durability.TECHNICAL SPECIFICATIONSLength: Long Configuration - 7.5 inches, Short Configuration - 5.13 inchesWeight: Long Configuration - 14.4 ounces, Short Configuration - 9.8 ouncesDiameter: 1.618 inchesBuild Materials: Fully welded 17-4 stainless steelFinish: Cerakote™Full Auto Rated: YesNo Barrel Restrictions: NoWHAT’S IN THE BOXDead Air Wolfman Suppressor1/2×28 Direct Thread MountWipe Front CapFront Cap ToolOperator’s Manual

Dead Air Silencers and Ruger® Firearms are two of the most respected names in the shooting sports industry. These great brands came together to offer an entirely new and exciting product line: RXD Suppressors. Dead Air developed this line of performance-driven suppressors and accessories to complement Ruger’s innovative firearms designs. RXD products are not reskins - they represent a new standard for suppressor design, performance, and maintainability.The RXD30Ti combines the two-industry leading patented baffle technologies, Triskelion™ and Nomad™; delivering an ultralight suppressor that has integrated porting to drastically reduce felt recoil. The RXD30Ti was specifically designed for small to large game hunting and precision rifle shooting. It ships with the new Direct Thread Brake Mount and RXD flash hiding front cap that helps reduce blast baffle erosion and muzzle flash, respectively.SpecificationsCaliber Rating6.5 Creedmoor, .308 Win, up to 300 PRCEnergy Rating4400 Ft-Lbs.Bore Diameter.30 caliberLength7.34"Materials6AL4V TitaniumFinishBlack and Burnt Bronze CerakoteMinimum Barrel Length RestrictionsMagnum calibers (up to .30 cal): 20” Sub-magnum calibers (5.56 NATO, .308 Win, etc.): 12.5” Subsonic (.300 BLK): 6”Full Auto RatedNoPart NumberRXD30TiBLK, RXD30TiBBSilencer CategoryRXD SilencersWeight12.4 Oz

Nomad Ti XCThe next chapter of the venerable Nomad Ti is here – the Nomad Ti XC. XC designates Cross-Country, a term we gave the silencer lineup that lets you go further thanks to its minimal weight, while seamlessly integrating into all of your hunts and adventures.You already know the jaw-dropping performance of the Nomad, but with the application of additive manufacturing technologies, we’re advancing the patented Nomad baffle technology to new levels. Our Nomad XC series now features an enhanced two-stage coaxial baffle system with pressure-harnessing structures that regulate both low-pressure and high-pressure rounds. We’re squeezing even more strength per ounce out of the Nomad Ti XC while providing even better sound performance and precision, no matter what you are shooting.Hunters and precision shooters already have enough on their minds to take, or even get the right shot. The extreme lightweight and phenomenal sound suppression make the Nomad Ti XC the ideal choice when covering distance and speed are part of the game.Silencer CategoryRifle SilencersCaliber Rating.300 RUMEnergy Rating4400 ft lbsBore Diameter.30 caliberLength6.35” (Body), 6.74” (Direct Thread), 7.03“ (w/Xeno Adapter)Diameter1.76 inchesWeight7.4 oz (Body), 9.6 oz (Direct Thread), 9.7 oz (w/Xeno adapter)MaterialsGrade 5 6A1-4V TitaniumFinishRaw titanium satin bead-blasted, black, or FDE high temp Cerakote®, Nitride adapter and mountUsageBolt-action, semi-auto. For ultimate sound reduction and weight savings.MountDead Air HUB compatibleMSRP$1099Barrel Restrictions12.5” supersonic (5.56 NATO), 6” subsonic (.300 BLK)Full Auto RatedNoPart NumberNOMADTIXCXENOBLK, NOMADTIXCXENOFDE, NOMADTIXCXENOSIL, NOMADTIXCDTBLK, NOMADTIXCDTFDE, NOMADTIXCDTSILPatent No.20230228513

