Grips Hogue® Stippled HardwoodFront Sight Fiber OpticBarrel Length 4.20"Material Stainless SteelCapacity 6Rear Sight AdjustableTwist 1:18.75" RHFinish Satin StainlessOverall Length 9.50"Weight 38 oz.Grooves 5Catalog KGP-141-MCAUPC7-36676-01755-3Triple-locking contoured cylinder is locked into the frame at the front, rear and bottom for more positive alignment and dependable operation shot after shot and enables easy re-holstering. The ejector and chamber mouths have a light chamfer to aid loading.Grip frame design easily accommodates a wide variety of custom grips.Disassembly of integrated subassemblies requires no special tools and allows for easy maintenance and assembly.Transfer bar mechanism provides an unparalleled measure of security against accidental discharge.An adjustable rear sight and fiber optic front sight allows for a fast and visible sight picture.A custom Hogue® hardwood grip with stippled sides permits an ideal grip for competition shooting.The half-lug 4.2" barrel delivers lively handling for quick transition between targets and also features an 11° target crown for competitive-level accuracy.Polished and optimized internals, a centering boss on the trigger, and centering shims on the hammer produce a smooth double-action trigger pull and a crisp and consistent let-off.

RUGER MARK IV 22/45 LITE NON-THREADED

Grips Black Checkered Hard RubberFront Sight RampBarrel Length 6.50"Extra Cylinder 22 WMRCapacity 6Rear Sight AdjustableTwist 1:14" RHMaterial Alloy SteelFinish BluedOverall Length 12"Weight 35 oz.Grooves 6UPC 7-36676-00622-9Windage- and elevation-adjustable rear sights help put you on target and keep you there.Chambered for affordable rimfire shooting.Transfer bar mechanism and loading gate interlock provide an unparalleled measure of security against accidental discharge.Cold hammer-forged barrel results in ultra-precise rifling that provides exceptional accuracy and longevity.Extra cylinder allows shooters to quickly change from shooting .22 LR to .22 WMR.

Stock Textured Black Speckle FDE Magpul MOE X-22Capacity 10Barrel Material Stainless Steel Tensioned with Carbon Fiber SleeveBarrel Finish Clear SatinThread Pattern 1/2"-28Sights NoneWeight 3.5 lb.Twist 1:16" RHOverall Length 34.10"Barrel Length 16.10"Length of Pull 13.50"Grooves 6The lightweight Magpul MOE X-22 Stock features M-LOK slots at the 6 o'clock position, as well as Magpul's own exclusive TSP texture on the pistol grip.Cold hammer-forged barrel tensioned in carbon fiber sleeve features a 1/2"-28 threaded muzzle and is fitted with a thread cap which can be removed to allow for the use of muzzle accessories.BX-Trigger® with a light, crisp 2.5 - 3 pound trigger pull weight with minimal overtravel and a positive reset.Detachable 10-round rotary magazine features a unique rotor to separate cartridges and provide reliable feeding.Easy-to-use, extended magazine release provides smooth, no-fuss removal of flush-mounted magazine.Positive, push-button, cross-bolt manual safety.Factory-installed, one-piece aluminum scope rail.Heat-stabilized, glass-filled, polymer trigger housing assembly is precision made of high-tech material for improved manufacturing tolerances, impact and abrasion-resistance and an unmatched ability to withstand the elements.This legendary action is a tried and true Ruger design that ensures consistent, reliable performance.

