REPTILIA dot mount for aimpoint micro 1.93" blk

Introducing the 1.93 inch bore height AUS Mount for 30mm diameter magnified optics, from Reptilia. Driven by the request of an end user group, the AUS Mount is the culmination of a 2 year development program. Like our DOT Mount line the AUS Mount attaches to any M1913 Picatinny rail via our anti-snag spring-loaded nitrided steel clamp and custom bolt mounting system which can be tightened with a T-25 Torx or a flat blade driver to sit flush with the body of the mount for a low-profile, streamline design. Also like our DOT Mount line, the AUS mount is machined from a single piece of billet 7075-T6 aluminum and is finished with MIL-STD Type III, Class 2, hard anodize coating.The AUS is compatible with all of our existing 30mm ROF line.

Introducing the 1.93 inch bore height AUS Mount for 30mm diameter magnified optics, from Reptilia. Driven by the request of an end user group, the AUS Mount is the culmination of a 2 year development program. Like our DOT Mount line the AUS Mount attaches to any M1913 Picatinny rail via our anti-snag spring-loaded nitrided steel clamp and custom bolt mounting system which can be tightened with a T-25 Torx or a flat blade driver to sit flush with the body of the mount for a low-profile, streamline design. Also like our DOT Mount line, the AUS mount is machined from a single piece of billet 7075-T6 aluminum and is finished with MIL-STD Type III, Class 2, hard anodize coating.The AUS is compatible with all of our existing 30mm ROF line.Like all Reptilia products, the AUS Mount is 100% made in the USA and carries a full lifetime warranty against manufacturer defects. 

Introducing the AUS Mount for 30mm diameter magnified optics, from Reptilia. Driven by the request of an end user group, the AUS Mount is the culmination of a 2 year development program. Like our DOT Mount line the AUS Mount attaches to any M1913 Picatinny rail via our anti-snag spring-loaded nitrided steel clamp and custom bolt mounting system which can be tightened with either a 5/32 hex or a flat blade driver to sit flush with the body of the mount for a low-profile, streamline design. Also like our DOT Mount line, the AUS mount is machined from a single piece of billet 7075-T6 aluminum and is finished with MIL-STD Type III, Class 2, hard anodize coating.The AUS is compatible with all of our existing 30mm ROF line, and will be compatible with several new ROF products launching over the coming months.Like all Reptilia products, the AUS Mount is 100% made in the USA and carries a full lifetime warranty against manufacturer defects.

Introducing the AUS Mount for 30mm diameter magnified optics, from Reptilia. Driven by the request of an end user group, the AUS Mount is the culmination of a 2 year development program. Like our DOT Mount line the AUS Mount attaches to any M1913 Picatinny rail via our anti-snag spring-loaded nitrided steel clamp and custom bolt mounting system which can be tightened with either a 5/32 hex or a flat blade driver to sit flush with the body of the mount for a low-profile, streamline design. Also like our DOT Mount line, the AUS mount is machined from a single piece of billet 7075-T6 aluminum and is finished with MIL-STD Type III, Class 2, hard anodize coating.The AUS is compatible with all of our existing 30mm ROF line, and will be compatible with several new ROF products launching over the coming months.Like all Reptilia products, the AUS Mount is 100% made in the USA and carries a full lifetime warranty against manufacturer defects.

Introducing the AUS Mount for 34mm diameter magnified optics, from Reptilia. Driven by the request of an end user group, the AUS Mount is the culmination of a 2 year development program. Like our DOT Mount line the AUS Mount attaches to any M1913 Picatinny rail via our anti-snag spring-loaded nitrided steel clamp and custom bolt mounting system which can be tightened with either a 5/32 hex or a flat blade driver to sit flush with the body of the mount for a low-profile, streamline design. Also like our DOT Mount line, the AUS mount is machined from a single piece of billet 7075-T6 aluminum and is finished with MIL-STD Type III, Class 2, hard anodize coating.The AUS is compatible with all of our existing 34mm ROF line, and will be compatible with several new ROF products launching over the coming months.Like all Reptilia products, the AUS Mount is 100% made in the USA and carries a full lifetime warranty against manufacturer defects.

