ACCU-WASHER MUZZLE ALIGNMENT SYSTEM 1/2X28 THREAD Simply choose the correct size Accu-Washer® shim to accurately index your muzzle brake or flash suppressor while maintaining perfect bore alignment. Since only one shim is required, the tolerance stackups and complexities associated with peel washers and other multi-shim systems are eliminated. This minimizes the risk of baffle strikes, ensuring maximum accuracy and safety from your muzzle brake or suppressor. Includes 18 individually marked Accu-Washer™ shims (timing adjustable from 0-360 degrees in 20-deg increments) and easy to follow instructions. Precision machined from high strength 400 series stainless steel to a guaranteed thickness uniformity of ±0.0001". All shims feature an oxide blasted non-reflective surface finish for low visibility. One Accu-Washer System will align approximately nine brakes (on average) before replenishment shims are needed. Designed to fit 1/2-28 or 5/8-24 threaded barrels.

ACCU-WASHER MUZZLE ALIGNMENT SYSTEM 5/8X24 THREAD Simply choose the correct size Accu-Washer® shim to accurately index your muzzle brake or flash suppressor while maintaining perfect bore alignment. Since only one shim is required, the tolerance stackups and complexities associated with peel washers and other multi-shim systems are eliminated. This minimizes the risk of baffle strikes, ensuring maximum accuracy and safety from your muzzle brake or suppressor. Includes 18 individually marked Accu-Washer™ shims (timing adjustable from 0-360 degrees in 20-deg increments) and easy to follow instructions. Precision machined from high strength 400 series stainless steel to a guaranteed thickness uniformity of ±0.0001". All shims feature an oxide blasted non-reflective surface finish for low visibility. One Accu-Washer System will align approximately nine brakes (on average) before replenishment shims are needed. Designed to fit 1/2-28 or 5/8-24 threaded barrels.

The Gamma 556SL is the perfect muzzle device for your pinned and welded builds.  The Gamma 556SL is long enough to provide an overall length of 16" when permanently affixed to the barrel. Its outside diameter of .745 inches allows you to install and service your gas system without removing the muzzle brake. The 3-chamber design looks great on any standard profile barrel while effectively eliminating recoil leaving your rifle shooting flat and soft.

EFAB 5.56 HYBRID MUZZLE BRAKE & FLASH SUPPRESSOR Combines superior muzzle control with effective flash suppression even on barrels as short as 10 inches. Patented EFAB technology uses an innovative configuration of diverging expansion nozzles to both diffuse and cool combustion gases resulting in maximum recoil reduction with minimum concussion to the rear and sides of the shooter. Closed bottom reduces dust signature when shooting prone. Precision machined from heat treated 416 stainless steel with an advanced Ionbond® high temperature CrCN coating for extreme durability. Features pilot hole for permanent pinning to bring 14.5" barrels to legal length.

EFAB 7.62 HYBRID MUZZLE BRAKE & FLASH SUPPRESSOR Combines superior muzzle control with effective flash suppression even on barrels as short as 10 inches. Patented EFAB technology uses an innovative configuration of diverging expansion nozzles to both diffuse and cool combustion gases resulting in maximum recoil reduction with minimum concussion to the rear and sides of the shooter. Closed bottom reduces dust signature when shooting prone. Precision machined from heat treated 416 stainless steel with an advanced Ionbond® high temperature CrCN coating for extreme durability. Features pilot hole for permanent pinning to bring 14.5" barrels to legal length.

HYPERTAP 11.6MM/.450 5/8 X 24 MATTE BLACK STANDARD BODY Developed from the ground up and backed by knowledge gained from years of pushing the edge of muzzle device performance, the Hypertap muzzle brake delivers more than we’ve ever offered before. Our proprietary Hybrid Baffle Design combined with advanced Convergent-Divergent port geometry yields an unprecedented recoil reduction of over 84%*, nearly 10% higher than our M4-72, while maintaining modest 35-degree baffle angles and generous bore clearance. This results in exceptional safety, less gas blowback, better accuracy, and higher overall shooter comfort than any other device in its class. Fully tunable gas biasing allows the shooter to further reduce, or even eliminate, sight picture movement while firing. An integral universal timing nut eliminates the need for shims and allows quick field installation & removal using an adjustable wrench or the lightweight spanner tools (included). Additional features include: zero flash increase, compact lightweight design, a rugged skeletonized crown, cleaning friendly design, heat-treated stainless steel construction, a tough Ionbond® CrCN finish for superior durability and, as always, 100% Made in the USA.  