Stock Gray Splatter Gen II AmericanBarrel Fluting SpiralBarrel Length 20"Barrel Finish Gun Metal Gray CerakoteThread Pattern 5/8"-24Capacity 3Magazine Type AI-StyleSights None-Picatinny Scope BaseMaterial Alloy SteelWeight 6.4 lb.Twist 1:10" RHOverall Length 41.25"Length of Pull 12" - 13.75"Grooves 5Splatter finished stock provides excellent grip without being too sharp or abrasive.Soft rubber recoil pad features a large radius on the heel for easy shouldering and improved geometry that progressively collapses to reduce felt recoil.Removing the installed spacer allows for length of pull to be adjusted from 13.75" to 12". Additional spacers of varying sizes for a more refined fit are available at ShopRuger.com.Installed low comb improves sight alignment when using magnified optics but can be removed when utilizing low-mounted sights. More comb options are available at ShopRuger.com to further refine the fit.Professionally applied Cerakote coating on barrel, muzzle brake, receiver and bolt handle results in a durable, easy-to-maintain finish.Medium contour barrel features deep spiral flutes that reduce weight at the muzzle end of the barrel to improve balance without sacrificing stiffness or accuracy.Threaded barrel with factory-installed radial port muzzle brake is cold hammer-forged, resulting in ultra-precise rifling that provides exceptional accuracy and longevity.Intuitive three-position tang safety locks the bolt, preventing inadvertent bolt opening while allowing the rifle to be loaded with the safety engaged.Ruger Marksman Adjustable™ trigger offers a crisp release with a pull weight that is user-adjustable between 3 and 5 pounds.Patented Power Bedding™ integral bedding block system positively locates the receiver and free-floats the barrel for outstanding accuracy.The one-piece bolt is CNC machined from stainless steel for smooth operation and the familiar three-lug design with 70° throw provides ample scope clearance.Oversized bolt handle for positive bolt manipulation, with a 5/16"-24 thread pattern for easy replacement.Factory-installed, one-piece Picatinny scope base.Available accessory stock weight kit adds up to 1.6 pounds to the butt of the rifle to absorb recoil and improve the rifle's balance when utilizing heavier muzzle devices.Also includes: one magazine; steel sling swivel studs. 

Stock Gray Splatter Gen II AmericanBarrel Style Spiral FlutedBarrel Length 20"Barrel Finish Gun Metal Gray CerakoteThread Pattern 5/8"-24Capacity 3Magazine Type Single-StackSights None-Picatinny Scope BaseMaterial Alloy SteelWeight 6.4 lb.Twist 1:8" RHOverall Length 41.75"Length of Pull 12" - 13.75"Grooves 5Splatter finished stock provides excellent grip without being too sharp or abrasive.Soft rubber recoil pad features a large radius on the heel for easy shouldering and improved geometry that progressively collapses to reduce felt recoil.Removing the installed spacer allows for length of pull to be adjusted from 13.75" to 12". Installed low comb improves sight alignment when using magnified optics but can be removed when utilizing low-mounted sights. Professionally applied Cerakote coating on barrel, muzzle brake, receiver and bolt handle results in a durable, easy-to-maintain finish.Medium contour barrel features deep spiral flutes that reduce weight at the muzzle end of the barrel to improve balance without sacrificing stiffness or accuracy.Threaded barrel with factory-installed radial port muzzle brake is cold hammer-forged, resulting in ultra-precise rifling that provides exceptional accuracy and longevity.Intuitive three-position tang safety locks the bolt, preventing inadvertent bolt opening while allowing the rifle to be loaded with the safety engaged.Ruger Marksman Adjustable™ trigger offers a crisp release with a pull weight that is user-adjustable between 3 and 5 pounds.Patented Power Bedding™ integral bedding block system positively locates the receiver and free-floats the barrel for outstanding accuracy.The one-piece bolt is CNC machined from stainless steel for smooth operation and the familiar three-lug design with 70° throw provides ample scope clearance.Oversized bolt handle for positive bolt manipulation, with a 5/16"-24 thread pattern for easy replacement.Factory-installed, one-piece Picatinny scope base.Available accessory stock weight kit adds up to 1.6 pounds to the butt of the rifle to absorb recoil and improve the rifle's balance when utilizing heavier muzzle devices. Also includes: one magazine; steel sling swivel studs.

