ACCU-WASHER MUZZLE ALIGNMENT SYSTEM 5/8X24 THREAD Simply choose the correct size Accu-Washer® shim to accurately index your muzzle brake or flash suppressor while maintaining perfect bore alignment. Since only one shim is required, the tolerance stackups and complexities associated with peel washers and other multi-shim systems are eliminated. This minimizes the risk of baffle strikes, ensuring maximum accuracy and safety from your muzzle brake or suppressor. Includes 18 individually marked Accu-Washer™ shims (timing adjustable from 0-360 degrees in 20-deg increments) and easy to follow instructions. Precision machined from high strength 400 series stainless steel to a guaranteed thickness uniformity of ±0.0001". All shims feature an oxide blasted non-reflective surface finish for low visibility. One Accu-Washer System will align approximately nine brakes (on average) before replenishment shims are needed. Designed to fit 1/2-28 or 5/8-24 threaded barrels.

The Gamma 556SL is the perfect muzzle device for your pinned and welded builds.  The Gamma 556SL is long enough to provide an overall length of 16" when permanently affixed to the barrel. Its outside diameter of .745 inches allows you to install and service your gas system without removing the muzzle brake. The 3-chamber design looks great on any standard profile barrel while effectively eliminating recoil leaving your rifle shooting flat and soft.

The only correctly made mag extensions on the market.  Other magazine extensions on the market are simply rectangular blocks.  If you look at your magazine the bottom is angled so when you attach a competitors extension, it is not parallel with the column of cartridges in the magazine.  This probably works fine for +2 rounds, but it would not work for much if any more.  We decided to do it right, and cut the attachment rail at an angle to the pocket in the mag.  This means that the column of rounds travels straight down into the extension.  This took extra time on the mill and we chose to cut them in one operation on the 4th axis, but it was worth it to deliver to you the most advanced product of its kind.  The fluting around the sides make an excellent gripping point for mag changes and also helps to remove some weight.After starting with the American Rifle Company +4 mag extension, we realized that with a little bit of redesign that it could work equally well with AICS an Accurate mags.  The 419 universal mag extensions are designed to work on a variety of magazines from the ARC 10rd mag to AICS 5 or 10rd and Accurate Mag in either standard bolt face or on SAUM/WSM mags (these do not work on 223). They are NOT COMPATIBLE with AI AW magazines, as those have a fixed/welded floorplate.Easy install, great performance, and the quality you’ve come to expect from Area 419.Expected Capacity Increase:ARC 10-Rounders: +4 or +5 depending on cartridgeAICS & Accurate 10 Rd: +3 or +4 depending on cartridgeAICS & Accurate 5 Rd: +2 or +3 depending on cartridgeAccurate WSM 3 or 7 Rd: +3NOTE:  **THESE DO NOT WORK WITH MAGPUL OR ANY OTHER POLYMER AI MAGS**Weight .4 lbsDimensions 6 × 3.5 × 2 inColor BlackManufacturer Area 419

In our opinion these are the only correctly made mag extensions on the market.  Other magazine extensions on the market are simply rectangular blocks.  If you look at your magazine the bottom is angled so when you attach a competitors extension, it is not parallel with the column of cartridges in the magazine.  This probably works fine for +2 rounds, but it would not work for much if any more.  We decided to do it right, and cut the attachment rail at an angle to the pocket in the mag.  This means that the column of rounds travels straight down into the extension.  This took extra time on the mill and we chose to cut them in one operation on the 4th axis, but it was worth it to deliver to you the most advanced product of its kind.  The fluting around the sides make an excellent gripping point for mag changes and also helps to remove some weight.After starting with the American Rifle Company +4 mag extension, we realized that with a little bit of redesign that it could work equally well with AICS an Accurate mags.  The 419 universal mag extensions are designed to work on a variety of magazines from the ARC 10rd mag to AICS 5 or 10rd and Accurate Mag in either standard bolt face or on SAUM/WSM mags (these do not work on 223). They are NOT COMPATIBLE with AI AW magazines, as those have a fixed/welded floorplate.Easy install, great performance, and the quality you’ve come to expect from Area 419.Expected Capacity Increase:ARC 10-Rounders: +4 or +5 depending on cartridgeAICS & Accurate 10 Rd: +3 or +4 depending on cartridgeAICS & Accurate 5 Rd: +2 or +3 depending on cartridgeAccurate WSM 3 or 7 Rd: +3NOTE:  **THESE DO NOT WORK WITH MAGPUL OR ANY OTHER POLYMER AI MAGS**Weight .4 lbsDimensions 6 × 3.5 × 2 inColor BlueManufacturer Area 419