Nomad Ti XCThe next chapter of the venerable Nomad Ti is here – the Nomad Ti XC. XC designates Cross-Country, a term we gave the silencer lineup that lets you go further thanks to its minimal weight, while seamlessly integrating into all of your hunts and adventures.You already know the jaw-dropping performance of the Nomad, but with the application of additive manufacturing technologies, we’re advancing the patented Nomad baffle technology to new levels. Our Nomad XC series now features an enhanced two-stage coaxial baffle system with pressure-harnessing structures that regulate both low-pressure and high-pressure rounds. We’re squeezing even more strength per ounce out of the Nomad Ti XC while providing even better sound performance and precision, no matter what you are shooting.Hunters and precision shooters already have enough on their minds to take, or even get the right shot. The extreme lightweight and phenomenal sound suppression make the Nomad Ti XC the ideal choice when covering distance and speed are part of the game.Silencer CategoryRifle SilencersCaliber Rating.300 RUMEnergy Rating4400 ft lbsBore Diameter.30 caliberLength6.35” (Body), 6.74” (Direct Thread), 7.03“ (w/Xeno Adapter)Diameter1.76 inchesWeight7.4 oz (Body), 9.6 oz (Direct Thread), 9.7 oz (w/Xeno adapter)MaterialsGrade 5 6A1-4V TitaniumFinishRaw titanium satin bead-blasted, black, or FDE high temp Cerakote®, Nitride adapter and mountUsageBolt-action, semi-auto. For ultimate sound reduction and weight savings.MountDead Air HUB compatibleMSRP$1099Barrel Restrictions12.5” supersonic (5.56 NATO), 6” subsonic (.300 BLK)Full Auto RatedNoPart NumberNOMADTIXCXENOBLK, NOMADTIXCXENOFDE, NOMADTIXCXENOSIL, NOMADTIXCDTBLK, NOMADTIXCDTFDE, NOMADTIXCDTSILPatent No.20230228513

Nomad Ti XCThe next chapter of the venerable Nomad Ti is here – the Nomad Ti XC. XC designates Cross-Country, a term we gave the silencer lineup that lets you go further thanks to its minimal weight, while seamlessly integrating into all of your hunts and adventures.You already know the jaw-dropping performance of the Nomad, but with the application of additive manufacturing technologies, we’re advancing the patented Nomad baffle technology to new levels. Our Nomad XC series now features an enhanced two-stage coaxial baffle system with pressure-harnessing structures that regulate both low-pressure and high-pressure rounds. We’re squeezing even more strength per ounce out of the Nomad Ti XC while providing even better sound performance and precision, no matter what you are shooting.Hunters and precision shooters already have enough on their minds to take, or even get the right shot. The extreme lightweight and phenomenal sound suppression make the Nomad Ti XC the ideal choice when covering distance and speed are part of the game.Silencer CategoryRifle SilencersCaliber Rating.300 RUMEnergy Rating4400 ft lbsBore Diameter.30 caliberLength6.35” (Body), 6.74” (Direct Thread), 7.03“ (w/Xeno Adapter)Diameter1.76 inchesWeight7.4 oz (Body), 9.6 oz (Direct Thread), 9.7 oz (w/Xeno adapter)MaterialsGrade 5 6A1-4V TitaniumFinishRaw titanium satin bead-blasted, black, or FDE high temp Cerakote®, Nitride adapter and mountUsageBolt-action, semi-auto. For ultimate sound reduction and weight savings.MountDead Air HUB compatibleMSRP$1099Barrel Restrictions12.5” supersonic (5.56 NATO), 6” subsonic (.300 BLK)Full Auto RatedNoPart NumberNOMADTIXCXENOBLK, NOMADTIXCXENOFDE, NOMADTIXCXENOSIL, NOMADTIXCDTBLK, NOMADTIXCDTFDE, NOMADTIXCDTSILPatent No.20230228513

Sandman XThe Sandman X is the pinnacle of Dead Air’s unwavering commitment to performance and an evolution to the venerable Sandman line. The Sandman X incorporates decades of research to give users the most pleasurable shooting experience possible by optimizing sound, balancing backpressure, and eliminating flash to increase performance for semi-automatic and bolt action rifles alike.Caliber RatingUp to .300 RUMEnergy Rating4200 ft lbsBore Diameter.30 caliberLength6.4”(Xeno), 6.9”(Keymo)Diameter1.65 inchesWeight14.5 oz (Xeno), 16.8 oz (Keymo)MaterialsHaynes® 282FinishBlack and FDE Cerakote®UsageProfessional-grade heavy-duty useBarrel RestrictionsNoneFull Auto RatedYesPart NumberSMXXNBLK, SMXXNFDE, SMXKMBLK, SMXKMFDEPatent No.20230228513 & 11441867B2