Introducing the AUS Mount for 35mm diameter magnified optics, from Reptilia. Driven by the request of an end user group, the AUS Mounts are the culmination of a 2 year development program. Like our DOT Mount line the AUS Mount attaches to any M1913 Picatinny rail via our anti-snag spring-loaded nitrided steel clamp and custom bolt mounting system which can be tightened with either a 5/32 hex or a flat blade driver to sit flush with the body of the mount for a low-profile, streamline design. Also like our DOT Mount line, the AUS mount is machined from a single piece of billet 7075-T6 aluminum and is finished with MIL-STD Type III, Class 2, hard anodize coating.Like all Reptilia products, the AUS Mount is 100% made in the USA and carries a full lifetime warranty against manufacturer defects.  

Introducing the next addition to our line of AR pattern grips, the CQG-NB Grip. The CQG-NB (No-Beavertail) has all of the geometry users have loved in the CQG for 4 years now, specifically designed to enhance ergonomics and performance of compact sized short-barreled rifles, AR15 pistols, pistol caliber carbines, and PDWs , with the only difference being the removal of the “beavertail” in the thumb web area, to get closer to the A2 feel that some users prefer.The CQG-NB Grip will launch in all of our colors the CQG has been shipping in, Black,  Flat Dark Earth (FDE), Field Drab (Fed. Std. 30118), Mid-Grey, and OD Green.The CQG-NB supports a wide range of hand sizes and weapon configurations, featuring a more pronounced vertical grip angle, anti-slip front and rear texture; the CQG encourages the shooter’s hand to be positioned higher on the grip, for greater control and improved comfort.

Introducing the next addition to our line of AR pattern grips, the CQG-NB Grip. The CQG-NB (No-Beavertail) has all of the geometry users have loved in the CQG for 4 years now, specifically designed to enhance ergonomics and performance of compact sized short-barreled rifles, AR15 pistols, pistol caliber carbines, and PDWs , with the only difference being the removal of the “beavertail” in the thumb web area, to get closer to the A2 feel that some users prefer.The CQG-NB Grip will launch in all of our colors the CQG has been shipping in, Black,  Flat Dark Earth (FDE), Field Drab (Fed. Std. 30118), Mid-Grey, and OD Green.The CQG-NB supports a wide range of hand sizes and weapon configurations, featuring a more pronounced vertical grip angle, anti-slip front and rear texture; the CQG encourages the shooter’s hand to be positioned higher on the grip, for greater control and improved comfort.

Introducing the next addition to our line of AR pattern grips, the CQG-NB Grip. The CQG-NB (No-Beavertail) has all of the geometry users have loved in the CQG for 4 years now, specifically designed to enhance ergonomics and performance of compact sized short-barreled rifles, AR15 pistols, pistol caliber carbines, and PDWs , with the only difference being the removal of the “beavertail” in the thumb web area, to get closer to the A2 feel that some users prefer.The CQG-NB Grip will launch in all of our colors the CQG has been shipping in, Black,  Flat Dark Earth (FDE), Field Drab (Fed. Std. 30118), Mid-Grey, and OD Green.The CQG-NB supports a wide range of hand sizes and weapon configurations, featuring a more pronounced vertical grip angle, anti-slip front and rear texture; the CQG encourages the shooter’s hand to be positioned higher on the grip, for greater control and improved comfort.

Introducing the next addition to our line of AR pattern grips, the CQG-NB Grip. The CQG-NB (No-Beavertail) has all of the geometry users have loved in the CQG for 4 years now, specifically designed to enhance ergonomics and performance of compact sized short-barreled rifles, AR15 pistols, pistol caliber carbines, and PDWs , with the only difference being the removal of the “beavertail” in the thumb web area, to get closer to the A2 feel that some users prefer.The CQG-NB Grip will launch in all of our colors the CQG has been shipping in, Black,  Flat Dark Earth (FDE), Field Drab (Fed. Std. 30118), Mid-Grey, and OD Green.The CQG-NB supports a wide range of hand sizes and weapon configurations, featuring a more pronounced vertical grip angle, anti-slip front and rear texture; the CQG encourages the shooter’s hand to be positioned higher on the grip, for greater control and improved comfort.