The only correctly made mag extensions on the market.  Other magazine extensions on the market are simply rectangular blocks.  If you look at your magazine the bottom is angled so when you attach a competitors extension, it is not parallel with the column of cartridges in the magazine.  This probably works fine for +2 rounds, but it would not work for much if any more.  We decided to do it right, and cut the attachment rail at an angle to the pocket in the mag.  This means that the column of rounds travels straight down into the extension.  This took extra time on the mill and we chose to cut them in one operation on the 4th axis, but it was worth it to deliver to you the most advanced product of its kind.  The fluting around the sides make an excellent gripping point for mag changes and also helps to remove some weight.After starting with the American Rifle Company +4 mag extension, we realized that with a little bit of redesign that it could work equally well with AICS an Accurate mags.  The 419 universal mag extensions are designed to work on a variety of magazines from the ARC 10rd mag to AICS 5 or 10rd and Accurate Mag in either standard bolt face or on SAUM/WSM mags (these do not work on 223). They are NOT COMPATIBLE with AI AW magazines, as those have a fixed/welded floorplate.Easy install, great performance, and the quality you’ve come to expect from Area 419.Expected Capacity Increase:ARC 10-Rounders: +4 or +5 depending on cartridgeAICS & Accurate 10 Rd: +3 or +4 depending on cartridgeAICS & Accurate 5 Rd: +2 or +3 depending on cartridgeAccurate WSM 3 or 7 Rd: +3NOTE:  **THESE DO NOT WORK WITH MAGPUL OR ANY OTHER POLYMER AI MAGS**Weight .4 lbsDimensions 6 × 3.5 × 2 inColor RedManufacturer Area 419

** THIS RAIL REQUIRES 6 CONSECUTIVE MLOK SLOTS TO ATTACH. FOR STOCKS WITH FEWER MLOK SLOTS, YOU’LL WANT A 12? UNIVERSAL RAIL WITH MLOK ATTACHMENT NUTS **Area 419 is always looking for ways to improve existing products when we are not developing new technologies. With the rapid growth in popularity of ARCA rails in precision rifle, we saw a need to improve this great dovetail technology to something that could be mechanically locked in place instead of just friction.  If you have ever tried using a Barricade stop on an existing ARCA rail, you’ve probably also seen it slide under much pressure.Introducing the ARCALOCK Dovetail Rail System *Rail is only locking with an Area 419 clamp*Rail Features:– Serrated rail sides interface with our proprietary clamp design to mechanically lock it in place so no movement is possible.  Serrations are not sharp, will not damage bags or your hands.– Rail is backwards compatible with standard Arca accessories, but will not be locking without our clamp– Rail is 12? long giving you the entire length of the stock forend for attachments.  The best part is, it still only weighs in at a paltry 4.1oz– Made to the RRS 1.5? Dovetail Standard, so you can be sure lever clamps will work– No sharp edges. Every corner is radiused, and every edge is chamfered on the machine. This takes longer to make, but it is the only right way.– Type 3 Hard Coat anodized for additional durability.– Made from 6061-T6 Aluminum– Made in-house here in the USA from USA sourced Aluminum on USA made CNCs– M-LOK Slots on underside of rail also allow you to attach any M-LOK accessories to the 419 Rail– Rail comes with all M-LOK mounting hardwareWeight .8 lbsDimensions 16 × 2.5 × 2.5 inManufacturer Area 419Color Flat Dark Earth

