ACCU-TAC FC-5 ARCA SPEC BIPOD The Accu-Tac FC-5 G2: Arca Spec QD Bipod was designed, engineered, and manufactured in the USA. This F-Class bipod is perfect for long-range, target, competition, and airgun shooting. The wide, lowered center allows the rifle to sit between the legs which supports accuracy and helps reduce movement from recoil. This is only a suggested use, this model is not exclusive for these applications.  The FC-5 G2 is 100% billet, made from the highest quality aircraft aluminum available. This model has the versatility you want in a bipod with its 4 individual leg positions and 9 notch height options. It also has the ability to pan as well as cant, which can each be locked and secured individually with the adjustable lever. The rail mount is simple, quick, and very secure, it attaches to a standard Arca Swiss or Arca style rail, and mounts in seconds without the need to use extra tools for tightening.

ACCU-WASHER MUZZLE ALIGNMENT SYSTEM 1/2X28 THREAD Simply choose the correct size Accu-Washer® shim to accurately index your muzzle brake or flash suppressor while maintaining perfect bore alignment. Since only one shim is required, the tolerance stackups and complexities associated with peel washers and other multi-shim systems are eliminated. This minimizes the risk of baffle strikes, ensuring maximum accuracy and safety from your muzzle brake or suppressor. Includes 18 individually marked Accu-Washer™ shims (timing adjustable from 0-360 degrees in 20-deg increments) and easy to follow instructions. Precision machined from high strength 400 series stainless steel to a guaranteed thickness uniformity of ±0.0001". All shims feature an oxide blasted non-reflective surface finish for low visibility. One Accu-Washer System will align approximately nine brakes (on average) before replenishment shims are needed. Designed to fit 1/2-28 or 5/8-24 threaded barrels.

ACCU-WASHER MUZZLE ALIGNMENT SYSTEM 5/8X24 THREAD Simply choose the correct size Accu-Washer® shim to accurately index your muzzle brake or flash suppressor while maintaining perfect bore alignment. Since only one shim is required, the tolerance stackups and complexities associated with peel washers and other multi-shim systems are eliminated. This minimizes the risk of baffle strikes, ensuring maximum accuracy and safety from your muzzle brake or suppressor. Includes 18 individually marked Accu-Washer™ shims (timing adjustable from 0-360 degrees in 20-deg increments) and easy to follow instructions. Precision machined from high strength 400 series stainless steel to a guaranteed thickness uniformity of ±0.0001". All shims feature an oxide blasted non-reflective surface finish for low visibility. One Accu-Washer System will align approximately nine brakes (on average) before replenishment shims are needed. Designed to fit 1/2-28 or 5/8-24 threaded barrels.

The Gamma 556SL is the perfect muzzle device for your pinned and welded builds.  The Gamma 556SL is long enough to provide an overall length of 16" when permanently affixed to the barrel. Its outside diameter of .745 inches allows you to install and service your gas system without removing the muzzle brake. The 3-chamber design looks great on any standard profile barrel while effectively eliminating recoil leaving your rifle shooting flat and soft.

The BCM®™'s Grip (GFG) featuresReduced angle for improved ergonomics and trigger controlHinged trap door offering storage inside the grip with a water resistant rubber gasketEach grip features an extended forward tang to close the gap between the trigger guard and pistol grip, and a high rise "beavertail" style back strap.Up to a quarter of an inch wider than the BCM® Mod 0 and Mod 1 grips.Made in the USA and manufactured from high quality impact resistant polymers.Each grip test fit to ensure proper function (may display attributes consistent with this QC process) 

Kinesthetic Angled Grip - KAGThe KAG is the end result of collaboration between BCM® and Travis Haley, founder of Haley Strategic Partners and inventor of multiple weapons manipulation enhancements in the firearms industry.Designed to complement modern shooting grips, the Kinesthetic Angled Grip (KAG) uses a biomechanically efficient forward rake to create an interface for positive retention and joint relief to the wrist, elbow, and shoulder, allowing for smooth weapon manipulation without substantial increase to the girth of the weapon system. Textured on both front and back, the profile of the KAG creates a channel for consistent and positive engagement which translates directly into improved efficiency in weapons manipulation and target to target transitions. Forward rake gives positive retention when using "C-clamp" (thumb over bore) method of handguard supportWorks as a rest for supported firing positionsSlight angle without significant bulk adds just the right amount of relief to the wrist without substantially increasing the girth of the handguardSmall profile is just enough to get repeatable hand position on weapon forendTextured in front and back for positive engagementMade in the U.S.A. from high quality, impact resistant polymers. 

