Bravo Company introduces the BCM® Stock Assembly - Mod 0 - SOPMOD (Widebody).The strongest light-weight polymer stock available for your mil-spec receiver extension is here!More pronounced cheekweld (SOPMOD type)Snag free Design. No sharp edges prevent tangling of the rifle with the shooter's sling, molle gear, or other kit.Modular VBOST (Vehicle Borne Operations Sling Tab) This tab interfaces with the shooter's riggers' band or bungee to secure the shooter's sling against the stock when the carbine is not in use. Increasingly, this is the most common application when operating inside a vehicle.2 different types of ambidextrous sling mounting options, including QD swivel sockets.Simple modular design. 6 parts, and 1 screw allow for modular adaption of future stock options and configurations.

The Magpul CTR (Compact/Type Restricted) – Mil-Spec model is a drop-in replacement buttstock for AR15 / M16 carbines using Mil-Spec sized receiver extension tubes. Designed for light, fast action, the streamlined A-frame profile avoids snagging and shields the release latch to prevent accidental activation.The CTR also features a supplemental friction lock system that minimizes excessive stock movement for enhanced weapon stability and an ambidextrous QD sling mount that will accept any push-button sling swivel. The Mil-Spec model includes a standard 0.3" thick rubber butt-pad, which provides positive shoulder purchase to prevent slippage even with body armor or modular gear.Made in the USA.ICONIC AR STOCKMounts on Mil-Spec sized carbine receiver extension tube (not included) from manufacturers such as Colt, Armalite, S&W, LMT, and others (please see the note below)SECURE "SET IT AND FORGET IT" FITShielded release latch prevents snagging and accidental operation while the supplemental friction lock minimizes accuracy-robbing wobble*THE RIGHT BALANCE OF CHEEK WELD AND COMFORTSloping cheek weld combines a slim profile with user comfortTechnical SpecificationsMore InformationCollection Collapsible Non-Storage AR StocksPlatform AR10, AR15, M4, M16, M110, SR25Compatibility Mil-Spec sized carbine receiver extension tube (not included) from manufacturers such as Colt, Armalite, S&W, LMT, and others*LOP, M4 Collapsed ~10.3 in.LOP, M4 Extended ~13.6 in.LOP Adjustment Range 3.3 in.Length, max 7.0 in.Height, max 5.2 in.Weight 8.9 oz.Weight, w/ receiver extension ~12.7 ozWidth, max 1.7 in.Other Specs *NOTE: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): Mil-Spec and Commercial-Spec. The CTR Carbine Stock will only fit with the common Mil-Spec tube.Specifications based on standard-length (flat-back) M4 Carbine receiver extension and may vary depending on tube manufacturer.Friction lock performance may vary depending on the host receiver extension's dimensional tolerances.

