ACCU-WASHER MUZZLE ALIGNMENT SYSTEM 1/2X28 THREAD Simply choose the correct size Accu-Washer® shim to accurately index your muzzle brake or flash suppressor while maintaining perfect bore alignment. Since only one shim is required, the tolerance stackups and complexities associated with peel washers and other multi-shim systems are eliminated. This minimizes the risk of baffle strikes, ensuring maximum accuracy and safety from your muzzle brake or suppressor. Includes 18 individually marked Accu-Washer™ shims (timing adjustable from 0-360 degrees in 20-deg increments) and easy to follow instructions. Precision machined from high strength 400 series stainless steel to a guaranteed thickness uniformity of ±0.0001". All shims feature an oxide blasted non-reflective surface finish for low visibility. One Accu-Washer System will align approximately nine brakes (on average) before replenishment shims are needed. Designed to fit 1/2-28 or 5/8-24 threaded barrels.

ACCU-WASHER MUZZLE ALIGNMENT SYSTEM 5/8X24 THREAD Simply choose the correct size Accu-Washer® shim to accurately index your muzzle brake or flash suppressor while maintaining perfect bore alignment. Since only one shim is required, the tolerance stackups and complexities associated with peel washers and other multi-shim systems are eliminated. This minimizes the risk of baffle strikes, ensuring maximum accuracy and safety from your muzzle brake or suppressor. Includes 18 individually marked Accu-Washer™ shims (timing adjustable from 0-360 degrees in 20-deg increments) and easy to follow instructions. Precision machined from high strength 400 series stainless steel to a guaranteed thickness uniformity of ±0.0001". All shims feature an oxide blasted non-reflective surface finish for low visibility. One Accu-Washer System will align approximately nine brakes (on average) before replenishment shims are needed. Designed to fit 1/2-28 or 5/8-24 threaded barrels.

The Gamma 556SL is the perfect muzzle device for your pinned and welded builds.  The Gamma 556SL is long enough to provide an overall length of 16" when permanently affixed to the barrel. Its outside diameter of .745 inches allows you to install and service your gas system without removing the muzzle brake. The 3-chamber design looks great on any standard profile barrel while effectively eliminating recoil leaving your rifle shooting flat and soft.

AGH GRP TCK DOUBLE STACK SBCMPCT 4" The Grip Tuck Universal Holster is designed to holster any pistol of the same frame size as your gun. A textured fabric outer shell with a polymer insert that fully protects the trigger guard when the pistol is inserted for safe'” secure carry. An adjustable belt clip is included for IWB carry. Made in the USA.

AGH GRP TCK SINGLE STACK CMPCT 4" RH The Grip Tuck Universal Holster is designed to holster any pistol of the same frame size as your gun. A textured fabric outer shell with a polymer insert that fully protects the trigger guard when the pistol is inserted for safe, secure carry. An adjustable belt clip is included for IWB carry. Made in the USA.Features :Universal IWB Fit,Fits Single Stack Compact Pistols with 3.5? to 4? Barrels,Textured Fabric Outer Shell with Polymer InsertAdjustable Clip for IWB CarryMade in the U.S.A.

AGH SHPSHFT SLDE HLSTR FOR GLK 17 Alien Gear Holsters, Shape Shift Slide, Black, Fits Glock-17/31 (Gen1-5), Glock-22 (Gen 1-4), Shadow Systems DR920, Right Hand

AGH SHPSHFT SLDE HLSTR FOR GLK 19 RH Alien Gear Holsters Shape Shift Slide Holster, Black, Fits Glock 19, Right Hand SSSL-0057-RHModel: Shape Shift SlideHand: Right HandFit: Fits Glock 19Manufacturer: Alien Gear HolstersModel: Shape Shift Slide