KAG-MCMR (M-LOK® Compatible*)Kinesthetic Angled Grip - KAGThe KAG is the end result of collaboration between BCM® and Travis Haley, founder of Haley Strategic Partners and inventor of multiple weapons manipulation enhancements in the firearms industry.Designed to complement modern shooting grips, the Kinesthetic Angled Grip (KAG) uses a biomechanically efficient forward rake to create an interface for positive retention and joint relief to the wrist, elbow, and shoulder, allowing for smooth weapon manipulation without substantial increase to the girth of the weapon system. Textured on both front and back, the profile of the KAG creates a channel for consistent and positive engagement which translates directly into improved efficiency in weapons manipulation and target to target transitions. Forward rake gives positive retention when using "C-clamp" (thumb over bore) method of handguard supportWorks as a rest for supported firing positionsSlight angle without significant bulk adds just the right amount of relief to the wrist without substantially increasing the girth of the handguardSmall profile is just enough to get repeatable hand position on weapon forendTextured in front and back for positive engagementMade in the U.S.A. from high quality, impact resistant polymers.

BCMGUNFIGHTER™ MCMR-SM Quick Detachable Sling Mount, (M-LOK® Compatible*) Low-Profile for increased mobility and decreased "snag" factorCompatible with M-LOK mounting systemFits standard push button, quick detach sling swivel (not included)8-position (360°), non-rotational locking interfaceAll steel constructionQuick detach sling swivel not included. 

BCM® Receiver End Plate with socket for Quick Disconnect (QD) swivel.Machined from steel, and easily accommodates staking.Like all BCM products, Made with pride in the U.S.A.

BCMGUNFIGHTER™ Quick Detach Sling Swivel(Heavy Duty Design) - Flush Plunger to Prevent Accidental Release- Tumble Deburred and Sand Blasted Before Plating- Carbon Steel with Manganese Phosphate Finish- For 1-1/4" Slings As with all BCM Professional Grade Weaponry®, Made in the U.S.A

BCM®™ Quick Detach Sling Swivel 1” D-Ring(Heavy Duty Design for 1” slings)- Contoured Design For Easy One Handed Operation- Tumble Deburred and Sand Blasted Before Plating- Carbon Steel with Manganese Phosphate Finish- For 1” SlingsAs with all BCM® Life Saving Tools®, Made in the U.S.A. 

Bravo Company introduces the BCM® Stock Assembly - Mod 0 - SOPMOD (Widebody).The strongest light-weight polymer stock available for your mil-spec receiver extension is here!More pronounced cheekweld (SOPMOD type)Snag free Design. No sharp edges prevent tangling of the rifle with the shooter's sling, molle gear, or other kit.Modular VBOST (Vehicle Borne Operations Sling Tab) This tab interfaces with the shooter's riggers' band or bungee to secure the shooter's sling against the stock when the carbine is not in use. Increasingly, this is the most common application when operating inside a vehicle.2 different types of ambidextrous sling mounting options, including QD swivel sockets.Simple modular design. 6 parts, and 1 screw allow for modular adaption of future stock options and configurations.

BCM®™ Vertical Grip Mod 3 (M-LOK® Compatible*)Direct Attach VersionLow-profile length for increased mobility and decreased snag factor.The forward angle increases the rigidity of the forearm, while providing a more natural wrist angle.Can be mounted in reverse angle to increase control when grabbing handguard and grip.Flat sides with aggressive texture give better yaw control to the shooter during firing and non-firing manipulations.A lightweight design at 1.9 ounces.Made in the U.S.A., manufactured from high quality, impact resistant polymers. 

BCM®™ Vertical Grip Mod 3 (M-LOK® Compatible*)Direct Attach VersionLow-profile length for increased mobility and decreased snag factor.The forward angle increases the rigidity of the forearm, while providing a more natural wrist angle.Can be mounted in reverse angle to increase control when grabbing handguard and grip.Flat sides with aggressive texture give better yaw control to the shooter during firing and non-firing manipulations.A lightweight design at 1.9 ounces.Made in the U.S.A., manufactured from high quality, impact resistant polymers.