The Overwatch762 suppressor is purpose-built for gas-operated Designated Marksman Rifles (DMRs) such as the AR10, while also delivering exceptional performance on bolt-action sniper platforms. Manufactured using Direct Metal Laser Sintering (DMLS) from lightweight Grade 5 Titanium, it provides outstanding strength-to-weight performance, thermal stability, and corrosion resistance for extended use in demanding environments. Featuring a highly efficient radial turbine baffle system, the Overwatch762 redirects expanding gases into a coaxial annular vent system to reduce back pressure and improve gas flow. This advanced internal architecture minimizes blowback, enhances gas-operated cycling reliability, and maintains consistent sound suppression across a wide range of multi-caliber platforms, including 7.62 NATO, .308 Win, and 6.5 Creedmoor.End CapEngineered with an internal four prong flash hider for reduced flash signature and improved sound wave disruption.Track PatternTested and proven construction, strengthened where it matters.1.375x24 Threads & Wrench FlatsIndustry standard HUB/Bravo mount threads and wrench flats allow fast, secure mounting for quick detach muzzle devices and adapters.Overwatch762™ Suppressor full specsP/N: OW762Caliber: 7.62Length: 6.75 inchesDiameter: 1.62 inchesWeight: 10.1 ouncesMaterial(s): Grade 5 Titanium (Ti-6Al-4V)Finish: C-102 Graphite Black CerakoteFull Auto Rated: YESBarrel Restrictions: 14.5" for 7.62 NATO, 7" for 300BLK supersonic, 10.3" for 5.56 NATOCaliber Compatibility: 5.56 up to 7.62, optimized for 7.62 NATO

The Vanish556 represents the next evolution of Exigent Suppressor technology—setting a new benchmark in sound performance in a compact, lightweight package. Engineered through advanced Direct Metal Laser Sintering additive manufacturing and constructed from aerospace-grade Grade 5 Titanium (Ti-6Al-4V), this suppressor combines unmatched strength, minimal weight, sound suppression and gas mitigation. What sets the Vanish556 apart is not only its sound performance but also its proprietary coaxial venting system, designed for dynamic gas flow management that effectively reduces back pressure, minimizes blowback, and improves overall system reliability. This innovative internal architecture enhances shooter comfort and operational safety while reducing wear on host weapon components—making it the ideal combination of sound performance, reduced back pressure, and long-term operational use.Flash HiderEngineered with an internal four prong flash hider and directional high flow gas ports for reduced flash signature, improved sound wave disruption, and channelized gas flow away from the operator.Track PatternDesigned, tested, tested, tested, and re-tested to prove evolutionary concepts to construct the new standard in suppressor performance.1.375x24 HUB Threads & Wrench FlatsIndustry standard HUB/Bravo mount threads and wrench flats allow fast, secure mounting for quick detach muzzle devices and adapters.Engineered for optimal operator safety and comfort, the Vanish556™ features a unique coaxial venting system that effectively modulates the dynamic gas flow impulse to reduce back pressure and minimize gas blowback. This advanced forward flow design efficiently dissipates harmful gases away from the shooter, significantly reducing toxic exposure and improving overall shooting conditions during sustained or high-volume fire. The Vanish556 not only protects the operator but also protects the host weapon components by reducing wear from increased bolt speed often found with more restrictive higher back pressure suppressors. Constructed from lightweight, aerospace-grade Grade 5 Titanium (Ti-6Al-4V) with an operating temperature over 900°F, the Vanish556 offers exceptional heat resistance and structural integrity—even under extended use. Its inherent corrosion resistance ensures reliable performance across harsh and varied environments. The suppressor’s compact package and weight-saving design enhances firearm maneuverability and reduces operator fatigue in critical scenarios. Finished in Cerakote C-Series® C-102 Graphite Black, the suppressor gains an additional barrier against heat, abrasion, and environmental wear. The ultra-matte finish resists fading, scratches, and thermal discoloration while maintaining a low visual signature in tactical conditions. Combining a low back pressure system, premium aerospace materials, and a durable protective finish, the Vanish556 delivers an ultra quiet lightweight, durable, and high-performance suppressor solution ideal for law enforcement, military, and tactical operators as well as civilians. The Vanish556 is engineered for precision, durability, sound performance, and uncompromising operator safety.Vanish556™ Suppressor full specsP/N: V556Caliber: 5.56 NATOLength: 6 inchesDiameter: 1.75 inchesWeight: 10.2 ouncesMaterial(s): Grade 5 Titanium (Ti-6Al-4V)Finish: C-102 Graphite Black CerakoteFull Auto Rated: YESBarrel Restrictions: 10.3 inches +Caliber Compatibility: Optimized for 5.56 NATO / .223 Rem 