THE ACRO P-2 IN SNIPER GREY.Aimpoint® has once again advanced the standard for pistol mounted optics with the introduction of the Acro P-2™ red dot sight. Thisnext generation sight incorporates an improved LED emitter coupled with a higher capacity CR2032 battery to provide an astonishing five years (50,000 hours) of constant-on power while getting you on target faster and more accurately. Designed to endure the physical forces generated by semi-automatic pistol slides, the ACRO™ series was the first pistol sight to offer a fully enclosed optical channel to protect the LED emitte.Built to exceed the requirements of professional users, the Acro P-2 has been tested and proven to withstand the extreme shock, vibration, temperatures, and material stresses generated by firing over 20,000 rounds of .40 S&W ammunition. The new high efficiency LED emitter provides a sharp 3.5 MOA dot. Protective clear glass front and rear lenses guard the advanced reflective lens system. The new digital intensity adjustment keypad provides a more distinct tactile feel when adjusting the dot intensity, and these controls are now placed next to the battery compartment to help protect the power adjustments against unintentional changes. In addition to use as a primary optic on handguns, the Acro P-2 can be mounted on carbines, shotguns and rifles or utilized as a backup sight on magnified scopes and thermal imagers. The sight can be mounted on a wide range of optics-ready handguns using adapter plates. It is night vision compatible, and the dot can also be turned up for use in bright sunlight. Aimpoint red dot sights are operationally parallax-free, which means the visible dot remains parallel to the bore of your weapon no matter what angle your eye is in relation to the sight. Therefore, the user never has to worry about centering the dot inside the sight. If you have a proper zero, when the dot is on the target, so are you. Aimpoint red dot sights increase confidence by allowing the shooter to focus on the target while keeping both eyes open, fully situationally aware at all times. Users can achieve first round hits faster with greater confidence.UNIQUE FEATURES3.5 MOA red dot for precision and fast target acquisitionBattery life: 50,000 hours (over 5 years) of constant operation with one battery on setting 6Battery type: CR2032 battery (battery included)Battery can be quickly changed without removing opticVariety of mounting options sold separatelyOptimized for pistol and applications which require a low-profile red dot systemFully enclosed housing protects all electronic components of the sight from all elementsSealed optical channel protects the optic from rain, mud, sand, or snow7075-T6 High-strength Aluminum Hard-anodized with Cerakoate H-Series grey coating10 brightness settings: 4 night vision compatible settings and 6 daylight settings1X (non-magnifying) operationally parallax free opticSubmersible to 115 feet (35 meters)Temperature span -49°F to +160°FWeight 2.1 oz / 60 g (sight only)Size 1.9” x 1.3” x 1.2” (L x W x H)

The Aimpoint® CompM5 is a compact, lightweight, and extremely rugged red dot optic in the Comp™ series of sights. The CompM5™ sight was designed to take up minimal space on the weapon platform while still offering extreme ruggedness and durability. The unmatched optical clarity and ability to withstand the demands of professional end-users is why the CompM5 is currently used and trusted by top tier end users throughout the free world. New innovative lenses with cutting-edge reflective coatings, radically improve the shape of the 2 MOA dot. ACET technology allows 50,000 hours (over 5 years) of constant operation with one AAA battery on setting 7. The CompM5 sight has a high battery compartment while the CompM5s™ has a low battery compartment. The CompM5 optic features recessed lenses with protective flip-up lens covers. The front cover is solid and rear is transparent – allowing the user to shoot with both eyes open while the lens caps are closed in an emergency situation. The sight housing is constructed of hard-anodized aluminum alloy for optimal protection of the electronic and optical components in all types of environmental conditions. Aimpoint 3XMag-1™ and 6XMag-1™ magnifiers and all generations of night vision devices pair perfectly with the CompM5 sight. This optic is sold without a mount. A wide variety of Aimpoint Micro mounts are available through the Official Aimpoint store. Aimpoint red dot sights are operationally parallax-free, which means the visible dot remains parallel to the bore of your weapon no matter what angle your eye is in relation to the sight. Therefore, the user never has to worry about centering the dot inside the sight. If you have a proper zero, when the dot is on the target, so are you. Aimpoint red dot sights increase confidence by allowing the shooter to focus on the target while keeping both eyes open, fully situationally aware at all times. Users can achieve first round hits faster with greater confidence.UNIQUE FEATURES2 MOA red dot for precision and fast target acquisitionBattery life: 50,000 hours (over 5 years) of constant operation with one battery on setting 7Battery type: AAA battery (included)High battery compartmentFlip-up lens covers – front is solid, and rear is transparent – allowing the user to shoot with both eyes open and lens caps closed in an emergency situationAdvanced optical lenses for enhanced light transmission and ultimate dot clarity Reinforced protection of the turrets for even greater ruggednessHard anodized non-reflective surface 10 brightness settings: 4 night vision compatible settings and 6 daylight settings1X (non-magnifying) operationally parallax free opticSubmersible to 150 feet (45 meters)Temperature span -49°F to +160°FWeight 5.2 oz / 148 g (sight only)

ANDERSON MANUFACTURING PACKAGED AM-15 ASSEMBLED UPPER RECIEVER The AM-15 Assembled Upper Receiver comes with the dust cover and forward assist already installed. Featuring M4 feed ramps, this upper receiver is machined to Military Specifications & Standards and can be used with multiple calibers on the AR-15 platform.Match this Upper with one of our Lower Receivers for a solid fit for your AM-15 build.