Introducing the next addition to our line of AR pattern grips, the CQG-NB Grip. The CQG-NB (No-Beavertail) has all of the geometry users have loved in the CQG for 4 years now, specifically designed to enhance ergonomics and performance of compact sized short-barreled rifles, AR15 pistols, pistol caliber carbines, and PDWs , with the only difference being the removal of the “beavertail” in the thumb web area, to get closer to the A2 feel that some users prefer.The CQG-NB Grip will launch in all of our colors the CQG has been shipping in, Black,  Flat Dark Earth (FDE), Field Drab (Fed. Std. 30118), Mid-Grey, and OD Green.The CQG-NB supports a wide range of hand sizes and weapon configurations, featuring a more pronounced vertical grip angle, anti-slip front and rear texture; the CQG encourages the shooter’s hand to be positioned higher on the grip, for greater control and improved comfort.

Our much-anticipated CQG grip for AK47 platforms is here, designed to improve ergonomics and weapon control for your Kalashnikov rifle.Featuring a more vertical grip angle, enhanced beavertail design, and anti-slip texture on the front and rear, the CQG for AK encourages a higher hand position, offering superior comfort and control across a variety of shooting styles. Built for durability, the grip is molded from tough, reinforced nylon and made right here in the USA.

Reptilia's much-anticipated CQG grip for AK47 platforms is here, designed to improve ergonomics and weapon control for your Kalashnikov rifle.Featuring a more vertical grip angle, enhanced beavertail design, and anti-slip texture on the front and rear, the CQG for AK encourages a higher hand position, offering superior comfort and control across a variety of shooting styles. Built for durability, the grip is molded from tough, reinforced nylon and made right here in the USA. 

Reptilia's much-anticipated CQG grip for AK47 platforms is here, designed to improve ergonomics and weapon control for your Kalashnikov rifle.Featuring a more vertical grip angle, enhanced beavertail design, and anti-slip texture on the front and rear, the CQG for AK encourages a higher hand position, offering superior comfort and control across a variety of shooting styles. Built for durability, the grip is molded from tough, reinforced nylon and made right here in the USA.

The DOT Mount™ by Reptilia is a lightweight, slim-line mounting solution for a variety of red dot optics.  Machined from billet 7075-T6 aluminum with Milspec Type III hard anodized finish, the DOT Mount attaches to any M1913 Picatinny rail, and offers lower 1/3 co-witness with standard AR15-style back-up sights.  Its spring-loaded nitrided steel clamp and mounting bolt simplify the installation process, and sit flush with the body of the mount for a low-profile, anti-snag design.Like all Reptilia products, the DOT Mount is 100% made in the USA and carries a full lifetime warranty against manufacturer defects.

The 1.93 DOT Mount™ for Holosun HE509T by Reptilia is a lightweight, slim-line mounting solution for a variety of red dot optics.  Machined from billet 7075-T6 aluminum with Milspec Type III hard anodized finish, the 1.93 DOT Mount attaches to any M1913 Picatinny rail to place the optical axis at 1.93 inches above the rail.  Its spring-loaded nitrided steel clamp and mounting bolt simplify the installation process, and sit flush with the body of the mount for a low-profile, anti-snag design.Like all Reptilia products, the DOT Mount is 100% made in the USA and carries a full lifetime warranty against manufacturer defects.

The 1.93 inch height DOT Mount™ for Leupold® Delta Point Pro and EOTech EFLX™ by Reptilia is a lightweight, slim-line mounting solution for a number of red dot optics that utilize the Delta Point Pro mounting geometry.  Machined from billet 7075-T6 aluminum with Milspec Type III hard anodized finish, the 1.93 DOT Mount attaches to any M1913 Picatinny rail to place the optical axis at 1.93 inches above the rail.  Its spring-loaded nitrided steel clamp and mounting bolt simplify the installation process, and sit flush with the body of the mount for a low-profile, anti-snag design.Like all Reptilia products, the DOT Mount is 100% made in the USA and carries a full lifetime warranty against manufacturer defects. 