Stock Black Splatter Gen II AmericanBarrel Length 16.10"Barrel Finish Graphite Black CerakoteThread Pattern 5/8"-24Weight 6.6 lb.Capacity 3Magazine Type AI-StyleSights None-Picatinny Scope BaseMaterial Alloy SteelTwist 1:10" RHOverall Length 37.35"Length of Pull 12" - 13.75"Grooves 5Splatter finished stock provides excellent grip without being too sharp or abrasive.Soft rubber recoil pad features a large radius on the heel for easy shouldering and improved geometry that progressively collapses to reduce felt recoil.Removing the installed spacer allows for length of pull to be adjusted from 13.75" to 12". Installed low comb improves sight alignment when using magnified optics but can be removed when utilizing low-mounted sights. Professionally applied Cerakote coating on barrel, thread protector, receiver and bolt handle results in a durable, easy-to-maintain finish.Bull contour barrel increases weight for better stability and reduced felt recoil.Threaded barrel with factory-installed thread protector is cold hammer-forged, resulting in ultra-precise rifling that provides exceptional accuracy and longevity.Intuitive three-position tang safety locks the bolt, preventing inadvertent bolt opening while allowing the rifle to be loaded with the safety engaged.Ruger Marksman Adjustable™ trigger offers a crisp release with a pull weight that is user-adjustable between 3 and 5 pounds.Patented Power Bedding™ integral bedding block system positively locates the receiver and free-floats the barrel for outstanding accuracy.The one-piece bolt is CNC machined from stainless steel for smooth operation and the familiar three-lug design with 70° throw provides ample scope clearance.Oversized bolt handle for positive bolt manipulation, with a 5/16"-24 thread pattern for easy replacement.Factory-installed, one-piece Picatinny scope base.Available accessory stock weight kit adds up to 1.6 pounds to the butt of the rifle to absorb recoil and improve the rifle's balance when utilizing heavier muzzle devices. Also includes: one magazine; steel sling swivel studs.

Stock Black Splatter Gen II AmericanBarrel Length 20"Barrel Finish Smoked Bronze CerakoteThread Pattern 5/8"-24Weight 6.9 lb.Capacity 3Magazine Type AI-StyleSights None-Picatinny Scope BaseMaterial Alloy SteelTwist 1:10" RHOverall Length 41.25"Length of Pull 12" - 13.75"Grooves 5Splatter finished stock provides excellent grip without being too sharp or abrasive.Soft rubber recoil pad features a large radius on the heel for easy shouldering and improved geometry that progressively collapses to reduce felt recoil.Removing the installed spacer allows for length of pull to be adjusted from 13.75" to 12". Installed low comb improves sight alignment when using magnified optics but can be removed when utilizing low-mounted sights. More comb options are available at ShopRuger.com to further refine the fit.Professionally applied Cerakote coating on barrel, thread protector, receiver and bolt handle results in a durable, easy-to-maintain finish.Bull contour barrel increases weight for better stability and reduced felt recoil.Shallow spiral flutes increases surface area for additional cooling.Threaded barrel with factory-installed thread protector is cold hammer-forged, resulting in ultra-precise rifling that provides exceptional accuracy and longevity.Intuitive three-position tang safety locks the bolt, preventing inadvertent bolt opening while allowing the rifle to be loaded with the safety engaged.Ruger Marksman Adjustable™ trigger offers a crisp release with a pull weight that is user-adjustable between 3 and 5 pounds.Patented Power Bedding™ integral bedding block system positively locates the receiver and free-floats the barrel for outstanding accuracy.The one-piece bolt is CNC machined from stainless steel for smooth operation and the familiar three-lug design with 70° throw provides ample scope clearance.Oversized bolt handle for positive bolt manipulation, with a 5/16"-24 thread pattern for easy replacement.Factory-installed, one-piece Picatinny scope base.Available accessory stock weight kit adds up to 1.6 pounds to the butt of the rifle to absorb recoil and improve the rifle's balance when utilizing heavier muzzle devices. Also includes: one magazine; steel sling swivel studs.