The only correctly made mag extensions on the market.  Other magazine extensions on the market are simply rectangular blocks.  If you look at your magazine the bottom is angled so when you attach a competitors extension, it is not parallel with the column of cartridges in the magazine.  This probably works fine for +2 rounds, but it would not work for much if any more.  We decided to do it right, and cut the attachment rail at an angle to the pocket in the mag.  This means that the column of rounds travels straight down into the extension.  This took extra time on the mill and we chose to cut them in one operation on the 4th axis, but it was worth it to deliver to you the most advanced product of its kind.  The fluting around the sides make an excellent gripping point for mag changes and also helps to remove some weight.After starting with the American Rifle Company +4 mag extension, we realized that with a little bit of redesign that it could work equally well with AICS an Accurate mags.  The 419 universal mag extensions are designed to work on a variety of magazines from the ARC 10rd mag to AICS 5 or 10rd and Accurate Mag in either standard bolt face or on SAUM/WSM mags (these do not work on 223). They are NOT COMPATIBLE with AI AW magazines, as those have a fixed/welded floorplate.Easy install, great performance, and the quality you’ve come to expect from Area 419.Expected Capacity Increase:ARC 10-Rounders: +4 or +5 depending on cartridgeAICS & Accurate 10 Rd: +3 or +4 depending on cartridgeAICS & Accurate 5 Rd: +2 or +3 depending on cartridgeAccurate WSM 3 or 7 Rd: +3NOTE:  **THESE DO NOT WORK WITH MAGPUL OR ANY OTHER POLYMER AI MAGS**Weight .4 lbsDimensions 6 × 3.5 × 2 inColor BlackManufacturer Area 419

In our opinion these are the only correctly made mag extensions on the market.  Other magazine extensions on the market are simply rectangular blocks.  If you look at your magazine the bottom is angled so when you attach a competitors extension, it is not parallel with the column of cartridges in the magazine.  This probably works fine for +2 rounds, but it would not work for much if any more.  We decided to do it right, and cut the attachment rail at an angle to the pocket in the mag.  This means that the column of rounds travels straight down into the extension.  This took extra time on the mill and we chose to cut them in one operation on the 4th axis, but it was worth it to deliver to you the most advanced product of its kind.  The fluting around the sides make an excellent gripping point for mag changes and also helps to remove some weight.After starting with the American Rifle Company +4 mag extension, we realized that with a little bit of redesign that it could work equally well with AICS an Accurate mags.  The 419 universal mag extensions are designed to work on a variety of magazines from the ARC 10rd mag to AICS 5 or 10rd and Accurate Mag in either standard bolt face or on SAUM/WSM mags (these do not work on 223). They are NOT COMPATIBLE with AI AW magazines, as those have a fixed/welded floorplate.Easy install, great performance, and the quality you’ve come to expect from Area 419.Expected Capacity Increase:ARC 10-Rounders: +4 or +5 depending on cartridgeAICS & Accurate 10 Rd: +3 or +4 depending on cartridgeAICS & Accurate 5 Rd: +2 or +3 depending on cartridgeAccurate WSM 3 or 7 Rd: +3NOTE:  **THESE DO NOT WORK WITH MAGPUL OR ANY OTHER POLYMER AI MAGS**Weight .4 lbsDimensions 6 × 3.5 × 2 inColor BlueManufacturer Area 419