** THIS RAIL REQUIRES 3 CONSECUTIVE MLOK SLOTS TO ATTACH. **Area 419 is always looking for ways to improve existing products when we are not developing new technologies. With the rapid growth in popularity of ARCA rails in precision rifle, we saw a need to improve this great dovetail technology to something that could be mechanically locked in place instead of just friction.  If you have ever tried using a Barricade stop on an existing ARCA rail, you’ve probably also seen it slide under much pressure.Introducing the ARCALOCK Dovetail Rail System *Rail is only locking with an Area 419 clamp*Rail Features:– Serrated rail sides interface with our proprietary clamp design to mechanically lock it in place so no movement is possible.  Serrations are not sharp, will not damage bags or your hands.– Rail is backwards compatible with standard Arca accessories, but will not be locking without our clamp– Rail is 6? long and weighs in at a paltry 2.2oz– Made to the RRS 1.5? Dovetail Standard, so you can be sure lever clamps will work– No sharp edges. Every corner is radiused, and every edge is chamfered on the machine. This takes longer to make, but it is the only right way.– Type 3 Hard Coat anodized for additional durability.– Made from 6061-T6 Aluminum– Made in-house here in the USA from USA sourced Aluminum on USA made CNCs– Rail comes with all M-LOK mounting hardwareWeight .4 lbsDimensions 10 × 1 × 4 inManufacturer Area 419Finish Black Anodized, FDE Anodized

** THIS RAIL REQUIRES 3 CONSECUTIVE MLOK SLOTS TO ATTACH. **Area 419 is always looking for ways to improve existing products when we are not developing new technologies. With the rapid growth in popularity of ARCA rails in precision rifle, we saw a need to improve this great dovetail technology to something that could be mechanically locked in place instead of just friction.  If you have ever tried using a Barricade stop on an existing ARCA rail, you’ve probably also seen it slide under much pressure.Introducing the ARCALOCK Dovetail Rail System *Rail is only locking with an Area 419 clamp*Rail Features:– Serrated rail sides interface with our proprietary clamp design to mechanically lock it in place so no movement is possible.  Serrations are not sharp, will not damage bags or your hands.– Rail is backwards compatible with standard Arca accessories, but will not be locking without our clamp– Rail is 6? long and weighs in at a paltry 2.2oz– Made to the RRS 1.5? Dovetail Standard, so you can be sure lever clamps will work– No sharp edges. Every corner is radiused, and every edge is chamfered on the machine. This takes longer to make, but it is the only right way.– Type 3 Hard Coat anodized for additional durability.– Made from 6061-T6 Aluminum– Made in-house here in the USA from USA sourced Aluminum on USA made CNCs– Rail comes with all M-LOK mounting hardwareWeight .4 lbsDimensions 10 × 1 × 4 inManufacturer Area 419Finish FDE Anodized 

** THIS RAIL REQUIRES 6 CONSECUTIVE MLOK SLOTS TO ATTACH. FOR STOCKS WITH FEWER MLOK SLOTS, YOU’LL WANT A 12? UNIVERSAL RAIL WITH MLOK ATTACHMENT NUTS **Area 419 is always looking for ways to improve existing products when we are not developing new technologies. With the rapid growth in popularity of ARCA rails in precision rifle, we saw a need to improve this great dovetail technology to something that could be mechanically locked in place instead of just friction.  If you have ever tried using a Barricade stop on an existing ARCA rail, you’ve probably also seen it slide under much pressure.Introducing the ARCALOCK Dovetail Rail System *Rail is only locking with an Area 419 clamp*Rail Features:– Serrated rail sides interface with our proprietary clamp design to mechanically lock it in place so no movement is possible.  Serrations are not sharp, will not damage bags or your hands.– Rail is backwards compatible with standard Arca accessories, but will not be locking without our clamp– Rail is 12? long giving you the entire length of the stock forend for attachments.  The best part is, it still only weighs in at a paltry 4.1oz– Made to the RRS 1.5? Dovetail Standard, so you can be sure lever clamps will work– No sharp edges. Every corner is radiused, and every edge is chamfered on the machine. This takes longer to make, but it is the only right way.– Type 3 Hard Coat anodized for additional durability.– Made from 6061-T6 Aluminum– Made in-house here in the USA from USA sourced Aluminum on USA made CNCs– M-LOK Slots on underside of rail also allow you to attach any M-LOK accessories to the 419 Rail– Rail comes with all M-LOK mounting hardwareWeight .8 lbsDimensions 16 × 2.5 × 2.5 inManufacturer Area 419Color Black

Rail section is made of Hard Anodized Aircraft Aluminum Alloy.Made to the Mil-Standard 1913 Picatinny Arsenal Specifications.Features a Snag resistant design, while retaining Mil-Standards.M-LOK Compatible. 

