DURAMAG 10RD 6.5 GRENDL SS BLK

ETS AR MAGAZINE .223/5.56 30 RD Next-gen translucent polymer constructionStainless steel springPolymer anti-tilt followerRibbed design for a positive, non-slip gripEnlarged over-insertion tabImproved feed lip geometriesErgonomic floor plateClip-on dust coverTool-free disassembly

MAG SCORPION 3 PLUS 9MM 30RD

The PMAG 20 LR/SR GEN M3 is a lightweight, cost effective, highly reliable 20-round magazine for SR25/M110 pattern rifles chambered in 7.62x51 NATO (.308 Winchester).The GEN M3 PMAGs feature a long-life stainless steel spring, an anti-tilt, self-lubricating follower, and constant-curve internal geometry for reliable feeding. Low profile ribs and an aggressive front and rear texture give positive control of the GEN M3 in all environments, and a paint pen dot matrix at the bottom panel of the body to allow easy marking by the end user for identification. The easy-to-disassemble flared floorplate aids extraction and handling of the magazine while providing improved drop protection, and better compatibility with tight double and triple magazine pouches. Its simple, tool-less disassembly makes for easy cleaning and maintenance.Designed specifically for SAAMI-spec ammunition, the PMAG 20 LR/SR GEN M3 is less than half the weight of standard issue steel magazines and maintains a service life round count approximately equal to the rifle barrel itself.Made in the USA.Technical SpecificationsMore InformationCaliber 7.62x51mm / .308 WinchesterPlatform AR10, M110, SR25Capacity 20Weight 5.9 oz.Length, max 6.5 in.Compatibility Armalite AR-10A, Colt LE901-16S, CORE Rifle Systems CORE30, JP Enterprises LRP-07, KAC SR25, LaRue OBR, Les Baer .308, LMT .308 MWS, LWRCI REPR, Mega Arms MATEN, Noveske Gen III N6, POF P-308, Ruger SR-762, S&W M&P10, SIG716, and others*Other Specs Optimized for use with SAAMI-spec 7.62x51/.308 Winchester ammunition.*NOTE: Compatible with older model Bushmaster .308 ORC, Remington R-25, and DPMS LR308 rifles, but not optimized for bolt lock functionality with newer models based on the DPMS GII design. NOT compatible with Armalite AR-10B, Springfield Armory M1A, Rock River Arms LAR8, FN SCAR 17S, PTR-91, HK417 or any other rifles that utilize M14, FN FAL, or HK 91/G3 patterned magazines.

The next-generation PMAG 30 AR/M4 GEN M3 is a 30-round polymer magazine for AR15/M4 compatible weapons chambered in 5.56x45 NATO / .223 Remington. Along with expanded feature set and compatibility, the GEN M3 incorporates new material technology and manufacturing processes for enhanced strength, durability, and reliability that exceed rigorous military performance specifications.While the GEN M3 is optimized for Colt-spec AR15/M4 platforms, modified internal and external geometry also permits operation with a range of additional weapons, such as the HK® 416/MR556A1/M27 IAR, British SA-80, FN® SCAR™ MK 16/16S, and others.Similar to the MOE® PMAG, the GEN M3 features a long-life USGI-spec stainless steel spring for commonality, a four-way anti-tilt follower, constant-curve internal geometry for reliable feeding, and simple tool-less disassembly for easy cleaning.The PMAG 30 GEN M3 also includes a redesigned bolt catch notch in the rear of the magazine that provides increased bolt catch clearance, while an over-travel stop on the spine helps ensure the magazine will not over-insert on compatible weapons. Low profile ribs and new, aggressive front and rear texture give positive control of the GEN M3 in all environments, and a paint pen dot matrix has been added to the bottom panel of the body to allow easy marking for identification. The new, easy to disassemble flared floorplate aids extraction and handling of the magazine while providing improved drop protection, but is slightly slimmer than before for better compatibility with tight double and triple magazine pouches.Made in the U.S.A.30 ROUNDS IS THE STANDARD30-round reliability with no stoppagesEASY IDENTIFICATIONUse the paint pen dot matrix to easily identify your different loads when it's crunch timeADVANCED FOLLOWERThe anti-tilt, self-lubricating follower ensures a smooth feed and magazine reliabilitySLIMLINE FLOORPLATEImproved flared floorplate aids magazine handling and disassembly and is slim enough for use with many double and triple pouchesTechnical SpecificationsMore InformationCaliber 5.56x45mm / .223 RemingtonPlatform AR15, M4, M16, SA-80Capacity 30 rdsWeight 5 oz.Length, max 7.5 in.Compatibility Wide compatibility with most 'STANAG 4179' platforms such as the AR15, M4, M16, SCAR MK16/16S, HK416, MR556, M27 IAR, IWI Tavor, and others