BCM®™ VG-1913-Mod-3 The new (United States Patent 9,709,358) BCM® Direct Mount Picatinny 1913 interface system, was developed to be the most rigid, light-weight, and cost effective system available for Vertical Pistol Grips and Hand Stop type accessories.Most of the industry relies on a simple screw and backing nut for a mounting system. BCM has developed a patent pending anchor system that not only secures to the mounting surface, but spreads the energy and force throughout the accessory. Conventional mounting systems can allow for an increased amount of shifting and flexing of the accessory. The BCM direct mount interface system reduces those issues and offers a more secure lockup, eliminating play in the mounting surface. Direct Attach Picatinny 1913 Rail VersionLow-profile length for increased mobility and decreased "snag" factor.The forward angle increases the rigidity of the forearm, while providing a more natural wrist angle.Can be mounted in reverse angle to increase control when grabbing handguard and grip.Flat sides with aggressive texture give better yaw control to the shooter during firing and non-firing manipulations.Anchor and bolt system offers a simple robust design, while maintaining a lightweight 1.9 ounces. United States Patent 9,709,358Made in the U.S.A., manufactured from high quality, impact resistant polymers. Tools needed: T15 Torx Driver (not supplied)Insert tool (T15 Torx™ driver) into the screw from under the BCM 1913 Vertical GripPush tool into the screw to extend the Picatinny anchor, making it protrude from the top.With the Picatinny anchor protruding, slide the BCM Vertical Grip onto the Picatinny rail until positioned in the desired location. Grip can be installed in your desired orientation, angled forward or back.Push the BCM Vertical Grip against rail, engaging the BCM Vertical Grip's recoil lug to the intersecting Picatinny rail grooves.With the recoil lugs engaged, tighten the screw to snug the anchor (approximately 18-20 Inch-lbs. plus quarter turn).Ensure there is no wiggle or forward/backward movement once tight.*Blue thread locker may be used on threaded fasteners

BCM®™ VG-1913-Mod-3 The new Patent Pending BCM® Direct Mount Picatinny 1913 interface system, was developed to be the most rigid, light-weight, and cost effective system available for Vertical Pistol Grips and Hand Stop type accessories.Most of the industry relies on a simple screw and backing nut for a mounting system. BCM has developed a patent pending anchor system that not only secures to the mounting surface, but spreads the energy and force throughout the accessory. Conventional mounting systems can allow for an increased amount of shifting and flexing of the accessory. The BCM direct mount interface system reduces those issues and offers a more secure lockup, eliminating play in the mounting surface. Direct Attach Picatinny 1913 Rail VersionLow-profile length for increased mobility and decreased snag factor.The forward angle increases the rigidity of the forearm, while providing a more natural wrist angle.Can be mounted in reverse angle to increase control when grabbing handguard and grip.Flat sides with aggressive texture give better yaw control to the shooter during firing and non-firing manipulations.Anchor and bolt system offers a simple robust design, while maintaining a lightweight 1.9 ounces.Made in the U.S.A., manufactured from high quality, impact resistant polymers. Tools needed: T15 Torx Driver (not supplied)Insert tool (T15 Torx driver) into the screw from under the BCM 1913 Vertical GripPush tool into the screw to extend the Picatinny anchor, making it protrude from the top.With the Picatinny anchor protruding, slide the BCM Vertical Grip onto the Picatinny rail until positioned in the desired location. Grip can be installed in your desired orientation, angled forward or back.Push the BCM Vertical Grip against rail, engaging the BCM Vertical Grip's recoil lug to the intersecting Picatinny rail grooves.With the recoil lugs engaged, tighten the screw to snug the anchor (approximately 18-20 Inch-lbs. plus quarter turn).Ensure there is no wiggle or forward/backward movement once tight.*Blue thread locker may be used on threaded fasteners

BLUE FORCE VICKERS ONE SLING COYOTE

BLUE FORCE VICKERS ONE SLING MULTICAM

BREEK ARMS WARHAMMER MOD2 AR-10 / LR308 CHARGING HANDLE AMBI The Breek Arms WARHAMMER Mod2 ambi charging handle is a simple and affordable upgrade that will substantially increase the use of your AR-15. Easily grab on either side of the handle and you can quickly charge your rifle even with large gloves with the textured grooves that are cut into the latch handles. The wide set-back latches work great for large optics. The low profile design keeps it slim and sleek looking without sacrificing functionality. Made entirely out of 7075 aluminum for added strength and durability!The new MOD2 design features improvements for further reducing gas blowback in the shooter's face. The relief cuts on the top and bottom of the stem are designed to help direct extra gas out the side and away from your face. And for any gas that does manage to go straight back, we increased the height of the shelf to better cover the back of the upper. These modifications help improve the shooting experience, especially when shooting suppressed!

