The Nighthawk Custom single stack magazines are designed, engineered, and proven to be the most reliable and durable mags on the market. Each magazine is 100% proudly made in the USA. The Nighthawk Custom magazine tube and follower are constructed from heat treated, tempered stainless steel to provide strength and durability, while also being corrosion resistant. They are then tumbled and polished to minimize metal to metal friction, ensuring smooth reliable feeding and reloading. The hardened steel follower is designed to provide positive lock-back after the last round, while maintaining durability for a lifetime of use. The parallel feed lips are designed to position each round into the feed ramp at a consistent angle for enhanced reliability, no matter the ammo brand.The Nighthawk Custom 1911 magazines are easily disassembled for cleaning and routine maintenance while still maintaining a solid stop to prevent over insertion. Load indicators in the sides of the magazine allows you to see if magazine is loaded to capacity, without sacrificing strength to the structure of the main tube. The Nighthawk Custom logo is beautifully laser engraved in each mag. Upgrade your 1911 magazines to best on the market today.Specs9mmGovernment10 RoundsStainlessFeatures:Durable and reliable for all 1911 PistolsProudly 100% made in the USAIntegrated Feed RampHeat Treated Stainless SteelCorrosion resistantTumbled and polished minimizing any frictionHardened Steel FollowerConsistent, reliable reloadingCompatible with all ammoEasily removable base pads for maintenanceLoad indicator windows without sacrificing strengthPositive slide lock after last round is fired 

The Nighthawk Custom single stack magazines are designed, engineered, and proven to be the most reliable and durable mags on the market. Each magazine is 100% proudly made in the USA. The Nighthawk Custom magazine tube and follower are constructed from heat treated, tempered stainless steel to provide strength and durability, while also being corrosion resistant. They are then tumbled and polished to minimize metal to metal friction, ensuring smooth reliable feeding and reloading. The hardened steel follower is designed to provide positive lock-back after the last round, while maintaining durability for a lifetime of use. The parallel feed lips are designed to position each round into the feed ramp at a consistent angle for enhanced reliability, no matter the ammo brand.The Nighthawk Custom 1911 magazines are easily disassembled for cleaning and routine maintenance while still maintaining a solid stop to prevent over insertion. Load indicators in the sides of the magazine allows you to see if magazine is loaded to capacity, without sacrificing strength to the structure of the main tube. The Nighthawk Custom logo is beautifully laser engraved in each mag. Upgrade your 1911 magazines to best on the market today.*Welded bases are designed to fit flush with the bottom of the pistol, but still have the option to install a plastic bumper pad.Specs9mmGovernment9 RoundsStainlessFeatures:Durable and reliable for all 1911 PistolsProudly 100% made in the USAIntegrated Feed RampHeat Treated Stainless SteelCorrosion resistantTumbled and polished minimizing any frictionHardened Steel FollowerConsistent, reliable reloadingCompatible with all ammoLoad indicator windows without sacrificing strengthPositive slide lock after last round is fired

The Nighthawk Custom Agent 2 represents a seamless collaboration between Nighthawk Custom and Agency Arms, elevating the 1911 platform to a new echelon of excellence. This stunning firearm showcases the “One Gun, One Gunsmith” approach, where a single, highly skilled gunsmith meticulously handcrafts each pistol from start to finish. This attention to detail ensures that every aspect of the Agent 2 reflects exceptional quality and precise craftsmanship.Pushing the boundaries of the classic 1911 in terms of both form and function, the Agent 2 combines traditional gunsmithing techniques with cutting-edge machining methods to create a truly unique firearm. Its sleek, modern aesthetics and innovative features, such as aggressive slide serrations and a custom grip pattern, set it apart from other 1911s. The result is a beautiful, high-performance pistol that is both a joy to shoot and a work of art. The Nighthawk Custom Agent 2 is the embodiment of innovation and represents the pinnacle of 1911 evolution.FEATURES:Smoke Cerakote FinishForged Government Frame with Lightened Recon RailHand Fit Frame and SlideHand Fit Match Grade 9mm/.45ACP Bushing BarrelCrowned Flush-Cut BarrelFluted Barrel HoodFaceted Slide with Side WindowsAgency Front and Rear Cocking SerrationsMatching Texture on Front Strap, Back Strap, and ControlsExtended, Faceted, and Angled Magazine CatchOne-Piece Mainspring Housing/MagwellSolid Black Heinie Ledge Rear SightNighthawk Fiber Optic Front SightRailscales G10 GripsNighthawk/Agency Custom TriggerHand Polished Ignition ComponentsCustom Trigger Job Set with 3.5 to 3.75 Pound TriggerHand Beveled EdgesUltra Hi-Cut Front StrapIncludes Two 10-Round Magazines