The next-generation PMAG 30 GEN M3 Window is a 30-round 5.56x45 NATO (.223 Remington) polymer magazine for AR15/M4 compatible weapons that features transparent windows to allow rapid visual identification of approximate number of rounds remaining. Along with expanded feature set and compatibility, the GEN M3 Window incorporates new material technology and manufacturing processes for enhanced strength, durability, and reliability to exceed rigorous military performance specifications.While the GEN M3 is optimized for Colt-spec AR15/M4 platforms, modified internal and external geometry also permits operation with a range of additional weapons such as the HK® 416/MR556A1/M27 IAR, British SA-80, FN® SCAR MK 16/16S, and others.Similar to the MOE® PMAG, the GEN M3 Window features a long-life USGl-spec stainless steel spring, four-way anti-tilt follower and constant-curve internal geometry for reliable feeding, and simple tool-less disassembly to ease cleaning.In addition, a redesigned bolt catch notch in the rear of the magazine provides increased bolt catch clearance, while an over-travel stop on the spine helps ensure the magazine will not over-insert on compatible weapons. Low profile ribs and new aggressive front and rear texture gives positive control of the GEN M3 in all environments, and a paint pen dot matrix has been added to the bottom panel of the body to allow easy marking by the end user for identification.The new, easy to disassemble flared floorplate aids extraction and handling of the magazine while providing improved drop protection, but is slightly slimmer than before for better compatibility with tight double and triple magazine pouches.Durable dual-side transparent windows allow for quick determination of approximate number of rounds remaining in the magazine. Utilizing a high visibility indicator coil on the spring and numerical markers on the magazine body, the MagLevel® system provides positive verification without affecting the durability or reliability of the magazine.Made in the USA.NSN: MAG556-BLK 1005-01-615-5169THE 30-ROUND STANDARD30-round reliability and no stoppagesAnti-glare translucent MagLevel windows on both sides of the body along with a painted indicator on the spring allows for easy determination of rounds remaining from 1 to 30Next-generation impact and crush-resistant polymer constructionModified dimensions allow for wider compatibility with non Colt-spec 'STANAG 4179' platformsADVANCED FOLLOWER AND ENGINEERINGThe anti-tilt, self-lubricating follower ensures a smooth feed and magazine reliabilityConstant-curve internal geometry, over-travel insertion stop on the spine, and a long-life stainless steel spring ensure smooth feedingEASY IDENTIFICATIONPaint pen dot matrix panels on the bottom of the body to allow for identification markingIts ribbed gripping surface and aggressive front and rear texture provide positive magazine handlingSLIMLINE FLOORPLATEImproved slimmer floorplate aids magazine handling and disassembly and is slim enough for use with many double and triple pouchesTechnical SpecificationsMore InformationCaliber 5.56x45mm / .223 RemingtonPlatform AR15, M4, M16, SA-80Capacity 30 rdsWeight 5 oz.Length, max 7.5 in.Compatibility Wide compatibility with most 'STANAG 4179' platforms such as the AR15, M4, M16, SCAR MK16/16S, HK416, MR556, M27 IAR, IWI Tavor, and others

