When we set out to make the perfect scope mount, we knew what we needed to make something that was reliable and consistent at a degree you won’t find anywhere else on the market. This led us down a rabbit-hole, ultimately arriving on a process that gets you final-bore matched rings, with raw aluminum internals, for a grip on your optic that is more reliable and more true than anything else made – as well as an incredible amount of robustness without adding unnecessary weight.Like most mounts, these begin as separate parts. We are making the bases and caps in batches. While many will make these parts, send them to anodize, and then just assemble, we produce around the extra steps. Once these parts return from anodize, they are fully assembled, placed back into specially produced rail fixtures, with the caps torqued to spec over specially made spacers (to give the rings space to torque down on the optic), and final-bored as sets in our world-class machining centers. Mounts are then brought off the machine in sets, QC’d and packaged, ensuring that you receive a mount that was finished perfectly.Is it overkill? Probably. But we think it’s the right way. So that’s what we are going to do.KEY FEATURESCNC Milled in America from American 7075 AluminumRaw aluminum, precision bored scope contact surfaces for maximum gripFinal-bored in sets, and never fully disassembled after boringMultiple accessory mounting pointsSeparate rail clamping bars for maximum grab on the pic railInset clamping feet, allowing for maximum mounting adjustment and pic rail utilitySteel guide pins between base and caps, aiding in alignmentCustom nitrided stainless hardwareWeight 1.5 lbsDimensions 9.5 × 5.8 × 2.8 inTube Diameter 30mmHeight 39mm (1.54")Cant 0 MOA

When we set out to make the perfect scope mount, we knew what we needed to make something that was reliable and consistent at a degree you won’t find anywhere else on the market. This led us down a rabbit-hole, ultimately arriving on a process that gets you final-bore matched rings, with raw aluminum internals, for a grip on your optic that is more reliable and more true than anything else made – as well as an incredible amount of robustness without adding unnecessary weight.Like most mounts, these begin as separate parts. We are making the bases and caps in batches. While many will make these parts, send them to anodize, and then just assemble, we produce around the extra steps. Once these parts return from anodize, they are fully assembled, placed back into specially produced rail fixtures, with the caps torqued to spec over specially made spacers (to give the rings space to torque down on the optic), and final-bored as sets in our world-class machining centers. Mounts are then brought off the machine in sets, QC’d and packaged, ensuring that you receive a mount that was finished perfectly.Is it overkill? Probably. But we think it’s the right way. So that’s what we are going to do.KEY FEATURESCNC Milled in America from American 7075 AluminumRaw aluminum, precision bored scope contact surfaces for maximum gripFinal-bored in sets, and never fully disassembled after boringMultiple accessory mounting pointsSeparate rail clamping bars for maximum grab on the pic railInset clamping feet, allowing for maximum mounting adjustment and pic rail utilitySteel guide pins between base and caps, aiding in alignmentCustom nitrided stainless hardwareWeight 1.5 lbsDimensions 9.5 × 5.8 × 2.8 inTube Diameter 34mmHeight 39mm (1.54")Cant 0 MOA

When we set out to make the perfect scope mount, we knew what we needed to make something that was reliable and consistent at a degree you won’t find anywhere else on the market. This led us down a rabbit-hole, ultimately arriving on a process that gets you final-bore matched rings, with raw aluminum internals, for a grip on your optic that is more reliable and more true than anything else made – as well as an incredible amount of robustness without adding unnecessary weight.Like most mounts, these begin as separate parts. We are making the bases and caps in batches. While many will make these parts, send them to anodize, and then just assemble, we produce around the extra steps. Once these parts return from anodize, they are fully assembled, placed back into specially produced rail fixtures, with the caps torqued to spec over specially made spacers (to give the rings space to torque down on the optic), and final-bored as sets in our world-class machining centers. Mounts are then brought off the machine in sets, QC’d and packaged, ensuring that you receive a mount that was finished perfectly.Is it overkill? Probably. But we think it’s the right way. So that’s what we are going to do.KEY FEATURESCNC Milled in America from American 7075 AluminumRaw aluminum, precision bored scope contact surfaces for maximum gripFinal-bored in sets, and never fully disassembled after boring8-9oz per mount, depending on model, balancing weight management and robustnessMultiple accessory mounting pointsSeparate rail clamping bars for maximum grab on the pic railInset clamping feet, allowing for maximum mounting adjustment and pic rail utilitySteel guide pins between base and caps, aiding in alignmentCustom nitrided stainless hardwareWeight 1.5 lbsDimensions 9.5 × 5.8 × 2.8 inTube Diameter 34mmHeight 39mm (1.54")Cant 0 MOA 

Introducing the 1.93 inch bore height AUS Mount for 30mm diameter magnified optics, from Reptilia. Driven by the request of an end user group, the AUS Mount is the culmination of a 2 year development program. Like our DOT Mount line the AUS Mount attaches to any M1913 Picatinny rail via our anti-snag spring-loaded nitrided steel clamp and custom bolt mounting system which can be tightened with a T-25 Torx or a flat blade driver to sit flush with the body of the mount for a low-profile, streamline design. Also like our DOT Mount line, the AUS mount is machined from a single piece of billet 7075-T6 aluminum and is finished with MIL-STD Type III, Class 2, hard anodize coating.The AUS is compatible with all of our existing 30mm ROF line.