HYPERTAP MUZZLE BRAKE 5.56MM/.223 CAL 1/2X28 BLACK Developed from the ground up and backed by knowledge gained from years of pushing the edge of muzzle device performance, the Hypertap muzzle brake delivers more than we’ve ever offered before. Our proprietary Hybrid Baffle Design combined with advanced Convergent-Divergent port geometry yields an unprecedented recoil reduction of over 84%*, nearly 10% higher than our M4-72, while maintaining modest 35-degree baffle angles and generous bore clearance. This results in exceptional safety, less gas blowback, better accuracy, and higher overall shooter comfort than any other device in its class. Fully tunable gas biasing allows the shooter to further reduce, or even eliminate, sight picture movement while firing. An integral universal timing nut eliminates the need for shims and allows quick field installation & removal using an adjustable wrench or the lightweight spanner tools (included). Additional features include: zero flash increase, compact lightweight design, a rugged skeletonized crown, cleaning friendly design, heat-treated stainless steel construction, a tough Ionbond® CrCN finish for superior durability and, as always, 100% Made in the USA.

HYPERTAP MUZZLE BRAKE 5.56MM/.223CAL 1/2X28 STAINLESS Developed from the ground up and backed by knowledge gained from years of pushing the edge of muzzle device performance, the Hypertap muzzle brake delivers more than we’ve ever offered before. Our proprietary Hybrid Baffle Design combined with advanced Convergent-Divergent port geometry yields an unprecedented recoil reduction of over 84%*, nearly 10% higher than our M4-72, while maintaining modest 35-degree baffle angles and generous bore clearance. This results in exceptional safety, less gas blowback, better accuracy, and higher overall shooter comfort than any other device in its class. Fully tunable gas biasing allows the shooter to further reduce, or even eliminate, sight picture movement while firing. An integral universal timing nut eliminates the need for shims and allows quick field installation & removal using an adjustable wrench or the lightweight spanner tools (included). Additional features include: zero flash increase, compact lightweight design, a rugged skeletonized crown, cleaning friendly design, heat-treated stainless steel construction, a tough Ionbond® CrCN finish for superior durability and, as always, 100% Made in the USA.

HYPERTAP MUZZLE BRAKE 6.5MM/.264CAL 5/8X24 BLACK Developed from the ground up and backed by knowledge gained from years of pushing the edge of muzzle device performance, the Hypertap muzzle brake delivers more than we’ve ever offered before. Our proprietary Hybrid Baffle Design combined with advanced Convergent-Divergent port geometry yields an unprecedented recoil reduction of over 84%*, nearly 10% higher than our M4-72, while maintaining modest 35-degree baffle angles and generous bore clearance. This results in exceptional safety, less gas blowback, better accuracy, and higher overall shooter comfort than any other device in its class. Fully tunable gas biasing allows the shooter to further reduce, or even eliminate, sight picture movement while firing. An integral universal timing nut eliminates the need for shims and allows quick field installation & removal using an adjustable wrench or the lightweight spanner tools (included). Additional features include: zero flash increase, compact lightweight design, a rugged skeletonized crown, cleaning friendly design, heat-treated stainless steel construction, a tough Ionbond® CrCN finish for superior durability and, as always, 100% Made in the USA.

HYPERTAP MUZZLE BRAKE 6.5MM/.264CAL SLIM 5/8X24 BLACK Developed from the ground up and backed by knowledge gained from years of pushing the edge of muzzle device performance, the Hypertap muzzle brake delivers more than we’ve ever offered before. Our proprietary Hybrid Baffle Design combined with advanced Convergent-Divergent port geometry yields an unprecedented recoil reduction of over 84%*, nearly 10% higher than our M4-72, while maintaining modest 35-degree baffle angles and generous bore clearance. This results in exceptional safety, less gas blowback, better accuracy, and higher overall shooter comfort than any other device in its class. Fully tunable gas biasing allows the shooter to further reduce, or even eliminate, sight picture movement while firing. An integral universal timing nut eliminates the need for shims and allows quick field installation & removal using an adjustable wrench or the lightweight spanner tools (included). Additional features include: zero flash increase, compact lightweight design, a rugged skeletonized crown, cleaning friendly design, heat-treated stainless steel construction, a tough Ionbond® CrCN finish for superior durability and, as always, 100% Made in the USA.