With a rich history in combat, the Night Fighter is the ultimate combat knife. Fully designed and hand built by renowned bladesmith Steve Woods, this model has a track record of combat use. Used in the theater of war since 2004, this blade has been carried by Special Ops members and is adored by three-letter agencies. With an overall length of 11” and a cutting surface of 6”, this knife is ready for battle. The tan/black 2x2 layered G10 handles give you a sure grip on the knife in all situations. The blade has been forged from CPM 154 steel and is finished with a glass bead blast. Each finely crafted blade comes in at 58-59 Rockwell hardness. Stainless Torx #20 screws are used in the handle that also features Nighthawk Custom medallions. Each Night Fighter comes with a custom Kydex sheath with Blade-Tech Tek-Lok for horizontal or vertical carry.Blade Material: CPM 154 Steel Heat Treated to 58-59 Rockwell HardnessOverall Length: 11”Blade Length: 6”Handle Length: 5”Handle: G10Sheath: Custom Kydex Sheath with Blade-Tech Tek-Lok

The Night Hunter model has been completely designed and hand crafted by renowned bladesmith Steve Woods. This model boasts a 9” overall length with a 4” cutting surface. The blade has been forged from CPM 154 steel for a tough blade that can withstand the rigors of hard use and has been heated to a Rockwell hardness of 58-59. The scales have been crafted from double black G10 and feature Nighthawk Custom medallions on both sides. The blade has been given a glass bead blast finish for the perfect look. Stainless Torx #20 screws in the handle finish off this impressive knife. This model comes with a Kydex sheath with Blade-Tech Tek-Lok.Blade Material: CPM 154 Steel Heat Treated to 58-59 Rockwell HardnessOverall Length: 9”Blade Length: 4”Handle Length: 5”Handle: G10Sheath: Kydex with Blade-Tech Tek-Lok

Nighthawk Custom’s Model K901 knife is the perfect skinner knife for your next hunting trip. The 80CRV2 high carbon blade has been forged by bladesmith Sam Roddy. The blade measures 3.2” with an overall length of 7.3”. Mammoth bark has been used on the handle for a touch of class with mosaic pins adding to the look. This skinner features a leather lanyard and a single hand stitched leather sheath for easy carry. The blade has been heat treated to a 58-59 Rockwell Hardness.SpecificationsBlade Length: 3.2”Overall Length: 7.27”Handle Length: 4.01”Weight: 5.3 ozWidth: .79”Blade Material: 80CRV2 High CarbonHandle Material: Mammoth BarkAbout Sam Roddy:Sam Roddy is an impressive young bladesmith who trained under an Arkansas native bladesmith legend, Keith Murr. Roddy has been hand building knives here in the Ozarks since 2018. In 2020, he branched out on his own after getting his first belt grinder and opening his shop, Roddy Knives. Roddy now operates out of his personal shop in Huntsville, AR, about 30 minutes south of Nighthawk Custom. Roddy proudly forges his own steel and completely hand builds the knife using the same philosophy as us, but as One Blade, One Bladesmith. His Damascus patterns are created by taking 1080 and 15N20 steel and alternating them in 30-35 layers. He then heats that metal up to 2,300-2,400 degrees and uses a 25-ton press to forge the steel together. Next, he manipulates the Damascus to produce some incredible patterns that can be seen throughout his beautiful work. We are proud to offer exclusive designed Roddy Knife models through Nighthawk Custom.

When looking for a 1911 trigger upgrade for your pistol, a common improvement sought by shooters is a trigger job with a crisp, clean break. Until now, a high-quality trigger job has never been in the realm of a “drop-in” upgrade. Nighthawk Custom has changed that with the introduction of the Drop-In Trigger System (DTS) for 1911 pistols.An all-in-one unit, the DTS replaces your existing hammer, hammer strut, sear, disconnector, and sear spring. Your existing sear pin and hammer pin will be retained for use with the DTS, but no other parts are necessary for installation. With a steel housing securing the unit, the DTS features all Fully Machined™ internal components. The traditional three-pronged sear spring is no longer necessary as the springs for the disconnector and sear are built into the unit. A single-leg grip safety spring is included with the DTS to replace the existing sear spring.Never has a high-quality trigger job been this simple for 1911 shooters. The Drop-In Trigger System is designed for use in most 1911 models, and installation is simple enough that minimal gunsmithing skills are necessary. With a proper safety check and minor gunsmithing skills, the Drop-In Trigger System can give your current 1911 a high-quality trigger job in the time it takes for a routine cleaning of your pistol. Available with stainless or black nitride hammer.Approximately 3.75-4 lb trigger pull in most applications after the proper break-in period.Trigger pull may vary slightly from pistol to pistol depending on a variety of factors. We recommend a 500-round break-in period for final results.*Minor gunsmithing may be required.*In response to questions we have received from our customers, this Drop-In Trigger System is not used in our custom 1911 handguns. The DTS unit is meant to be utilized as an upgrade to production 1911s.Why choose the Nighthawk Custom Drop-In Trigger System over sending your pistol to a custom shop?Anyone can install the DTS. No serious gunsmithing is required.You get a clean and crisp, 3.75 - 4 lb trigger pull?in a matter of minutes.There is no sending your pistol off to a custom shop and then waiting 2-3 months to get it back.Minimal tools required to complete installation.The DTS is easily swapped to a backup pistol in a pinch.The DTS is perfect for the home gun builder who can assemble and fit minor parts but isn’t quite comfortable stoning sear and hammer surfaces.Average cost for custom trigger job is $380 including shipping