BREEK ARMS WARHAMMER MOD2 FDE AR-15 CHARGE HANDLE AMBI The Breek Arms WARHAMMER Mod2 ambi charging handle is a simple and affordable upgrade that will substantially increase the use of your AR-15. Easily grab on either side of the handle and you can quickly charge your rifle even with large gloves with the textured grooves that are cut into the latch handles. The wide set-back latches work great for large optics. The low profile design keeps it slim and sleek looking without sacrificing functionality. Made entirely out of 7075 aluminum for added strength and durability!The new MOD2 design features improvements for further reducing gas blowback in the shooter's face. The relief cuts on the top and bottom of the stem are designed to help direct extra gas out the side and away from your face. And for any gas that does manage to go straight back, we increased the height of the shelf to better cover the back of the upper. These modifications help improve the shooting experience, especially when shooting suppressed! 

BREEK ARMS WARHAMMER MOD2 MICRO LATCH AR-15 CHARGING HANDLE AMBI The Breek Arms WARHAMMER Mod2 ambi charging handle is a simple and affordable upgrade that will substantially increase the use of your AR-15. Easily grab on either side of the handle and you can quickly charge your rifle even with large gloves with the textured grooves that are cut into the latch handles. The wide set-back latches work great for large optics. The low profile design keeps it slim and sleek looking without sacrificing functionality. Made entirely out of 7075 aluminum for added strength and durability!The new MOD2 design features improvements for further reducing gas blowback in the shooter's face. The relief cuts on the top and bottom of the stem are designed to help direct extra gas out the side and away from your face. And for any gas that does manage to go straight back, we increased the height of the shelf to better cover the back of the upper. These modifications help improve the shooting experience, especially when shooting suppressed! 

BREEK ARMS WARHAMMER MOD2 MICRO LATCH AR-15 CHARGING HANDLE AMBI The Breek Arms WARHAMMER Mod2 ambi charging handle is a simple and affordable upgrade that will substantially increase the use of your AR-15. Easily grab on either side of the handle and you can quickly charge your rifle even with large gloves with the textured grooves that are cut into the latch handles. The wide set-back latches work great for large optics. The low profile design keeps it slim and sleek looking without sacrificing functionality. Made entirely out of 7075 aluminum for added strength and durability!The new MOD2 design features improvements for further reducing gas blowback in the shooter's face. The relief cuts on the top and bottom of the stem are designed to help direct extra gas out the side and away from your face. And for any gas that does manage to go straight back, we increased the height of the shelf to better cover the back of the upper. These modifications help improve the shooting experience, especially when shooting suppressed!

DURAMAG 10RD 6.5 GRENDL SS BLK

EFAB 5.56 HYBRID MUZZLE BRAKE & FLASH SUPPRESSOR Combines superior muzzle control with effective flash suppression even on barrels as short as 10 inches. Patented EFAB technology uses an innovative configuration of diverging expansion nozzles to both diffuse and cool combustion gases resulting in maximum recoil reduction with minimum concussion to the rear and sides of the shooter. Closed bottom reduces dust signature when shooting prone. Precision machined from heat treated 416 stainless steel with an advanced Ionbond® high temperature CrCN coating for extreme durability. Features pilot hole for permanent pinning to bring 14.5" barrels to legal length.

EFAB 7.62 HYBRID MUZZLE BRAKE & FLASH SUPPRESSOR Combines superior muzzle control with effective flash suppression even on barrels as short as 10 inches. Patented EFAB technology uses an innovative configuration of diverging expansion nozzles to both diffuse and cool combustion gases resulting in maximum recoil reduction with minimum concussion to the rear and sides of the shooter. Closed bottom reduces dust signature when shooting prone. Precision machined from heat treated 416 stainless steel with an advanced Ionbond® high temperature CrCN coating for extreme durability. Features pilot hole for permanent pinning to bring 14.5" barrels to legal length.