HYPERTAP MUZZLE BRAKE 7.62MM/.308CAL 5/8X24 BLACK Developed from the ground up and backed by knowledge gained from years of pushing the edge of muzzle device performance, the Hypertap muzzle brake delivers more than we’ve ever offered before. Our proprietary Hybrid Baffle Design combined with advanced Convergent-Divergent port geometry yields an unprecedented recoil reduction of over 84%*, nearly 10% higher than our M4-72, while maintaining modest 35-degree baffle angles and generous bore clearance. This results in exceptional safety, less gas blowback, better accuracy, and higher overall shooter comfort than any other device in its class. Fully tunable gas biasing allows the shooter to further reduce, or even eliminate, sight picture movement while firing. An integral universal timing nut eliminates the need for shims and allows quick field installation & removal using an adjustable wrench or the lightweight spanner tools (included). Additional features include: zero flash increase, compact lightweight design, a rugged skeletonized crown, cleaning friendly design, heat-treated stainless steel construction, a tough Ionbond® CrCN finish for superior durability and, as always, 100% Made in the USA.

HYPERTAP MUZZLE BRAKE 7.62MM/.308CAL 5/8X24 STAINLESS Developed from the ground up and backed by knowledge gained from years of pushing the edge of muzzle device performance, the Hypertap muzzle brake delivers more than we’ve ever offered before. Our proprietary Hybrid Baffle Design combined with advanced Convergent-Divergent port geometry yields an unprecedented recoil reduction of over 84%*, nearly 10% higher than our M4-72, while maintaining modest 35-degree baffle angles and generous bore clearance. This results in exceptional safety, less gas blowback, better accuracy, and higher overall shooter comfort than any other device in its class. Fully tunable gas biasing allows the shooter to further reduce, or even eliminate, sight picture movement while firing. An integral universal timing nut eliminates the need for shims and allows quick field installation & removal using an adjustable wrench or the lightweight spanner tools (included). Additional features include: zero flash increase, compact lightweight design, a rugged skeletonized crown, cleaning friendly design, heat-treated stainless steel construction, a tough Ionbond® CrCN finish for superior durability and, as always, 100% Made in the USA.

HYPERTAP MUZZLE BRAKE SLIM 9MM/.355CAL 1/2X28 BLACK Developed from the ground up and backed by knowledge gained from years of pushing the edge of muzzle device performance, the Hypertap muzzle brake delivers more than we’ve ever offered before. Our proprietary Hybrid Baffle Design combined with advanced Convergent-Divergent port geometry yields an unprecedented recoil reduction of over 84%*, nearly 10% higher than our M4-72, while maintaining modest 35-degree baffle angles and generous bore clearance. This results in exceptional safety, less gas blowback, better accuracy, and higher overall shooter comfort than any other device in its class. Fully tunable gas biasing allows the shooter to further reduce, or even eliminate, sight picture movement while firing. An integral universal timing nut eliminates the need for shims and allows quick field installation & removal using an adjustable wrench or the lightweight spanner tools (included). Additional features include: zero flash increase, compact lightweight design, a rugged skeletonized crown, cleaning friendly design, heat-treated stainless steel construction, a tough Ionbond® CrCN finish for superior durability and, as always, 100% Made in the USA.

M11 SEVER DUTY MUZZLE BRAKE 6.5MM/.264CAL DLC BLACK A massive symmetrical blast baffle, combined with two compensated front baffles, redirect gas to the sides and upward delivering unparalleled recoil reduction while also minimizing muzzle rise and ground disturbance. High tolerance class-3 threads machined in same operation as bore aperture ensures perfect concentricity; this combined with a progressively decreasing baffle thickness minimizes bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy. Computer FEA optimized for maximum strength to weight ratio and impact survivability. Precision CNC machined from high strength HTSR 400-series stainless steel bar for superior heat and corrosion resistance. Wrench flats on top and bottom for easy muzzle brake installation and removal. Available in either an ultra wear resistant DLC (Diamond-Like Carbon) matte black finish, or stainless steel in-the-white, matte finish.

M4 MUZZLE THREAD ADAPTOR 1/2X28-5/8X24 PVD MATTE BLACK Ideal for attaching our 5/8-24 threaded M11 and M41 Severe-Duty™ Muzzle Brakes to your 1/2-28 or 9/16-24 threaded barrel, as well as mounting suppressors and other alignment critical muzzle devices. Wrench flats on shoulder make installation and removal for use on multiple devices simple and easy. Both Internal and external threads are single point cut in same operation to tight UNEF Class-3 tolerances for perfect concentricity and alignment. Compact design moves muzzle device only .100” forward maintaining full thread joint strength. The M4 muzzle thread adapter is precision CNC machined from pre-hardened HTSR 400-series stainless steel bar for superior heat and corrosion resistance.