The BDS9 Commander is the next evolution in double stack 1911 performance, now available in a more compact 4.25” configuration. Built with the same precision engineering and premium features as the original 5” BDS9 Government, this Commander model offers enhanced carry potential without compromising shootability or capacity.Designed from the ground up to be a purpose-built double stack, the BDS9 Commander features a match-grade 4.25” barrel and a tri-cut slide that reduces weight and allows for faster cycling. The commander-length slide pairs perfectly with the lightweight, aggressively textured grip module for superior control and balance.Every part of the BDS9 Commander is hand-fit by a single gunsmith, delivering the level of craftsmanship and attention to detail that defines Nighthawk Custom. The optic-ready slide comes standard with a fully machined Novak-style rear sight and a fiber optic front sight, and is compatible with multiple red dot systems for those seeking faster target acquisition.Whether you're carrying concealed, competing on the range, or simply want a more compact version of a high-performance platform, the BDS9 Commander is engineered to exceed expectations.Key Features:Commander-length 4.25” match-grade barrelOptic-ready tri-cut slide with fiber optic front sightPurpose-built double stack frame with aggressive grip textureAccessory rail for light/laser attachmentHand-fit by a single gunsmith for unmatched precision and reliabilityCompatible with Nighthawk double stack magazinesFEATURES:Silver DLC finish with black DLC barrelAll Fully Machined PartsCommander size frame and 4.25" bull barrelHand fit frame and slideHand fit match grade 9mm barrelCrowned bull barrelThroated barrelPolished feed rampFull-length dust coverMonolithic recon frameFactory IOS optic readyHand blended grip safetyHeinie Ledge solid black rear sightFiber optic front sightAggressive grip textureLockback slide stop & disengaged slide stopHeavy angle, slide-lightening cutsTuned and polished extractorHand fit firing pin stopLightweight aluminum flat triggerHand polished ignition componentsCompletely dehornedHand beveled edgesUltra Hi-Cut Front StrapIncludes two 17-round magazinesFrame Size GovernmentCaliber 9 mmLight Rail RailSafety SingleHeight 5.8"Overall Length 7.76"Pistol Width 1.44Slide Width 0.92"Grip Thickness Nighthawk Double StackWeight Empty 36.0 ozSight Radius 5.81Barrel Length 4.25"Magazine Capacity 19Rear Sight Heinie Black LedgeFront Sight Fiber OpticFinish DLCFiring Pin Size .38 SuperFiring Pin Material Stainless Steel

1 of 1 Special Custom BuildSpecial Features include Double Stack Upgrade, Nighthawk IOS Sight Upgrade, Ambi Safety, Smoked Nitride Finish, and Gold Bead Front Sight Upgrade. Also includes a Trijicon RMR IOS Plate. The Nighthawk Custom Bob Marvel is a testament to innovation and superior craftsmanship, standing out in the Nighthawk lineup with its multiple unique features. This commander-sized 1911 combines a stroked slide and frame, a bull barrel, and an Everlast Recoil System to deliver unmatched accuracy, reliability, and reduced recoil. These enhancements make the Bob Marvel more efficient and pleasurable to shoot than a standard commander pistol.The pistol is equipped with a fully-adjustable BoMar rear sight, providing precise control over elevation and windage adjustments, while the unique front and rear cocking serrations on the slide offer a secure and easy grip for racking the slide.In addition to these performance-driven features, the Bob Marvel showcases exquisite attention to detail in its design. The one-piece magwell and mainspring housing (MSH) streamline the loading process and enhance the pistol's overall aesthetic. The hand-stippled top of the slide andFrench border add elegance and style to the firearm, while the solid aluminum trigger ensures consistent and smooth trigger pulls.The Bob Marvel is a truly exceptional firearm that lives up to its name, offering a shooting experience that is both reliable and marvelously precise. Its unique combination of features sets it apart in the world of 1911s and provides shooters with a firearm that is a joy to own and shoot.Black nitride finishAll Fully Machined partsCommander size frame and 4.25" crowned barrelHand fit frame and slideBull nose slideHeavy bevel on the bottom of the slideFrench borderThroated barrelPolished feed rampHand stippled top and rear of the slide1-piece magwell/mainspring housing without lanyard loopHand blended magwellEverlast Recoil SystemTuned and polished extractorHand fit firing pin stopBlacked out rear sightGold Bead front sight25 lines per inch checkered front strap and mainspringHand blended grip safetySolid aluminum Nighthawk Custom triggerHand polished ignition componentsCustom trigger job set with 3.5 to 3.75 pound triggerCompletely dehorned for comfortable carryHand beveled edgesUltra Hi-Cut Front StrapIncludes two 17-round magazines