BCM PNT Trigger Assembly (Polished - Nickel - Teflon)BCM quality, modern manufacturing processes, and aerospace coatings are combined to ensure parts last a lifetime while performing far beyond requirements established nearly six decades ago.The BCM PNT Trigger and PNT Hammer are a precision machined Mil-Spec AISI8620 investment casting per the USGI TDP (Mil-Spec) for M16/M4 family of weapons. (not to be confused with MIM parts that are very common in the commercial market). 156/157 holes are honed to assist in perfect alignment and a smooth trigger pull.After that, the BCM PNT Trigger and PNT Hammer then goes through a 3 step heat treat and case hardening process for optimal grain structure alignment, yielding a stronger and more wear resistance product. PolishedThe sear engagement surfaces are ground, but then hand polished for an increased smoothness and reduction in friction up to 300% beyond the Mil-Spec. NickelAn electroless nickel finish is applied for a smoother trigger pull with less "grit" and reduced felt "creep". Nickel also provides a long lasting finish that will not corrode, rust, or discolor due to oxidation. TeflonTeflon particles are embedded in the nickel, further reducing the friction of the interface and ensuring a long lasting coating. This is done on both the BCM PNT Trigger and Hammer in order to provide the maximum benefit allowed by the nickel coating, by augmenting the low friction and corrosion resistance. This assembly includes our impact resistant trigger and hammer pins. They are centerless ground to a fine finish and superior tolerances to ensure compatibility with all MIL SPEC lower receivers built per the USGI TDP.The BCM Disconnector is stamped from a 1070 material and fine blanked for cleaner edges, double disc ground to precise size. All hammer engagement surfaces are also ground for a super clean reset. The processes and tolerances are matched in the BCM PNT Trigger Assembly to create a system better than the sum of its parts.As with all BCM products, Made in the USA. 

GEISSELE SPR SEMI-AUTO SSA LRG PIN

GEISSELE SSA-X TRIGGER Manufacturer: GeisseleTrigger Pull Weight: 4.25 - 4.75 lbTrigger Pin Size: Mil-SpecGun Make: AR PlatformGun Model: AR-10, AR-15Gun Type: RifleCondition: NewCountry of Origin: USA 

GEISSELE SUPER SEMI-AUTOMATIC SSA

GEISSELE SUPER TRICON TRIGGER Designed in cooperation with Jeff Gonzales former Navy SEAL of Trident Concepts, the Super Tricon Trigger comes standard with a two-stage design for safety and control; a carrot-like 2nd stage break; full-power hammer spring; tool steel construction; and unique trigger bow design with ribbed surface.The Super Tricon is a hybrid bow variant of the Super Semi-Automatic (SSA®) trigger. Please see the Super Dynamic Combat (SD-C) for the flat bow variant.

TIMNEY AR15 SMALL PIN SLD STRGHT 3LB

TIMNEY TRIG FITS AR15 4LB (SOLID)

TRIGGERTECH R700 DIAMOND BLK/GRN 2 STAGE RH 5oz-2.8 LBS

TRIGGERTECH R700 SPECIAL FLAT BLK SS RH 1-3.5 LBS