The only correctly made mag extensions on the market.  Other magazine extensions on the market are simply rectangular blocks.  If you look at your magazine the bottom is angled so when you attach a competitors extension, it is not parallel with the column of cartridges in the magazine.  This probably works fine for +2 rounds, but it would not work for much if any more.  We decided to do it right, and cut the attachment rail at an angle to the pocket in the mag.  This means that the column of rounds travels straight down into the extension.  This took extra time on the mill and we chose to cut them in one operation on the 4th axis, but it was worth it to deliver to you the most advanced product of its kind.  The fluting around the sides make an excellent gripping point for mag changes and also helps to remove some weight.After starting with the American Rifle Company +4 mag extension, we realized that with a little bit of redesign that it could work equally well with AICS an Accurate mags.  The 419 universal mag extensions are designed to work on a variety of magazines from the ARC 10rd mag to AICS 5 or 10rd and Accurate Mag in either standard bolt face or on SAUM/WSM mags (these do not work on 223). They are NOT COMPATIBLE with AI AW magazines, as those have a fixed/welded floorplate.Easy install, great performance, and the quality you’ve come to expect from Area 419.Expected Capacity Increase:ARC 10-Rounders: +4 or +5 depending on cartridgeAICS & Accurate 10 Rd: +3 or +4 depending on cartridgeAICS & Accurate 5 Rd: +2 or +3 depending on cartridgeAccurate WSM 3 or 7 Rd: +3NOTE:  **THESE DO NOT WORK WITH MAGPUL OR ANY OTHER POLYMER AI MAGS**Weight .4 lbsDimensions 6 × 3.5 × 2 inColor RedManufacturer Area 419

** THIS RAIL REQUIRES 6 CONSECUTIVE MLOK SLOTS TO ATTACH. FOR STOCKS WITH FEWER MLOK SLOTS, YOU’LL WANT A 12? UNIVERSAL RAIL WITH MLOK ATTACHMENT NUTS **Area 419 is always looking for ways to improve existing products when we are not developing new technologies. With the rapid growth in popularity of ARCA rails in precision rifle, we saw a need to improve this great dovetail technology to something that could be mechanically locked in place instead of just friction.  If you have ever tried using a Barricade stop on an existing ARCA rail, you’ve probably also seen it slide under much pressure.Introducing the ARCALOCK Dovetail Rail System *Rail is only locking with an Area 419 clamp*Rail Features:– Serrated rail sides interface with our proprietary clamp design to mechanically lock it in place so no movement is possible.  Serrations are not sharp, will not damage bags or your hands.– Rail is backwards compatible with standard Arca accessories, but will not be locking without our clamp– Rail is 12? long giving you the entire length of the stock forend for attachments.  The best part is, it still only weighs in at a paltry 4.1oz– Made to the RRS 1.5? Dovetail Standard, so you can be sure lever clamps will work– No sharp edges. Every corner is radiused, and every edge is chamfered on the machine. This takes longer to make, but it is the only right way.– Type 3 Hard Coat anodized for additional durability.– Made from 6061-T6 Aluminum– Made in-house here in the USA from USA sourced Aluminum on USA made CNCs– M-LOK Slots on underside of rail also allow you to attach any M-LOK accessories to the 419 Rail– Rail comes with all M-LOK mounting hardwareWeight .8 lbsDimensions 16 × 2.5 × 2.5 inManufacturer Area 419Color Flat Dark Earth

** THIS RAIL REQUIRES 3 CONSECUTIVE MLOK SLOTS TO ATTACH. **Area 419 is always looking for ways to improve existing products when we are not developing new technologies. With the rapid growth in popularity of ARCA rails in precision rifle, we saw a need to improve this great dovetail technology to something that could be mechanically locked in place instead of just friction.  If you have ever tried using a Barricade stop on an existing ARCA rail, you’ve probably also seen it slide under much pressure.Introducing the ARCALOCK Dovetail Rail System *Rail is only locking with an Area 419 clamp*Rail Features:– Serrated rail sides interface with our proprietary clamp design to mechanically lock it in place so no movement is possible.  Serrations are not sharp, will not damage bags or your hands.– Rail is backwards compatible with standard Arca accessories, but will not be locking without our clamp– Rail is 6? long and weighs in at a paltry 2.2oz– Made to the RRS 1.5? Dovetail Standard, so you can be sure lever clamps will work– No sharp edges. Every corner is radiused, and every edge is chamfered on the machine. This takes longer to make, but it is the only right way.– Type 3 Hard Coat anodized for additional durability.– Made from 6061-T6 Aluminum– Made in-house here in the USA from USA sourced Aluminum on USA made CNCs– Rail comes with all M-LOK mounting hardwareWeight .4 lbsDimensions 10 × 1 × 4 inManufacturer Area 419Finish Black Anodized, FDE Anodized