Introducing the 1.93 inch bore height AUS Mount for 30mm diameter magnified optics, from Reptilia. Driven by the request of an end user group, the AUS Mount is the culmination of a 2 year development program. Like our DOT Mount line the AUS Mount attaches to any M1913 Picatinny rail via our anti-snag spring-loaded nitrided steel clamp and custom bolt mounting system which can be tightened with a T-25 Torx or a flat blade driver to sit flush with the body of the mount for a low-profile, streamline design. Also like our DOT Mount line, the AUS mount is machined from a single piece of billet 7075-T6 aluminum and is finished with MIL-STD Type III, Class 2, hard anodize coating.The AUS is compatible with all of our existing 30mm ROF line.Like all Reptilia products, the AUS Mount is 100% made in the USA and carries a full lifetime warranty against manufacturer defects. 

Introducing the AUS Mount for 30mm diameter magnified optics, from Reptilia. Driven by the request of an end user group, the AUS Mount is the culmination of a 2 year development program. Like our DOT Mount line the AUS Mount attaches to any M1913 Picatinny rail via our anti-snag spring-loaded nitrided steel clamp and custom bolt mounting system which can be tightened with either a 5/32 hex or a flat blade driver to sit flush with the body of the mount for a low-profile, streamline design. Also like our DOT Mount line, the AUS mount is machined from a single piece of billet 7075-T6 aluminum and is finished with MIL-STD Type III, Class 2, hard anodize coating.The AUS is compatible with all of our existing 30mm ROF line, and will be compatible with several new ROF products launching over the coming months.Like all Reptilia products, the AUS Mount is 100% made in the USA and carries a full lifetime warranty against manufacturer defects.

Introducing the AUS Mount for 30mm diameter magnified optics, from Reptilia. Driven by the request of an end user group, the AUS Mount is the culmination of a 2 year development program. Like our DOT Mount line the AUS Mount attaches to any M1913 Picatinny rail via our anti-snag spring-loaded nitrided steel clamp and custom bolt mounting system which can be tightened with either a 5/32 hex or a flat blade driver to sit flush with the body of the mount for a low-profile, streamline design. Also like our DOT Mount line, the AUS mount is machined from a single piece of billet 7075-T6 aluminum and is finished with MIL-STD Type III, Class 2, hard anodize coating.The AUS is compatible with all of our existing 30mm ROF line, and will be compatible with several new ROF products launching over the coming months.Like all Reptilia products, the AUS Mount is 100% made in the USA and carries a full lifetime warranty against manufacturer defects.

Introducing the AUS Mount for 34mm diameter magnified optics, from Reptilia. Driven by the request of an end user group, the AUS Mount is the culmination of a 2 year development program. Like our DOT Mount line the AUS Mount attaches to any M1913 Picatinny rail via our anti-snag spring-loaded nitrided steel clamp and custom bolt mounting system which can be tightened with either a 5/32 hex or a flat blade driver to sit flush with the body of the mount for a low-profile, streamline design. Also like our DOT Mount line, the AUS mount is machined from a single piece of billet 7075-T6 aluminum and is finished with MIL-STD Type III, Class 2, hard anodize coating.The AUS is compatible with all of our existing 34mm ROF line, and will be compatible with several new ROF products launching over the coming months.Like all Reptilia products, the AUS Mount is 100% made in the USA and carries a full lifetime warranty against manufacturer defects.

Introducing the AUS Mount for 35mm diameter magnified optics, from Reptilia. Driven by the request of an end user group, the AUS Mounts are the culmination of a 2 year development program. Like our DOT Mount line the AUS Mount attaches to any M1913 Picatinny rail via our anti-snag spring-loaded nitrided steel clamp and custom bolt mounting system which can be tightened with either a 5/32 hex or a flat blade driver to sit flush with the body of the mount for a low-profile, streamline design. Also like our DOT Mount line, the AUS mount is machined from a single piece of billet 7075-T6 aluminum and is finished with MIL-STD Type III, Class 2, hard anodize coating.Like all Reptilia products, the AUS Mount is 100% made in the USA and carries a full lifetime warranty against manufacturer defects.