MAGPUL PMAG 5 AC 7.62X51 AICS 5RD BLK

Product detailsThese magazines are designed with a unique Double Stack to Single Feed (DSSF) transition design for reduced overall height compared to the industry standard.Available with or without the front binder plate. See details below for benefits and limitations of each version.DETAILSMDT AICS-pattern metal magazines are manufactured from high strength steel, nitrided, and finished inside and outside with Cerakote Elite for ultimate durability, corrosion resistance, and friction reduction.SPECIFICATIONS3.055” Outside Length2.870” max cartridge overall length (COAL) with binder plate2.960” max cartridge overall length (COAL) without binder plate (see limitations below)3.90” Rear HeightMDT 10-round magazines are approximately ¾” shorter in height than standard AICS 10-round magazines due to MDT’s unique Double Stack to Single Feed (DSSF) transition design, allowing easier mag changes when shooting prone.10-round magazine includes 2 internal ribs that help reduce friction between the cartridge and magazine body and provide a smooth transition from a double stack to single feed at the top of the magazine.COMPATIBILITYThese magazines will need to be slightly modified to function with Howa 1500 SA rifles.308WIN6mm Creedmoor243WIN260 Rem6.5 Creedmoor7mm-08 Win308/7.62x51 NATO22 - 250 Rem (will work at a reduced capacity)BINDER PLATE DETAILSThe magazines with front binder plates are compatible with all rifles equipped with AICS-pattern bottom metal or chassis systems. The binder plate holds the cartridges back from the front of the magazines and guides them past the bottom of the feed ramp. The maximum cartridge overall length (COAL) that will fit in this magazine is 2.870”.The magazines without front binder plates allow a maximum cartridge overall length of 2.960”. These are compatible with all AICS-pattern bottom metal and chassis systems, but most common actions such as Remington 700 and Savage 10/11 will require modifications to the receiver (i.e. notching out the bottom of the feed ramp) to prevent the bullet tips from catching on the bottom of the feed ramp (see photo below).

MEC-GAR MAGAZINE MAG COLT GOVT 45 BL 10RD

The M-LOK Extended Cantilever Scout Mount provides maximum forward light positioning to minimize shadowing effects and return usable handguard space to the user.The extended cantilever design is low profile and optimized for Magpul MOE SL, Zhukov, and MOE M-LOK Shotgun forends as well as compatible aluminum M-LOK handguards.Made in the USA. MADE FOR HARD USEMount machined from Mil-Spec anodized aluminumRecoil/impact mitigation lugsCammed T-NutsAttachment M-LOK SlotsOther Specs COMPATIBILITYFits SureFire® Scout Light®* and Streamlight® ProTac® Rail LightsDirectly mounts to M-LOK compatible systemsBackwards MOE® compatibility with optional adaptersExtra length reduces barrel shadowing and provides more handguard real estate*NOTE: NOT compatible with SureFire DS00 Dual Activation Switch or M600DF Scout Light.Due to wider ventilation slots, the Scout Mount will not properly fit Bushmaster ACR Hand Guards. *The MOE Scout Mount is optimized for rifles with a factory A2 front sight base. Rifles with a railed gas block and folding front sight may have clearance issues depending on the size/shape of the gas block, sight, and installed light.