** THIS RAIL REQUIRES 3 CONSECUTIVE MLOK SLOTS TO ATTACH. **Area 419 is always looking for ways to improve existing products when we are not developing new technologies. With the rapid growth in popularity of ARCA rails in precision rifle, we saw a need to improve this great dovetail technology to something that could be mechanically locked in place instead of just friction.  If you have ever tried using a Barricade stop on an existing ARCA rail, you’ve probably also seen it slide under much pressure.Introducing the ARCALOCK Dovetail Rail System *Rail is only locking with an Area 419 clamp*Rail Features:– Serrated rail sides interface with our proprietary clamp design to mechanically lock it in place so no movement is possible.  Serrations are not sharp, will not damage bags or your hands.– Rail is backwards compatible with standard Arca accessories, but will not be locking without our clamp– Rail is 6? long and weighs in at a paltry 2.2oz– Made to the RRS 1.5? Dovetail Standard, so you can be sure lever clamps will work– No sharp edges. Every corner is radiused, and every edge is chamfered on the machine. This takes longer to make, but it is the only right way.– Type 3 Hard Coat anodized for additional durability.– Made from 6061-T6 Aluminum– Made in-house here in the USA from USA sourced Aluminum on USA made CNCs– Rail comes with all M-LOK mounting hardwareWeight .4 lbsDimensions 10 × 1 × 4 inManufacturer Area 419Finish FDE Anodized 

** THIS RAIL REQUIRES 6 CONSECUTIVE MLOK SLOTS TO ATTACH. FOR STOCKS WITH FEWER MLOK SLOTS, YOU’LL WANT A 12? UNIVERSAL RAIL WITH MLOK ATTACHMENT NUTS **Area 419 is always looking for ways to improve existing products when we are not developing new technologies. With the rapid growth in popularity of ARCA rails in precision rifle, we saw a need to improve this great dovetail technology to something that could be mechanically locked in place instead of just friction.  If you have ever tried using a Barricade stop on an existing ARCA rail, you’ve probably also seen it slide under much pressure.Introducing the ARCALOCK Dovetail Rail System *Rail is only locking with an Area 419 clamp*Rail Features:– Serrated rail sides interface with our proprietary clamp design to mechanically lock it in place so no movement is possible.  Serrations are not sharp, will not damage bags or your hands.– Rail is backwards compatible with standard Arca accessories, but will not be locking without our clamp– Rail is 12? long giving you the entire length of the stock forend for attachments.  The best part is, it still only weighs in at a paltry 4.1oz– Made to the RRS 1.5? Dovetail Standard, so you can be sure lever clamps will work– No sharp edges. Every corner is radiused, and every edge is chamfered on the machine. This takes longer to make, but it is the only right way.– Type 3 Hard Coat anodized for additional durability.– Made from 6061-T6 Aluminum– Made in-house here in the USA from USA sourced Aluminum on USA made CNCs– M-LOK Slots on underside of rail also allow you to attach any M-LOK accessories to the 419 Rail– Rail comes with all M-LOK mounting hardwareWeight .8 lbsDimensions 16 × 2.5 × 2.5 inManufacturer Area 419Color Black

Mounting adapter for the popular Send iT electronic level. Allows you to mount vertically (up or down) in any of the multiple mounting locations on our rings and mounts.Please be sure your Send iT level is new enough that is has the removable thumb screw mount, if it is not removable this will not work, and you will just want a standard Pic Rail.Machined from 6061 Aluminum, this product is Made in America and built to last.Weight .5 lbsDimensions 6 × 4 × 1 inIncludes Adapter ONLY

A scope level doesn’t need to be complicated, it needs to be visible, and needs to be repeatable. This accomplishes these things with a high visibility spirit vial, and a simple but versatile design that allows you to mount it to any of several mounting points on our rings and mounts, all based on your preference.Machined from 6061 Aluminum, this product is Made in America and built to last.Not compatible with the HUNT Scope RingsWeight .5 lbsDimensions 6 × 4 × 1 in