M4 MUZZLE THREAD ADAPTOR 9/16X24-5/8X24 MATTE STAINLESS Ideal for attaching our 5/8-24 threaded M11 and M41 Severe-Duty™ Muzzle Brakes to your 1/2-28 or 9/16-24 threaded barrel, as well as mounting suppressors and other alignment critical muzzle devices. Wrench flats on shoulder make installation and removal for use on multiple devices simple and easy. Both Internal and external threads are single point cut in same operation to tight UNEF Class-3 tolerances for perfect concentricity and alignment. Compact design moves muzzle device only .100” forward maintaining full thread joint strength. The M4 muzzle thread adapter is precision CNC machined from pre-hardened HTSR 400-series stainless steel bar for superior heat and corrosion resistance.

M4 MUZZLE THREAD ADAPTOR 9/16X24-5/8X24 PVD MATTE BLACK

M4 SHOULDERLESS THREAD ADAPTOR 1/2X28-5/8X24 MATTE STAINLESS

M4 SHOULDERLESS THREAD ADAPTOR 1/2X32-5/8X24 MATTE STAINLESS Simple shoulder-less design allows thread adapter to remain fully concealed under muzzle device for a continuous, streamline look. Muzzle device seats directly against barrel shoulder maintaining full thread joint strength and providing more accurate alignment to bore. Internal and external threads are single point cut in same operation to tight UNEF Class-3 tolerances for perfect concentricity and alignment. The M4 muzzle thread adapter is precision CNC machined from pre-hardened HTSR 400-series stainless steel bar for superior heat and corrosion resistance. Allows the attachment of 5/8-24 muzzle devices to a 1/2-28, 1/2-32, or 1/2-36 threaded barrel.

M4-72 SEVER DUTY COMPENSATOR 7.62MM/.308CAL BLACK Features an innovative reverse venting triple baffle design for the highest recoil reduction in its class. The M4-72 is an extremely lightweight (2.6 oz) and compact design that delivers industry leading recoil reduction of up to 75%. Closed bottom construction combined with upward biased venting effectively eliminates both muzzle rise and dust signature. Precision machined from heat treated stainless steel for superior durability, the M4-72 can withstand the extreme heat of combat conditions without being subject to rapid erosion. Available with an advanced Ionbond® high temperature CrCN coating (matte black), or stainless steel in-the-white (satin grey).

M4-72 SEVER DUTY COMPENSATOR 7.62MM/.308CAL STAINLESS Features an innovative reverse venting triple baffle design for the highest recoil reduction in its class. The M4-72 is an extremely lightweight (2.6 oz) and compact design that delivers industry leading recoil reduction of up to 75%. Closed bottom construction combined with upward biased venting effectively eliminates both muzzle rise and dust signature. Precision machined from heat treated stainless steel for superior durability, the M4-72 can withstand the extreme heat of combat conditions without being subject to rapid erosion. Available with an advanced Ionbond® high temperature CrCN coating (matte black), or stainless steel in-the-white (satin grey).

M41 SEVERE DUTY MUZZLE BRAKE 6.5MM/.264CAL DLC BLACK

M41 SEVERE DUTY MUZZLE BRAKE 7.62MM/.308CAL DLC BLACK Three large axisymmetric baffles, each featuring five helical ports, redirect a massive volume of gas away from the bore axis in a counter-clockwise radial direction. This not only provides maximum recoil reduction but also reduces the torsional recoil force associated with heavy bullets and fast twist rates. High tolerance class-3 threads machined in same operation as bore aperture ensures perfect concentricity; this combined with a progressively decreasing baffle thickness and maximized venting area significantly reduce bullet flight disturbance resulting in less yaw, higher BC, and improved accuracy. Computer FEA optimized for maximum strength to weight ratio and impact survivability. Precision CNC machined from high strength HTSR 400-series stainless steel bar for superior heat and corrosion resistance. Offered in either an ultra wear resistant DLC (Diamond-Like Carbon) matte black finish, or stainless steel in-the-white, matte finish.

PRECISION ARMAMENT DIRECT THREAD SUPPRESSOR MOUNT 5/8-24

PRECISION ARMAMENT HYPERTAP MUZZLE BRAKE 6MM/.243 CAL, 5/8-24