The AK MagLink is a coupler for PMAG AK magazines designed for Kalashnikov pattern rifles in 7.62x39mm. It allows the user to attach two magazines together for more efficient speed reloads and to keep additional ammunition accessible on the weapon at all times.The AK MagLink features a two-piece bolt-on design and durable, lightweight reinforced polymer construction, which resists operational abuse. Wide-set design resists flexing and integral grooves interface with PMAG ribbing to eliminate slippage during transport or use.Made in the USA.FITS AK PMAGSThe MagLink fits 7.62x39 PMAG 30-round AK/AKM MOE® and GEN M3™ magazinesFAST AND EFFIECIENTThe AK MagLink allows the user more efficient speed reloads while keeping more ammunition at hand and ready to useSECURE DESIGNThe MagLink features a two-piece bolt-on design to keep your PMAGS in place, even during rigorous use. The wide-set, two-piece bolt-on design resists flexingSTRONG AND DURABLE CONSTRUCTIONMade of the same reinforced polymer as our indestructable PMAGSImpact-resistant polymer construction provides light weight and resists operational abuseIntegral grooves interface with PMAG ribbing to eliminate slippageTechnical SpecificationsMore InformationPlatform AK / AKMWeight 2.8 oz.Other Specs NOTE: Fits 7.62x39 PMAG 30-round AK/AKM MOE® and GEN M3™ magazines 

The MagLink is a coupler for PMAG 30 and 40 round AR/M4 magazines* which allows the user to attach two magazines together for more efficient speed reloads, and to keep additional ammunition accessible on the weapon at all times. The MagLink features a two-piece bolt-on design and durable, lightweight reinforced polymer construction.Made in the USA.NSN: MAG595-BLK 1005-01-616-4875FITS POPULAR PMAGSThe MagLink allows use with the 30 and 40 round PMAGS*FAST AND EFFICIENTThe MagLink allows efficient speed reloads while keeping more ammunition at hand and ready to useSECURE DESIGNThe MagLink features a two-piece bolt-on design to keep your PMAGS in place even during rigorous useSTRONG AND DURABLE CONSTRUCTIONJust like our indestructable PMAGS, the MagLink is made of the same reinforced polymer. If it's going to carry PMAGs, it has to perform like oneTechnical SpecificationsMore InformationPlatform AR15, M4, M16Weight 2.8 oz.Compatibility 5.56x45 PMAG 30 and 40 round AR/M4 GEN M2 MOE® and GEN M3™ magazines as well as PMAG 10/30 and PMAG 30 AR 300 B. NOT compatible with MAG1417 TMAG™, 10 or 20-round PMAGS, or AK/AKM, G36, AUG, and SR25/M110 PMAGS.

When installed on the base of a rifle magazine, the original Magpul provides improved speed and controllability during high stress, tactical magazine changes. Durable synthetic rubber loop with recessed rough gripping surface. Quick and easy installation and removal. Patented design based upon the tried-and-true para-cord loops and duct-tape tabs used with special warfare units worldwide.Made in the USA.IMPROVED SPEED AND HANDLINGDesigned for use during high stress, tactical magazine changes. Improves speed of reload and controlSIMPLE & DURABLEA simple and durable synthetic rubber loop with recessed rough gripping for added tactile feelHIGHLY COMPATIBLEThe Magpul fits most aluminum, steel, and polymer magazinesTechnical SpecificationsMore InformationPlatform AR10, M110, SR25Compatibility Most aluminum, steel, and polymer 7.62 magazines 

When installed on the base of sheet metal 9mm submachine-gun magazines, the original Magpul provides improved speed and controllability during high stress, tactical magazine changes. Durable synthetic rubber loop with recessed rough gripping surface. Quick and easy installation and removal.Patented design based upon the tried-and-true para-cord loops and duct-tape tabs used by special warfare units worldwide.Made in the USA.NSN: MAG003-BLK 1005-01-554-2864Technical SpecificationsMore InformationCaliber 9x19mm ParabellumPlatform MP5®