The PRS GEN3 is a field precision stock for AR15/M16 and AR10/SR25 platforms, featuring tool-less length of pull and cheek piece height adjustment.With solid adjustments for length of pull and cheek piece height via aluminum detent knobs, the PRS GEN3 (Precision Rifle/Sniper) stock provides a stable interface and is intended for semi-automatic sniper or varmint type rifles. Offering a nearly universal fit, it is optimized for Rifle-Length receiver extensions but will also mount to many Mil-Spec Carbine and A5-length tubes*. Includes a cant/height-adjustable rubber butt-pad and rotation-limiting QD sling swivel cups as well as M-LOK® slots on the bottom for rear monopod mounting.Made in the USA.HEIGHT & CANT ADJUSTABLE NON-SLIP RUBBER BUTT-PADRubber butt-pad provides positive shoulder purchase to prevent slippage and is adjustable for both cant and height. Enhanced strength butt-plate withstands severe impact and recoil up to .50 BMGTOOL-LESS COMB HEIGHT AND LENGTH OF PULL ADJUSTMENTMachined aluminum LOP and Cheek Piece adjustment knobs with positive locking click detents. Steel adjustment shafts finished with Melonite® for wear and corrosion resistanceSLING MOUNT OPTIONSFront/Rear - rotation-limited QD sling swivel sockets (swivels not included)Rear - 1.25" aluminum sling loop (left-right reversible)BOTTOM M-LOK SLOTS FOR MONOPOD/ACCESSORY MOUNTINGBottom M-LOK slots provide additional sling mounting possibilities or for attaching 1913 Picatinny rails for use with a monopodTechnical SpecificationsMore InformationCollection Fixed & Precision AR StocksPlatform AR10, AR15, M4, M16, M110, SR25Compatibility Mounts to Rifle-Length receiver extension tube without A2 spacer but may also accommodate Mil-Spec sized M4 Carbine and many A5-length tubes with standard Castle Nuts and End Plates (not included)*Cheek Height Adjustment Range 0.8 in.LOP, M4 Collapsed ~14.4 in.LOP, M4 Extended ~15.8 in.LOP Adjustment Range 1.4 in.Length 11.1-12.5 in.Height, max 5.2-6.0 in.Weight 27.8 oz.Weight, w/ receiver extension ~31.4 oz. w/Rifle-Length tubeWidth, max 1.7 in.Other Specs *NOTE: Due to the wide variety of designs and dimensions of Carbine receiver extensions as well as the associated mounting hardware, proper fit cannot be guaranteed.  Mounting to a Rifle-Length receiver extension is recommended to ensure optimal fit and function.Weight, w/Carbine receiver extension:  ~31.6 oz.

The PRS GEN3 is a field precision stock for AR15/M16 and AR10/SR25 platforms, featuring tool-less length of pull and cheek piece height adjustment.With solid adjustments for length of pull and cheek piece height via aluminum detent knobs, the PRS GEN3 (Precision Rifle/Sniper) stock provides a stable interface and is intended for semi-automatic sniper or varmint type rifles. Offering a nearly universal fit, it is optimized for Rifle-Length receiver extensions but will also mount to many Mil-Spec Carbine and A5-length tubes*. Includes a cant/height-adjustable rubber butt-pad and rotation-limiting QD sling swivel cups as well as M-LOK® slots on the bottom for rear monopod mounting.Made in the USA.HEIGHT & CANT ADJUSTABLE NON-SLIP RUBBER BUTT-PADRubber butt-pad provides positive shoulder purchase to prevent slippage and is adjustable for both cant and height. Enhanced strength butt-plate withstands severe impact and recoil up to .50 BMGTOOL-LESS COMB HEIGHT AND LENGTH OF PULL ADJUSTMENTMachined aluminum LOP and Cheek Piece adjustment knobs with positive locking click detents. Steel adjustment shafts finished with Melonite® for wear and corrosion resistanceSLING MOUNT OPTIONSFront/Rear - rotation-limited QD sling swivel sockets (swivels not included)Rear - 1.25" aluminum sling loop (left-right reversible)BOTTOM M-LOK SLOTS FOR MONOPOD/ACCESSORY MOUNTINGBottom M-LOK slots provide additional sling mounting possibilities or for attaching 1913 Picatinny rails for use with a monopodTechnical SpecificationsMore InformationCollection Fixed & Precision AR StocksPlatform AR10, AR15, M4, M16, M110, SR25Compatibility Mounts to Rifle-Length receiver extension tube without A2 spacer but may also accommodate Mil-Spec sized M4 Carbine and many A5-length tubes with standard Castle Nuts and End Plates (not included)*Cheek Height Adjustment Range 0.8 in.LOP, M4 Collapsed ~14.4 in.LOP, M4 Extended ~15.8 in.LOP Adjustment Range 1.4 in.Length 11.1-12.5 in.Height, max 5.2-6.0 in.Weight 27.8 oz.Weight, w/ receiver extension ~31.4 oz. w/Rifle-Length tubeWidth, max 1.7 in.Other Specs *NOTE: Due to the wide variety of designs and dimensions of Carbine receiver extensions as well as the associated mounting hardware, proper fit cannot be guaranteed.  Mounting to a Rifle-Length receiver extension is recommended to ensure optimal fit and function.Weight, w/Carbine receiver extension:  ~31.6 oz.