The BCM®™'s Grip (GFG) featuresReduced angle for improved ergonomicsHinged trap door offering storage inside the grip with a water resistant rubber gasketEach grip includes both an extended modular insert to close the gap between the trigger guard and pistol grip, and a smooth modular insert for use with some rifles with larger built in trigger guards. (user can decide which one to install)Made in the USA and manufactured from high quality impact resistant polymers.Test fit to ensure proper function (may display attributes consistent with this QC process) 

The BCM's Grip (GFG) featuresReduced angle for improved ergonomicsHinged trap door offering storage inside the grip with a water resistant rubber gasketEach grip includes both an extended modular insert to close the gap between the trigger guard and pistol grip, and a smooth modular insert for use with some rifles with larger built in trigger guards. (user can decide which one to install)Made in the USA and manufactured from high quality impact resistant polymers.Test fit to ensure proper function (may display attributes consistent with this QC process) 

Kinesthetic Angled Grip - KAGThe KAG is the end result of collaboration between BCM® and Travis Haley, founder of Haley Strategic Partners and inventor of multiple weapons manipulation enhancements in the firearms industry.Designed to complement modern shooting grips, the Kinesthetic Angled Grip (KAG) uses a biomechanically efficient forward rake to create an interface for positive retention and joint relief to the wrist, elbow, and shoulder, allowing for smooth weapon manipulation without substantial increase to the girth of the weapon system. Textured on both front and back, the profile of the KAG creates a channel for consistent and positive engagement which translates directly into improved efficiency in weapons manipulation and target to target transitions. Forward rake gives positive retention when using "C-clamp" (thumb over bore) method of handguard supportWorks as a rest for supported firing positionsSlight angle without significant bulk adds just the right amount of relief to the wrist without substantially increasing the girth of the handguardSmall profile is just enough to get repeatable hand position on weapon forendTextured in front and back for positive engagementMade in the U.S.A. from high quality, impact resistant polymers. 

KAG-MCMR (M-LOK® Compatible*)Kinesthetic Angled Grip - KAGThe KAG is the end result of collaboration between BCM® and Travis Haley, founder of Haley Strategic Partners and inventor of multiple weapons manipulation enhancements in the firearms industry.Designed to complement modern shooting grips, the Kinesthetic Angled Grip (KAG) uses a biomechanically efficient forward rake to create an interface for positive retention and joint relief to the wrist, elbow, and shoulder, allowing for smooth weapon manipulation without substantial increase to the girth of the weapon system. Textured on both front and back, the profile of the KAG creates a channel for consistent and positive engagement which translates directly into improved efficiency in weapons manipulation and target to target transitions. Forward rake gives positive retention when using "C-clamp" (thumb over bore) method of handguard supportWorks as a rest for supported firing positionsSlight angle without significant bulk adds just the right amount of relief to the wrist without substantially increasing the girth of the handguardSmall profile is just enough to get repeatable hand position on weapon forendTextured in front and back for positive engagementMade in the U.S.A. from high quality, impact resistant polymers.

BCMGUNFIGHTER™ MCMR-SM Quick Detachable Sling Mount, (M-LOK® Compatible*) Low-Profile for increased mobility and decreased "snag" factorCompatible with M-LOK mounting systemFits standard push button, quick detach sling swivel (not included)8-position (360°), non-rotational locking interfaceAll steel constructionQuick detach sling swivel not included. 