A higher-capacity version of our proven PMAG 5 7.62 AC, the PMAG 10 7.62 AC is a reliable and durable polymer magazine for the .308 Winchester-based family of cartridges.Compatible with short action AICS-spec bottom metal, to include the Bolt Action Magazine Well for the Hunter 700 Stock, the PMAG 10 7.62 AC brings additional capacity in an affordable and reliable package. Featuring GEN M3® technology, a paint-pen dot matrix for visual identification, and a flared base plate for positive control and ease of retrieval, the PMAG 10 7.62 AC sets a new standard for bolt action magazines.Made in the USA.10 ROUND CAPACITYA higher capacity to reduce reloads and keep you on target longerEASY IDENTIFICATIONUtilize the paint pen dot matrix to easily identify magazines with different loadoutsENGINEERED TO FEEDNext-generation impact and crush resistant polymer construction, a long life stainless steel spring, and a self-lubricating follower for increased reliabilityIMPROVED FLOORPLATEWith a flared and detachable floorplate, handling this magazine and disassembling for maintenance is easyTechnical SpecificationsMore InformationCollection Hunting Stocks and AccessoriesCaliber 7.62x51mm / .308 WinchesterCapacity 10 RoundsWeight 4.4 oz.Length, max 5.1 in.Compatibility Compatible with short action AICS pattern bottom metal and cartridges built on a 0.470" case head such as 7.62x51/.308 Winchester, 7mm-08 Remington, 6.5mm Creedmoor, .260 Remington, .243 Winchester, and others*Other Specs *PLEASE NOTE: Not compatible with smaller base diameter cartridges such as .220 Swift, .223 Remington, .300 AAC Blackout, etc. or larger short action magnums. In addition, due to the wide variety and potential combinations of aftermarket receivers, stocks, chassis, and bottom metal that accept AICS pattern mags, minor fitting may be required.Not compatible with Accuracy International AE rifles or semi-auto platforms utilizing SR25/M110 pattern magazines.The Sig Cross rifles ship with a Magpul PMAG 5 7.62 AC that has a proprietary sled follower for optimized single-round loading through the ejection port. The standard PMAG 5 7.62 AC (MAG549) and PMAG 5 7.62 AC (MAG579) are compatible with the Sig Cross, and feeding performance will be the same from the Sig Cross OEM Magpul magazine or the standard Magpul PMAG 7.62 AC magazines.The PMAG 10 7.62 AC magazine is optimized for the .308 Winchester based family of cartridges and is compatible with short action AICS-spec bottom metal, to include the Bolt Action Magazine Well for the Hunter 700 Stock, and in most platforms performs exceptionally well in similar, but non-.308 based cartridges, such as 6.5 Creedmoor. While other rifle platforms, such as the Ruger American Rifle®, can be upgraded for use with AICS-spec bottom metal and magazines, the internal design features may present some feeding and reliability concerns when used with the standard PMAG 10 7.62 AC magazine in non-.308 based calibers.As such, Magpul does not recommend the PMAG 10 7.62 AC for calibers other than .308-based cartridges in the Ruger American Rifle® in the Hunter American stock, and results may vary in other actions with 3-lug bolts. For optimal feeding and reliability with the Hunter American in cartridges like 6.5 Creedmoor, it is recommended to utilize only the updated Magpul PMAG 5 7.62 AC, easily identified with its brown lock plate and follower for complete Magpul reliability.