Direct thread, tubeless 5.56mm silencers prioritizing simplicity, minimal weight, and sound reduction. Can be pinned and welded on 10.5? or longer barrels to achieve a +16? overall barrel length.DescriptionThe GP (General Purpose) Mod 5 suppressors were designed to provide the customer with a tubeless, lightweight, durable, and affordable suppressor for general use. Constructed entirely of laser-welded 17-4 stainless steel and utilizing our patented ECO-FLOW™ baffle technology, GP suppressors are both durable and high performance.Front and rear 3/4? (or 19mm) wrench flats provide options for traditional use or forend rail integrated applications. GP suppressors come pre-drilled with a .125? hole for pinning to create “one stamp guns”. The GP5 can be pinned on a barrel as short as 10.5? The GP5 is a .22 caliber aperture silencer rated for use up to and including 220 swift. The GP series provides quality, engineering, construction, versatility, and affordability in one.Every component in the GP5 is manufactured from high strength, high temperature, corrosion resistant alloys.KEY FEATURES:Laser-welded constructionLight Weight Tubeless Design1/2×28 TPI Threads3/4? Wrench Flat mounting geometry for easy installationPre-Drilled for pinning and welding for a 1 stamp gunShim set included for Pin and Weld ApplicationsFull Auto RatedHigh strength, high temp, corrosion resistant 17-4ph Stainless SteelSilencer Accessory Bag IncludedChoice of Black or FDE Cerakote Finish

This titanium suppressor from Gunwerks offers the same great performance of the original 6IX suppressor but with a 40% weight reduction! Long range is the game... and this new silencer has been engineered with two primary objectives.One, Gunwerks focused on a reliable, repeatable performance on precision rifles, which means minimal POI shift and no loss of the rifle's ability to print tight groups.Second, this suppressor was designed to optimize sound suppression and performance on modern magnum hunting cartridges. This suppressor was designed for modern cartridges in the 6.5mm to 30 caliber range with caliber-specific bore reducers available for further fine-tuning.Technical Specications:Length: 6.2"Diameter: 1.5"Weight: 6 ozMaterial: Grade 5 TitaniumFinish: Tungsten - High Temp CerakoteThread Type: Tapered Thread Adapter (1/2X28 and 5/8X24)What's in the Box:Gunwerks 6IX Titanium Suppressor30 Cal Bore Reducer1/2X28 and 5/8X24 Thread AdaptersOwners Manual

Long Range Hunting Suppressors From GunwerksThey say silence is golden, but we like ours in matte black Cerakote. Introducing the 6IX and 8IGHT suppressors from Gunwerks!Long range is our game. And as such, we engineered these new silencers around two primary objectives.First, we focused on reliable, repeatable performance on precision rifles, which means minimal point of impact shift and no loss of a rifle's ability to print tight groups.Second, we optimized suppressor design around sound suppression and performance on modern magnum hunting cartridges. The industry standard has been to build cans around 5.56 and 7.62 military rounds, which don't translate as well to hunting and long range applications. The Gunwerks 6IX and 8IGHT are designed and optimized for modern cartridges in the 6.5mm to 30 caliber range with caliber-specific bore reducers available for further fine-tuning.Gunwerks 6IX+ SuppressorSpecificationsLength: 6.5"Diameter: 1.7"Weight: 12.6 oz. (14.8 oz with thread adapter and reducer)Material: Hardened 17-4 Stainless SteelFinish: Matte Black - High Temperature CerakoteThread Type: Tapered thread adapter: 1/2x28 and 5/8x24 includedBore Reducers: 30 caliber included, additional reducers available for 6mm, 6.5mm and 7mm