BCM PNT Trigger Assembly (Polished - Nickel - Teflon)BCM quality, modern manufacturing processes, and aerospace coatings are combined to ensure parts last a lifetime while performing far beyond requirements established nearly six decades ago.The BCM PNT Trigger and PNT Hammer are a precision machined Mil-Spec AISI8620 investment casting per the USGI TDP (Mil-Spec) for M16/M4 family of weapons. (not to be confused with MIM parts that are very common in the commercial market). 156/157 holes are honed to assist in perfect alignment and a smooth trigger pull.After that, the BCM PNT Trigger and PNT Hammer then goes through a 3 step heat treat and case hardening process for optimal grain structure alignment, yielding a stronger and more wear resistance product. PolishedThe sear engagement surfaces are ground, but then hand polished for an increased smoothness and reduction in friction up to 300% beyond the Mil-Spec. NickelAn electroless nickel finish is applied for a smoother trigger pull with less "grit" and reduced felt "creep". Nickel also provides a long lasting finish that will not corrode, rust, or discolor due to oxidation. TeflonTeflon particles are embedded in the nickel, further reducing the friction of the interface and ensuring a long lasting coating. This is done on both the BCM PNT Trigger and Hammer in order to provide the maximum benefit allowed by the nickel coating, by augmenting the low friction and corrosion resistance. This assembly includes our impact resistant trigger and hammer pins. They are centerless ground to a fine finish and superior tolerances to ensure compatibility with all MIL SPEC lower receivers built per the USGI TDP.The BCM Disconnector is stamped from a 1070 material and fine blanked for cleaner edges, double disc ground to precise size. All hammer engagement surfaces are also ground for a super clean reset. The processes and tolerances are matched in the BCM PNT Trigger Assembly to create a system better than the sum of its parts.As with all BCM products, Made in the USA. 

BCM® Receiver End Plate with socket for Quick Disconnect (QD) swivel.Machined from steel, and easily accommodates staking.Like all BCM products, Made with pride in the U.S.A.

BCMGUNFIGHTER™ Quick Detach Sling Swivel(Heavy Duty Design) - Flush Plunger to Prevent Accidental Release- Tumble Deburred and Sand Blasted Before Plating- Carbon Steel with Manganese Phosphate Finish- For 1-1/4" Slings As with all BCM Professional Grade Weaponry®, Made in the U.S.A

BCM®™ Quick Detach Sling Swivel 1” D-Ring(Heavy Duty Design for 1” slings)- Contoured Design For Easy One Handed Operation- Tumble Deburred and Sand Blasted Before Plating- Carbon Steel with Manganese Phosphate Finish- For 1” SlingsAs with all BCM® Life Saving Tools®, Made in the U.S.A. 

Bravo Company introduces the BCM® Stock Assembly - Mod 0 - SOPMOD (Widebody).The strongest light-weight polymer stock available for your mil-spec receiver extension is here!More pronounced cheekweld (SOPMOD type)Snag free Design. No sharp edges prevent tangling of the rifle with the shooter's sling, molle gear, or other kit.Modular VBOST (Vehicle Borne Operations Sling Tab) This tab interfaces with the shooter's riggers' band or bungee to secure the shooter's sling against the stock when the carbine is not in use. Increasingly, this is the most common application when operating inside a vehicle.2 different types of ambidextrous sling mounting options, including QD swivel sockets.Simple modular design. 6 parts, and 1 screw allow for modular adaption of future stock options and configurations. 

BCM Vertical Grip Mod 3 (M-LOK Compatible)Direct Attach VersionLow-profile length for increased mobility and decreased snag factor.The forward angle increases the rigidity of the forearm, while providing a more natural wrist angle.Can be mounted in reverse angle to increase control when grabbing handguard and grip.Flat sides with aggressive texture give better yaw control to the shooter during firing and non-firing manipulations.A lightweight design at 1.9 ounces.Made in the U.S.A., manufactured from high quality, impact resistant polymers. 

BCM®™ Vertical Grip Mod 3 (M-LOK® Compatible*)Direct Attach VersionLow-profile length for increased mobility and decreased snag factor.The forward angle increases the rigidity of the forearm, while providing a more natural wrist angle.Can be mounted in reverse angle to increase control when grabbing handguard and grip.Flat sides with aggressive texture give better yaw control to the shooter during firing and non-firing manipulations.A lightweight design at 1.9 ounces.Made in the U.S.A., manufactured from high quality, impact resistant polymers.