The PMAG 20 LR/SR GEN M3 is a lightweight, cost effective, highly reliable 20-round magazine for SR25/M110 pattern rifles chambered in 7.62x51 NATO (.308 Winchester).Our GEN M3 PMAGs feature a long-life stainless steel spring, an anti-tilt, self-lubricating follower, and constant-curve internal geometry for reliable feeding. Low profile ribs and an aggressive front and rear texture give positive control of the GEN M3 in all environments, and a paint pen dot matrix at the bottom panel of the body to allow easy marking by the end user for identification. The easy-to-disassemble flared floorplate aids extraction and handling of the magazine while providing improved drop protection, and better compatibility with tight double and triple magazine pouches. Its simple, tool-less disassembly makes for easy cleaning and maintenance.Designed specifically for SAAMI-spec ammunition, the PMAG 20 LR/SR GEN M3 is less than half the weight of standard issue steel magazines and maintains a service life round count approximately equal to the rifle barrel itself.Made in the USA.20-ROUND RELIABILITYAnti-tilt, self-lubricating follower, a high-quality stainless steel spring, and constant-curve internal geometry ensure smooth feedingEASY IDENTIFICATIONUse the paint pen dot matrix to easily identify your different loads when it's crunch time RUGGED MAGPUL POLYMERNext-generation impact and crush-resistant polymer construction with a high-quality stainless steel spring for corrosion resistanceRibbed gripping surface and a new aggressive front and rear texture for positive magazine handlingTechnical SpecificationsMore InformationCaliber 7.62x51mm / .308 WinchesterPlatform AR10, M110, SR25Capacity 20Weight 5.9 oz.Length, max 6.5 in.Compatibility Armalite AR-10A, Colt LE901-16S, CORE Rifle Systems CORE30, JP Enterprises LRP-07, KAC SR25, LaRue OBR, Les Baer .308, LMT .308 MWS, LWRCI REPR, Mega Arms MATEN, Noveske Gen III N6, POF P-308, Ruger SR-762, S&W M&P10, SIG716, and others*Other Specs Optimized for use with SAAMI-spec 7.62x51/.308 Winchester ammunition.*NOTE: Compatible with older model Bushmaster .308 ORC, Remington R-25, and DPMS LR308 rifles, but not optimized for bolt lock functionality with newer models based on the DPMS GII design. NOT compatible with Armalite AR-10B, Springfield Armory M1A, Rock River Arms LAR8, FN SCAR 17S, PTR-91, HK417 or any other rifles that utilize M14, FN FAL, or HK 91/G3 patterned magazines.

The PMAG 30 AK/AKM MOE is an inexpensive, lightweight, highly reliable 30-round polymer magazine designed for Kalashnikov-pattern rifles in 7.62x39mm (AK-47, AKM, AKS, SIG556R and others).It features a removable floorplate, constant curve geometry, stainless steel spring, and a high-reliability / low-friction follower for the affordable performance you expect from a MOE PMAG.This magazine counts as three US compliance parts for 922(r).Made in the USA.THE 30-ROUND AK STANDARD IN MOE30-round reliability and no stoppagesIMPROVED FLOORPLATEFlared floorplate aids magazine handling and disassembly and is slim enough for use with most pouchesADVANCED FOLLOWERThe anti-tilt, self-lubricating follower ensures a smooth feed and magazine reliabilityEASY IDENTIFICATIONUse the paint pen dot matrix to easily identify your different loads when it's crunch timeTechnical SpecificationsMore InformationCaliber 7.62x39mmPlatform AK / AKMCapacity 30 roundsWeight 6.5 oz.Length, max 9.1 in. 

The next-generation PMAG 30 AR/M4 GEN M3 is a 30-round polymer magazine for AR15/M4 compatible weapons chambered in 5.56x45 NATO / .223 Remington. Along with expanded feature set and compatibility, the GEN M3 incorporates new material technology and manufacturing processes for enhanced strength, durability, and reliability that exceed rigorous military performance specifications.While the GEN M3 is optimized for Colt-spec AR15/M4 platforms, modified internal and external geometry also permits operation with a range of additional weapons, such as the HK® 416/MR556A1/M27 IAR, British SA-80, FN® SCAR™ MK 16/16S, and others.Similar to the MOE® PMAG, the GEN M3 features a long-life USGI-spec stainless steel spring for commonality, a four-way anti-tilt follower, constant-curve internal geometry for reliable feeding, and simple tool-less disassembly for easy cleaning.The PMAG 30 GEN M3 also includes a redesigned bolt catch notch in the rear of the magazine that provides increased bolt catch clearance, while an over-travel stop on the spine helps ensure the magazine will not over-insert on compatible weapons. Low profile ribs and new, aggressive front and rear texture give positive control of the GEN M3 in all environments, and a paint pen dot matrix has been added to the bottom panel of the body to allow easy marking for identification. The new, easy to disassemble flared floorplate aids extraction and handling of the magazine while providing improved drop protection, but is slightly slimmer than before for better compatibility with tight double and triple magazine pouches.Made in the U.S.A.NSN: MAG557-BLK 1005-01-628-510630 ROUNDS IS THE STANDARD30-round reliability with no stoppagesEASY IDENTIFICATIONUse the paint pen dot matrix to easily identify your different loads when it's crunch timeADVANCED FOLLOWERThe anti-tilt, self-lubricating follower ensures a smooth feed and magazine reliabilitySLIMLINE FLOORPLATEImproved flared floorplate aids magazine handling and disassembly and is slim enough for use with many double and triple pouchesTechnical SpecificationsMore InformationCaliber 5.56x45mm / .223 RemingtonPlatform AR15, M4, M16, SA-80Capacity 30 rdsWeight 5 oz.Length, max 7.5 in.Compatibility Wide compatibility with most 'STANAG 4179' platforms such as the AR15, M4, M16, SCAR MK16/16S, HK416, MR556, M27 IAR, IWI Tavor, and others