When we set out to make the perfect scope mount, we knew what we needed to make something that was reliable and consistent at a degree you won’t find anywhere else on the market. This led us down a rabbit-hole, ultimately arriving on a process that gets you final-bore matched rings, with raw aluminum internals, for a grip on your optic that is more reliable and more true than anything else made – as well as an incredible amount of robustness without adding unnecessary weight.Like most mounts, these begin as separate parts. We are making the bases and caps in batches. While many will make these parts, send them to anodize, and then just assemble, we produce around the extra steps. Once these parts return from anodize, they are fully assembled, placed back into specially produced rail fixtures, with the caps torqued to spec over specially made spacers (to give the rings space to torque down on the optic), and final-bored as sets in our world-class machining centers. Mounts are then brought off the machine in sets, QC’d and packaged, ensuring that you receive a mount that was finished perfectly.Is it overkill? Probably. But we think it’s the right way. So that’s what we are going to do.KEY FEATURESCNC Milled in America from American 7075 AluminumRaw aluminum, precision bored scope contact surfaces for maximum gripFinal-bored in sets, and never fully disassembled after boring8-9oz per mount, depending on model, balancing weight management and robustnessMultiple accessory mounting pointsSeparate rail clamping bars for maximum grab on the pic railInset clamping feet, allowing for maximum mounting adjustment and pic rail utilitySteel guide pins between base and caps, aiding in alignmentCustom nitrided stainless hardwareWeight 1.5 lbsDimensions 9.5 × 5.8 × 2.8 inTube Diameter 30mmHeight 39mm (1.54")Cant 0 MOA

When we set out to make the perfect scope mount, we knew what we needed to make something that was reliable and consistent at a degree you won’t find anywhere else on the market. This led us down a rabbit-hole, ultimately arriving on a process that gets you final-bore matched rings, with raw aluminum internals, for a grip on your optic that is more reliable and more true than anything else made – as well as an incredible amount of robustness without adding unnecessary weight.Like most mounts, these begin as separate parts. We are making the bases and caps in batches. While many will make these parts, send them to anodize, and then just assemble, we produce around the extra steps. Once these parts return from anodize, they are fully assembled, placed back into specially produced rail fixtures, with the caps torqued to spec over specially made spacers (to give the rings space to torque down on the optic), and final-bored as sets in our world-class machining centers. Mounts are then brought off the machine in sets, QC’d and packaged, ensuring that you receive a mount that was finished perfectly.Is it overkill? Probably. But we think it’s the right way. So that’s what we are going to do.KEY FEATURESCNC Milled in America from American 7075 AluminumRaw aluminum, precision bored scope contact surfaces for maximum gripFinal-bored in sets, and never fully disassembled after boringMultiple accessory mounting pointsSeparate rail clamping bars for maximum grab on the pic railInset clamping feet, allowing for maximum mounting adjustment and pic rail utilitySteel guide pins between base and caps, aiding in alignmentCustom nitrided stainless hardwareWeight 1.5 lbsDimensions 9.5 × 5.8 × 2.8 inTube Diameter 30mmHeight 39mm (1.54")Cant 0 MOA

When we set out to make the perfect scope mount, we knew what we needed to make something that was reliable and consistent at a degree you won’t find anywhere else on the market. This led us down a rabbit-hole, ultimately arriving on a process that gets you final-bore matched rings, with raw aluminum internals, for a grip on your optic that is more reliable and more true than anything else made – as well as an incredible amount of robustness without adding unnecessary weight.Like most mounts, these begin as separate parts. We are making the bases and caps in batches. While many will make these parts, send them to anodize, and then just assemble, we produce around the extra steps. Once these parts return from anodize, they are fully assembled, placed back into specially produced rail fixtures, with the caps torqued to spec over specially made spacers (to give the rings space to torque down on the optic), and final-bored as sets in our world-class machining centers. Mounts are then brought off the machine in sets, QC’d and packaged, ensuring that you receive a mount that was finished perfectly.Is it overkill? Probably. But we think it’s the right way. So that’s what we are going to do.KEY FEATURESCNC Milled in America from American 7075 AluminumRaw aluminum, precision bored scope contact surfaces for maximum gripFinal-bored in sets, and never fully disassembled after boringMultiple accessory mounting pointsSeparate rail clamping bars for maximum grab on the pic railInset clamping feet, allowing for maximum mounting adjustment and pic rail utilitySteel guide pins between base and caps, aiding in alignmentCustom nitrided stainless hardwareWeight 1.5 lbsDimensions 9.5 × 5.8 × 2.8 inTube Diameter 34mmHeight 39mm (1.54")Cant 0 MOA 