HUXWRX Flow 762 Ti – Titanium Flow-Through® Suppressor for .308 & MoreThe HUXWRX Flow 762 Ti harnesses Flow-Through Technology™ to minimize backpressure and gas blowback on .308, 7.62, and other 30-cal cartridges—all with no barrel length restrictions. This 3D-printed titanium suppressor weighs just 11.8 oz and measures 6.7 inches for a compact, lightweight form factor that excels on hunting rifles, carbines, and precision setups alike.Engineered with HUXWRX’s torque lock mounting and a tapered fit, the Flow 762 Ti remains secure under rapid fire. Thanks to zero back pressure design, you can forgo gas adjustments, ensuring smoother operation on AR-10s, AK variants, SCAR rifles, and more. Whether you’re seeking a durable titanium suppressor for .308 or a flow-through can to tame piston-driven rifles, the Flow 762 Ti is a cutting-edge choice.FEATURES & BENEFITSThe HUXWRX Safety Co. 762Ti is lighter than its little brother, weighing in at just 11.8oz, and is compact, making it the perfect compact rifle silencer. Though it's small in size, it lives up to the signature suppression performance of other HUXWRX Safety Co. products. The minimal weight and length of 6.1in make this suppressor ideal for use on hunting rifles as well as hard-use carbines while offering zero back pressure.The HUXWRX torque lock mounting system aligns on a taper for optimal accuracy and concentricity, and when paired with the Flow-Through design, the rifle suppressor won't come loose when firing. Plus it’s light as a feather, like adding a whisper to your rifle.Backed by HUXWRX’s lifetime warranty, you can shoot the FLOW 762 Ti confidently. This innovative product follows in the footsteps of the longevity and durability of other HUXWRX products. Tap into the benefits of Flow-Through Silencer Technology.KEY ATTRIBUTES OF THE HUXWRX FLOW 762 TIFlow-Through Technology® – for minimal backpressure and a smoother experienceCerakote Finish – resistance that protects against corrosion and wearInnovative 3D-printed design – for durability and high performanceCompact Powerhouse – Don’t let its light weight fool you. This bad boy packs a punch in the silence department, proving that good things do come in small packages. HuxWrx Torque Lock® Mounting System – secure fit for optimal accuracyTitanium Toughness: Embrace the ruggedness of the wild with a suppressor built to last a lifetime. Forged from premium-grade titanium, the Flow 762 Ti offers unmatched durability without weighing you down.Improved Recoil Control: Experience enhanced control with every shot and a design that reduces recoil and muzzle climbA Statement of Heritage: Owning a HUXWRX Flow 762 Ti is more than an upgrade to your arsenal—it's an investment in a tradition of excellence among a community of enthusiasts who demand the best in performance, durability, and innovation.TECHNICAL SPECIFICATIONSWeight: 11.8 ozLength: 6.7”Diameter: 1.8”Materials: Grade 5 TitaniumFinish/Color: C-Series Cerakote Matte Black or FDEAttachment: QDWHAT’S IN THE BOXFLOW 762 Ti SuppressorHUXWRX Muzzle Brake

The X-NASO, named after the scientific name for a long nosed Mongoose (Xenogale Naso) is the recommended 9mm suppressor for use with the Mongoose PCC.Materials: AluminumFinish: Hard Coat AnodizedMount: Direct Thread Piston 1/2-28 (Nielsen device/muzzle booster)Packaging includes:(1) servicing tool for removable core 