The PMAG 35 EV9 is a lightweight, 35-round, 9x19mm CZ Scorpion EVO 3 and 3+ compatible magazine. The PMAG 35 EV9 provides optimal round stack geometry, giving the large format pistol, PCC, and SMG market a pistol caliber magazine with Magpul reliability and increased magazine capacity at a competitive price point.Magazine counts as three US compliance parts for 922(r).Made in the USA.INCREASED CAPACITY35-round capacity with indicator windows at 10, 20, 30, and 35-round intervalsEASY DISASSEMBLYEasy to disassemble floorplate design for cleaningIncludes a paint pen dot matrix for magazine identificationWIDE COMPATIBILITYDual mag catch slots compatible with EVO 3 and 3+ pattern magazine wellsHigh-visibility follower and stainless steel spring for smooth feeding with all ammo typesLEGENDARY MAGPUL POLYMERAdvanced polymer construction and an impact-resistant floor plateTechnical SpecificationsMore InformationCaliber 9x19mm ParabellumPlatform CZ Scorpion® EVO3/3+Capacity 35 roundsCompatibility Compatible with CZ Scorpion EVO 3 and 3+ pattern magazine wells 

The PMAG 5 AC L, Magnum is a reliable and durable polymer magazine for .300 Winchester Magnum-based family of cartridges and is compatible with long action AICS-spec bottom metal, to include the Bolt Action Magazine Well 700L for the Hunter 700L Stock.Featuring GEN M3 technology, a paint-pen dot matrix for visual identification, and a flared base plate for positive control and ease of retrieval, the PMAG 5 AC, L Magnum - AICS sets a new standard for bolt action magazines.Made in the USANSN: MAG698-BLK 1005-01-671-9094TRUE 5 ROUND CAPACITYOur upgraded GEN M3 long action AICS magazine with the ability to get a sixth roundLEGENDARY MAGPUL POLYMER PERFORMANCENext-generation impact and crush resistant polymer construction, a long life stainless steel spring, and the flared floorplate all spell reliability. Easy to disassemble for maintenanceEASY IDENTIFICATIONUtilize the paint pen dot matrix to easily identify magazines with different loadoutsCOMPATIBILITYCompatible with long action AICS (Accuracy International Chassis Systems) pattern bottom metal and Magnum cartridges built on a 0.530" belted case head such as .300 Winchester, .257 Weatherby, .264 Winchester, .270 Weatherby, 7mm Remington and others*Accepts a cartridge overall length of up to 3.50"Technical SpecificationsMore InformationCollection Hunting Stocks and AccessoriesCaliber .300 Winchester MagnumCapacity 5 RoundsWeight 2.8 oz.Length, max 3.8 in.Compatibility Compatible with long action AICS (Accuracy International Chassis Systems) pattern bottom metal and Magnum cartridges built on a 0.530" belted case head such as .300 Winchester, .257 Weatherby, .264 Winchester, .270 Weatherby, 7mm Remington and others*Other Specs Accepts a cartridge overall length of up to 3.50"*NOTE: NOT compatible with .404 Jeffery based cartridges and its derivatives such as the Remington Ultra Magnums (RUM/RSAUM) and Winchester Short Magnums (WSM/WSSM)