BCM®™ VG-1913-Mod-3 The new (United States Patent 9,709,358) BCM® Direct Mount Picatinny 1913 interface system, was developed to be the most rigid, light-weight, and cost effective system available for Vertical Pistol Grips and Hand Stop type accessories.Most of the industry relies on a simple screw and backing nut for a mounting system. BCM has developed a patent pending anchor system that not only secures to the mounting surface, but spreads the energy and force throughout the accessory. Conventional mounting systems can allow for an increased amount of shifting and flexing of the accessory. The BCM direct mount interface system reduces those issues and offers a more secure lockup, eliminating play in the mounting surface. Direct Attach Picatinny 1913 Rail VersionLow-profile length for increased mobility and decreased "snag" factor.The forward angle increases the rigidity of the forearm, while providing a more natural wrist angle.Can be mounted in reverse angle to increase control when grabbing handguard and grip.Flat sides with aggressive texture give better yaw control to the shooter during firing and non-firing manipulations.Anchor and bolt system offers a simple robust design, while maintaining a lightweight 1.9 ounces. United States Patent 9,709,358Made in the U.S.A., manufactured from high quality, impact resistant polymers. Tools needed: T15 Torx Driver (not supplied)Insert tool (T15 Torx™ driver) into the screw from under the BCM 1913 Vertical GripPush tool into the screw to extend the Picatinny anchor, making it protrude from the top.With the Picatinny anchor protruding, slide the BCM Vertical Grip onto the Picatinny rail until positioned in the desired location. Grip can be installed in your desired orientation, angled forward or back.Push the BCM Vertical Grip against rail, engaging the BCM Vertical Grip's recoil lug to the intersecting Picatinny rail grooves.With the recoil lugs engaged, tighten the screw to snug the anchor (approximately 18-20 Inch-lbs. plus quarter turn).Ensure there is no wiggle or forward/backward movement once tight.*Blue thread locker may be used on threaded fasteners

BCM®™ VG-1913-Mod-3 The new Patent Pending BCM® Direct Mount Picatinny 1913 interface system, was developed to be the most rigid, light-weight, and cost effective system available for Vertical Pistol Grips and Hand Stop type accessories.Most of the industry relies on a simple screw and backing nut for a mounting system. BCM has developed a patent pending anchor system that not only secures to the mounting surface, but spreads the energy and force throughout the accessory. Conventional mounting systems can allow for an increased amount of shifting and flexing of the accessory. The BCM direct mount interface system reduces those issues and offers a more secure lockup, eliminating play in the mounting surface. Direct Attach Picatinny 1913 Rail VersionLow-profile length for increased mobility and decreased snag factor.The forward angle increases the rigidity of the forearm, while providing a more natural wrist angle.Can be mounted in reverse angle to increase control when grabbing handguard and grip.Flat sides with aggressive texture give better yaw control to the shooter during firing and non-firing manipulations.Anchor and bolt system offers a simple robust design, while maintaining a lightweight 1.9 ounces.Made in the U.S.A., manufactured from high quality, impact resistant polymers. Tools needed: T15 Torx Driver (not supplied)Insert tool (T15 Torx driver) into the screw from under the BCM 1913 Vertical GripPush tool into the screw to extend the Picatinny anchor, making it protrude from the top.With the Picatinny anchor protruding, slide the BCM Vertical Grip onto the Picatinny rail until positioned in the desired location. Grip can be installed in your desired orientation, angled forward or back.Push the BCM Vertical Grip against rail, engaging the BCM Vertical Grip's recoil lug to the intersecting Picatinny rail grooves.With the recoil lugs engaged, tighten the screw to snug the anchor (approximately 18-20 Inch-lbs. plus quarter turn).Ensure there is no wiggle or forward/backward movement once tight.*Blue thread locker may be used on threaded fasteners

BLUE FORCE VICKERS ONE SLING MULTICAM