When we set out to make the perfect scope mount, we knew what we needed to make something that was reliable and consistent at a degree you won’t find anywhere else on the market. This led us down a rabbit-hole, ultimately arriving on a process that gets you final-bore matched rings, with raw aluminum internals, for a grip on your optic that is more reliable and more true than anything else made – as well as an incredible amount of robustness without adding unnecessary weight.Like most mounts, these begin as separate parts. We are making the bases and caps in batches. While many will make these parts, send them to anodize, and then just assemble, we produce around the extra steps. Once these parts return from anodize, they are fully assembled, placed back into specially produced rail fixtures, with the caps torqued to spec over specially made spacers (to give the rings space to torque down on the optic), and final-bored as sets in our world-class machining centers. Mounts are then brought off the machine in sets, QC’d and packaged, ensuring that you receive a mount that was finished perfectly.Is it overkill? Probably. But we think it’s the right way. So that’s what we are going to do.KEY FEATURESCNC Milled in America from American 7075 AluminumRaw aluminum, precision bored scope contact surfaces for maximum gripFinal-bored in sets, and never fully disassembled after boringMultiple accessory mounting pointsSeparate rail clamping bars for maximum grab on the pic railInset clamping feet, allowing for maximum mounting adjustment and pic rail utilitySteel guide pins between base and caps, aiding in alignmentCustom nitrided stainless hardwareWeight 1.5 lbsDimensions 9.5 × 5.8 × 2.8 inTube Diameter 34mmHeight 39mm (1.54")Cant 0 MOA

When we set out to make the perfect scope mount, we knew what we needed to make something that was reliable and consistent at a degree you won’t find anywhere else on the market. This led us down a rabbit-hole, ultimately arriving on a process that gets you final-bore matched rings, with raw aluminum internals, for a grip on your optic that is more reliable and more true than anything else made – as well as an incredible amount of robustness without adding unnecessary weight.Like most mounts, these begin as separate parts. We are making the bases and caps in batches. While many will make these parts, send them to anodize, and then just assemble, we produce around the extra steps. Once these parts return from anodize, they are fully assembled, placed back into specially produced rail fixtures, with the caps torqued to spec over specially made spacers (to give the rings space to torque down on the optic), and final-bored as sets in our world-class machining centers. Mounts are then brought off the machine in sets, QC’d and packaged, ensuring that you receive a mount that was finished perfectly.Is it overkill? Probably. But we think it’s the right way. So that’s what we are going to do.KEY FEATURESCNC Milled in America from American 7075 AluminumRaw aluminum, precision bored scope contact surfaces for maximum gripFinal-bored in sets, and never fully disassembled after boring8-9oz per mount, depending on model, balancing weight management and robustnessMultiple accessory mounting pointsSeparate rail clamping bars for maximum grab on the pic railInset clamping feet, allowing for maximum mounting adjustment and pic rail utilitySteel guide pins between base and caps, aiding in alignmentCustom nitrided stainless hardwareWeight 1.5 lbsDimensions 9.5 × 5.8 × 2.8 inTube Diameter 34mmHeight 39mm (1.54")Cant 0 MOA 

The ATLAS R-ONE is the newest addition to the Aero Precision Handguard lineup. Machined from 6061-T6 Aluminum, the R-ONE line of handguards are designed with size and weight in mind, providing the perfect handguard for your lightweight build. Our proprietary ATLAS attachment system is a durable and dependable mounting platform, maintaining a slim profile while still providing the strength and stability customers have grown to love from Aero Precision handguards.Available in KeyMod and M-LOK® profiles with 7", 9", 12" and 15" options.ATLASThe new Aero Taper Lock Attachment System (ATLAS) is both functional and aesthetically pleasing. It features 2 mirrored tapered locking nuts that provide evenly distributed clamping pressure across a custom engineered barrel nut with use of a turnbuckle screw. A ratcheting detent further secures the design while providing positive registration during installation. By design, the even pressure of the ATLAS system avoids distortion of the handguard often seen with current applications during installation.All hardware mounting parts are included with the purchase of an ATLAS Handguard.Lightweight By DesignM-LOK Handguard Weight: 15" - 9.07 ozMounting Hardware Weight: 4.72 oz (same across all ATLAS Handguard options)Features:Full top picatinny rail for optional attachmentsQuick disconnect sling socket at the 3, 6 and 9 o'clock positionsCompatible with low profile gas blocks1.3" Inside diameter1.5" Outside diameterCompatible with mil-spec AR15 upper receivers and barrelsNOT Compatible with M4E1 Enhanced Upper Receivers