The PMAG 5 AC L, Standard is a reliable and durable polymer magazine for .30-06 based-family of cartridges and is compatible with long action AICS-spec bottom metal, to include the Bolt Action Magazine Well 700L for the Hunter 700L Stock.Built using GEN M3 technology, this magazine is advanced in both material and manufacturing processes, providing an economical, lightweight, durable and reliable single-stack bolt action magazine. It comes standard as a 5-round capacity magazine for hunting regulation compliance, but the follower can be easily modified by the user to increase the capacity to six rounds for field, competition, or combat use.Made in the USATRUE 5 ROUND CAPACITY & RUGGED POLYMER CONSTRUCTIONOur upgraded GEN M3 long action AICS magazine with the ability to get a sixth roundNext-generation impact and crush resistant polymer construction, a long life stainless steel spring, and the flared floorplate all spell reliability. Easy to disassemble for maintenanceEASY IDENTIFICATIONUtilize the paint pen dot matrix to easily identify magazines with different loadoutsHIGH COMPATIBILTYCompatible with long action AICS (Accuracy International Chassis Systems) pattern bottom metal and cartridges built on a 0.470" case head such as .30-06 Springfield, .25-06 Remington, .270 Winchester, .280 Remington, 8mm-06, and others*Accepts a cartridge overall length of up to 3.50"Technical SpecificationsMore InformationCollection Hunting Stocks and AccessoriesCaliber .30-06 SpringfieldCapacity 5 RoundsWeight 2.9 oz.Length, max 3.8 in.Compatibility Compatible with long action AICS (Accuracy International Chassis Systems) pattern bottom metal and cartridges built on a 0.470" case head such as .30-06 Springfield, .25-06 Remington, .270 Winchester, .280 Remington, 8mm-06, and others*Other Specs Accepts a cartridge overall length of up to 3.50"*NOTE: Not recommended for use with short action cartridges such as the 7.62x51 / .308 Winchester 

Our PMAGs are known for their unsurpassed reliability, durability and ease-of-use. The PMAG D-50 EV9 remains true to these qualities, while also significantly increasing the capacity of our PMAG® 35 EV9™ – CZ Scorpion® EVO 3/3+ stick magazine. The D-50 EV9 is a lightweight, 50-round, 9x19mm Parabellum drum magazine designed for large-format pistols and pistol-caliber carbines that feed from CZ Scorpion EVO 3/3+ pattern magazines.Incorporating many of the proven features of its 5.56 and 7.62 predecessors, the unique drum configuration keeps the height of the magazine manageable, allowing for prone firing and easy storage in a design that cuts down on time-critical reloads. For easy loading, it includes a ratcheting loading lever that removes tension from the spring. To keep track of your available firepower we’ve included a rounds-remaining rear window and a high-visibility follower. We also incorporated an innovative bolt hold-open feature that reliably locks the bolt back on the last round on those firearms compatible with standard CZ Scorpion EVO 3 magazine followers.The D-50 EV9 ships with an enhanced power magazine release spring for use in Scorpion EVO 3+ models.Made in the USA.Technical SpecificationsMore InformationCollection DrumsCaliber 9x19mm ParabellumPlatform CZ Scorpion® EVO3/3+Capacity 50Weight 15.6 oz.Compatibility Compatible with CZ Scorpion EVO 3 and 3+ pattern magazine wells 

PROMAG BLACK POLYMER RIFLE MAG MINI-14 .223 42 RD

10/22 MAGAZINE 22LR 10 ROUND

Ruger's factory magazines features high quality components and precise manufacturing that will ensure long-lasting performance and reliability.Polymer Body Material25-Round CapacitySteel Feed Lips