The 1.93 inch height DOT Mount™ for Leupold® Delta Point Pro and EOTech EFLX™ by Reptilia is a lightweight, slim-line mounting solution for a number of red dot optics that utilize the Delta Point Pro mounting geometry.  Machined from billet 7075-T6 aluminum with Milspec Type III hard anodized finish, the 1.93 DOT Mount attaches to any M1913 Picatinny rail to place the optical axis at 1.93 inches above the rail.  Its spring-loaded nitrided steel clamp and mounting bolt simplify the installation process, and sit flush with the body of the mount for a low-profile, anti-snag design.Like all Reptilia products, the DOT Mount is 100% made in the USA and carries a full lifetime warranty against manufacturer defects.

Introducing the Ambidextrous Safety Selector, machined from billet 7075-T6 aluminium and coated in a variety of anodizing to match other popular Reptilia accessories. The Reptilia Selector is designed to be operated comfortably by both left and right handed shooters. Utilizing the same hand movements without either hand having to break away from the grip will ensure the shooter’s accuracy and application. The safety selector will be offered in a slick 75 degree throw and compatible with all MILSPEC lowers.

Introducing the Ambidextrous Safety Selector, machined from billet 7075-T6 aluminium and coated in a variety of anodizing to match other popular Reptilia accessories. The Reptilia Selector is designed to be operated comfortably by both left and right handed shooters. Utilizing the same hand movements without either hand having to break away from the grip will ensure the shooter’s accuracy and application. The safety selector will be offered in a slick 75 degree throw and compatible with all MILSPEC lowers.

Introducing the Puller ambidextrous charging handle. Designed at the request of a military end user, the Charging Handle is low profile, sturdy, and a must have upgrade for any shooting style. Made from billet 7075-T6 aluminum and finished with MIL-STD Type III, Class 2 hard anodize. It’s compatible with AR15 style uppers and is available in Black, FDE and Clear.As with all Reptilia products, the charging handle is made in the USA and includes a full lifetime warranty against manufacturer defects.

Introducing the RECC·E™ SR-15/M4/AR-15 Carbine Stock by Reptilia®! After more than two years of development and testing, Reptilia is proud to announce the RECC·E Stock for AR15/M4. Designed at the request of a military end user, the RECC·E Stock features a constant cheek weld, ambidextrous QD sling attachment points, rubber buttpad, and a modular design that allows usage of a standard AR15 carbine buffer system, or A5/SR25 carbine buffer system by replacing the receiver extension (buffer tube) and forward portion of the stock. Weighing only 12.0 ounces including the proprietary AR15 carbine-length receiver extension, the RECC·E stock is the ideal lightweight solution for the entire spectrum of AR-pattern guns from compact to precision. 

Introducing the Socket™ Mount M-LOK® Sling Loop attachment point, from Reptilia. Driven by the request of a military end user group, for an anti-snag, low profile, quiet M-LOK attachment.The Socket mount is machined from a single piece of billet 7075-T6 aluminum and offers a universal connection point. This socket  is finished with MIL-STD Type III, Class 2, hard anodize coating.Like all Reptilia products, the M-LOK® Sling Loop Mount is 100% made in the USA and carries a full lifetime warranty against manufacturer defects. 

Introducing the Socket™ Mount M-LOK® Sling Loop attachment point, from Reptilia. Driven by the request of a military end user group, for an anti-snag, low profile, quiet M-LOK attachment.The Socket mount is machined from a single piece of billet 7075-T6 aluminum and offers a universal connection point. This socket  is finished with MIL-STD Type III, Class 2, hard anodize coating.Like all Reptilia products, the M-LOK® Sling Loop Mount is 100% made in the USA and carries a full lifetime warranty against manufacturer defects.