Description for Polonium-30The polonium-30 came about following the success of the Polonium and Polonium-K in 5.56Made for the person who is on a budget and just wants 1 suppressor to change around on all of their rifles this suppressor follows the same design goals of every product we make – good, durable, affordable suppressors for the working man that punch above their price point. PSSST… I’ve got a dirty little secret other companies have been lying to you about for years to make a sale.. You do give up 5.56 performance when you go to a 30 caliber bore. The data is out there, the truth is out there, it just is what it is, any company that tells you their 30 caliber suppressor doesn’t experience this is lying to you and we just want to get that out in the open front and center. If you are after the best possible 5.56 performance the Polonium and Polonium-K in 5.56 both out perform the Polonium-30 when shooting a 5.56 rifle. I’d rather tell you that and lose a sale than you buy one and be disappointed based on a lie I sold you, that’s just who we are. But if you’re on a budget and looking for 1 suppressor you can switch around to all of your rifles and have respectable performance across all platforms with a mounting system of your choice the Polonium-30 can handle anything you can throw on it, guaranteed. From a full auto short barrel 5.56 rifle, 300 blackout, 308 all the way up to the big daddy 300 RUM and 300 Norma magnum.The unique look comes from external weight reduction, removing all unnecessary material to keep the weight down but still as strong as possible – this results in a suppressor that has 10% more surface area and a lower weight that sheds heat faster and cools down quicker. The highly effective built in internal and external flash hider offer superior flash and signature reduction over the competition when using night vision.The polonium-30 features industry standard universal 1.375×24 rear threads so you can pick what mounting system best fits your needs. SPECSThe Polonium series of suppressors are made from H900 heat treated 17-4 stainless steel and constructed as a CNC welded tubeless design.Length: Polonium & Polonium-30 — 5.8, Polonium-K — 4.8”Weight: Polonium & Polonium-30 — 13.5 oz, Polonium-K — 11.5 oz (weights taken with no mount)OD: 1.625” Barrel length restrictions7.5” – 5.56/223 and 7.62×3910.5” – 6 ARC, 6.5 Grendel and other similar cartridges12.5” – 308, 6.5 creedmoor, 6mm creedmoor, 243 winchester and other similar cartridges16” – 300 win mag, 7mm rem mag, 300 PRC and other similar cartridges18” – 300 RUM and 300 Norma magFull auto rated – no BS. Responsible belt fed rated on 16” 5.56 belt fed machine guns. Do not exceed 300 round strings without cool down.

Constructed out of 6Al-4V Grade 5 Titanium and CNC welded the lithium was designed from the ground up to offer the best weight to suppression ratio of any 9mm SMG/PCC suppressor on the market.It uses internal features and venting to help reduce port pop on direct blowback operating systems and features industry standard 1.375×24 (also known as HUB/ASR Bravo) rear mounting threads to easily be adapted to the mounting system of your choice. The lithium 9 is compatible with 3 lug and booster/piston mounts and can be used on 9mm handguns.SpecsLength: 6” (no mount)Weight: 5.7 oz (no mount)OD: 1.5”Barrel Length / Firing Schedule9mm: Full auto rated, no barrel length restrictions.300 blackout subsonic: Full auto rated, no barrel length restrictions.300 blackout supersonic: Semi auto, 7 inch barrels and longer.357 magnum lever action rifles: Yes, 4 inch barrel length restriction.350 legend, 300 HAMR: Semi auto, 16 inch barrels and longer223/5.56: Semi auto with intent to keep temperature down/low volume use, barrel must be 16 inches or longer.308 Winchester/6.5 Creedmoor: Bolt action hunting applications only/low volume use, 20 inch barrel or longer.Because the Lithim has a smaller blast chamber than most typical rifle suppressors a direct thread mount must be used if it’s being fired on 350 legend, 300 HAMR, 223/5.56, 308 and 6.5 Creedmoor and other similar cartridges so that you have maximum blast chamber volume not being occupied by a muzzle device.What’s in the box?Suppressor1/2×28 Titanium direct thread mount (ZR0)Tube clampStickers

Description for Polonium-30The polonium-30 came about following the success of the Polonium and Polonium-K in 5.56Made for the person who is on a budget and just wants 1 suppressor to change around on all of their rifles this suppressor follows the same design goals of every product we make – good, durable, affordable suppressors for the working man that punch above their price point. PSSST… I’ve got a dirty little secret other companies have been lying to you about for years to make a sale.. You do give up 5.56 performance when you go to a 30 caliber bore. The data is out there, the truth is out there, it just is what it is, any company that tells you their 30 caliber suppressor doesn’t experience this is lying to you and we just want to get that out in the open front and center. If you are after the best possible 5.56 performance the Polonium and Polonium-K in 5.56 both out perform the Polonium-30 when shooting a 5.56 rifle. I’d rather tell you that and lose a sale than you buy one and be disappointed based on a lie I sold you, that’s just who we are. But if you’re on a budget and looking for 1 suppressor you can switch around to all of your rifles and have respectable performance across all platforms with a mounting system of your choice the Polonium-30 can handle anything you can throw on it, guaranteed. From a full auto short barrel 5.56 rifle, 300 blackout, 308 all the way up to the big daddy 300 RUM and 300 Norma magnum.The unique look comes from external weight reduction, removing all unnecessary material to keep the weight down but still as strong as possible – this results in a suppressor that has 10% more surface area and a lower weight that sheds heat faster and cools down quicker. The highly effective built in internal and external flash hider offer superior flash and signature reduction over the competition when using night vision.The polonium-30 features industry standard universal 1.375×24 rear threads so you can pick what mounting system best fits your needs. SPECSThe Polonium series of suppressors are made from H900 heat treated 17-4 stainless steel and constructed as a CNC welded tubeless design.Length: Polonium & Polonium-30 — 5.8, Polonium-K — 4.8”Weight: Polonium & Polonium-30 — 13.5 oz, Polonium-K — 11.5 oz (weights taken with no mount)OD: 1.625” Barrel length restrictions7.5” – 5.56/223 and 7.62×3910.5” – 6 ARC, 6.5 Grendel and other similar cartridges12.5” – 308, 6.5 creedmoor, 6mm creedmoor, 243 winchester and other similar cartridges16” – 300 win mag, 7mm rem mag, 300 PRC and other similar cartridges18” – 300 RUM and 300 Norma magFull auto rated – no BS. Responsible belt fed rated on 16” 5.56 belt fed machine guns. Do not exceed 300 round strings without cool down.

OPERATING SYSTEM: Semi-Auto - Direct ImpingementCALIBER: 8.6 BlackoutWEIGHT: 5 lbs 8 ozBARREL LENGTH: 12 inchesBARREL MATERIAL: 416R Stainless SteelBARREL FINISH: Bead BlastedTWIST RATE: 1:3MUZZLE DEVICE: XL Cherry BombTHREADS: M18x1.5 (Tapered Shoulder)MAG TYPE: SR-25MAG CAPACITY: 20QTY MAGS INCLUDED: 1LENGTH OF PULL: Collapsed: 8.375 inches - Extended: 13 inchesTRIGGER TYPE: Literally The Best Trigger Ever MadeTRIGGER WEIGHT: 3.25 lb - 3.75 lbSAFETY: AR-15 Style AmbiSTOCK TYPE: 2 Position, collapsibleGRIP TYPE: Reptilia CQG-NBHANDGUARD: Q-Sert, 11 inchesHANDGUARD MATERIAL: 6061TOP RAIL: Continuous M1913 Picatinny Top RailTOP RAIL MATERIAL: 7075RECEIVER MATERIAL: 7075RECEIVER FINISH: Clear, Hardcoat AnodizeOVERALL LENGTH: Collapsed: 26.75 inches - Extended: 31.25 inchesOVERALL WIDTH: 1.5 inchesHEIGHT: 7.25 inches

The Q El Camino is designed to to be an amazingly quiet rimfire suppressor, and it nailed it. Q’s El Camino ticks all the boxes a rimfire shooter could ask for: lightweight, easy to maintain and, most of all, quiet. Rated for full-auto fire, this 5.9” can’s titanium body and stainless steel baffles can handle brick after brick of .22, all day long.Cleaning your .22 can is important, the El Camino suppressor shines with its easy takedown and cleaning, requiring no more tools than a standard 1/2" socket wrench. This, combined with its ubiquitous 1/2x28 threading and ½-inch socket interface, you’re left with one of the easiest suppressors to maintain.FEATURES & BENEFITSThe Q El Camino is one of those suppressors that just makes you smile when you shoot it. With subsonic ammo it approaches “Hollywood quiet” levels. Additionally, the clever construction of hard-to-tarnish yet easy-to-clean lightweight materials make the El Camino incredibly user friendly.Rated for more than just .22lr, the El Camino can handle 17 HMR, and 5.7x28mm thanks to the high strength stainless steel baffle stack. It is easily attached to your firearms with its 1/2x28 direct thread mount.KEY ATTRIBUTES OF THE Q EL CAMINOMulti Caliber Rated: Suppress 22LR, 17HMR, and 5.7X28MM with ease.Quick and Easy Cleaning: Disassembly and maintenance is a breeze.All Day Durable: Steel baffles and a titanium tube make this silencer robust, it can handle high round counts without issue.Comically Quiet: The El Camino is a joy to shoot, just try it for yourself.TECHNICAL SPECIFICATIONSLength: 5.9"Weight: 4.3 ozDiameter: .99"Build Material: Stainless Steel, TitaniumFinish: PVDFull Auto Rated: YesMount: 1/2-28WHAT’S IN THE BOXQ El Camino SuppressorUniQue pouch1/2x28 rifle thread spacerUser manual