Stock Black Splatter Gen II AmericanBarrel Length 20"Barrel Finish Smoked Bronze CerakoteThread Pattern 5/8"-24Weight 7 lb.Capacity 3Magazine Type AI-StyleSights None-Picatinny Scope BaseMaterial Alloy SteelTwist 1:8" RHOverall Length 41.25"Length of Pull 12" - 13.75"Grooves 5Splatter finished stock provides excellent grip without being too sharp or abrasive.Soft rubber recoil pad features a large radius on the heel for easy shouldering and improved geometry that progressively collapses to reduce felt recoil.Removing the installed spacer allows for length of pull to be adjusted from 13.75" to 12". Installed low comb improves sight alignment when using magnified optics but can be removed when utilizing low-mounted sights. More comb options are available at ShopRuger.com to further refine the fit.Professionally applied Cerakote coating on barrel, thread protector, receiver and bolt handle results in a durable, easy-to-maintain finish.Bull contour barrel increases weight for better stability and reduced felt recoil.Shallow spiral flutes increases surface area for additional cooling.Threaded barrel with factory-installed thread protector is cold hammer-forged, resulting in ultra-precise rifling that provides exceptional accuracy and longevity.Intuitive three-position tang safety locks the bolt, preventing inadvertent bolt opening while allowing the rifle to be loaded with the safety engaged.Ruger Marksman Adjustable™ trigger offers a crisp release with a pull weight that is user-adjustable between 3 and 5 pounds.Patented Power Bedding™ integral bedding block system positively locates the receiver and free-floats the barrel for outstanding accuracy.The one-piece bolt is CNC machined from stainless steel for smooth operation and the familiar three-lug design with 70° throw provides ample scope clearance.Oversized bolt handle for positive bolt manipulation, with a 5/16"-24 thread pattern for easy replacement.Factory-installed, one-piece Picatinny scope base.Available accessory stock weight kit adds up to 1.6 pounds to the butt of the rifle to absorb recoil and improve the rifle's balance when utilizing heavier muzzle devices. Also includes: one magazine; steel sling swivel studs.

Stock Green Splatter Gen II AmericanBarrel Style Spiral FlutedBarrel Length 22"Barrel Finish Burnt Bronze CerakoteThread Pattern 1/2"-28Capacity 10Magazine Type AR-StyleSights None-Picatinny Scope BaseMaterial Alloy SteelWeight 6.7 lb.Twist 1:7" RHOverall Length 43.25"Length of Pull 12" - 13.75"Grooves 5Splatter finished stock provides excellent grip without being too sharp or abrasive.Soft rubber recoil pad features a large radius on the heel for easy shouldering and improved geometry that progressively collapses to reduce felt recoil.Removing the installed spacer allows for length of pull to be adjusted from 13.75" to 12". Installed low comb improves sight alignment when using magnified optics but can be removed when utilizing low-mounted sights. More comb options are available at ShopRuger.com to further refine the fit.Professionally applied Cerakote coating on barrel, muzzle brake, receiver and bolt handle results in a durable, easy-to-maintain finish.Medium contour barrel features deep spiral flutes that reduce weight at the muzzle end of the barrel to improve balance without sacrificing stiffness or accuracy.Threaded barrel with factory-installed radial port muzzle brake is cold hammer-forged, resulting in ultra-precise rifling that provides exceptional accuracy and longevity.Intuitive three-position tang safety locks the bolt, preventing inadvertent bolt opening while allowing the rifle to be loaded with the safety engaged.Ruger Marksman Adjustable™ trigger offers a crisp release with a pull weight that is user-adjustable between 3 and 5 pounds.Patented Power Bedding™ integral bedding block system positively locates the receiver and free-floats the barrel for outstanding accuracy.The one-piece bolt is CNC machined from stainless steel for smooth operation and the familiar three-lug design with 70° throw provides ample scope clearance.Oversized bolt handle for positive bolt manipulation, with a 5/16"-24 thread pattern for easy replacement.Factory-installed, one-piece Picatinny scope base.Available accessory stock weight kit adds up to 1.6 pounds to the butt of the rifle to absorb recoil and improve the rifle's balance when utilizing heavier muzzle devices. Also includes: one magazine; steel sling swivel studs.

Stock Green Splatter Gen II AmericanBarrel Style Spiral FlutedBarrel Length 22"Barrel Finish Burnt Bronze CerakoteThread Pattern 5/8"-24Capacity 3Magazine Type Single-StackSights None-Picatinny Scope BaseMaterial Alloy SteelWeight 6.6 lb.Twist 1:8" RHOverall Length 43.75"Length of Pull 12" - 13.75"Grooves 5Splatter finished stock provides excellent grip without being too sharp or abrasive.Soft rubber recoil pad features a large radius on the heel for easy shouldering and improved geometry that progressively collapses to reduce felt recoil.Removing the installed spacer allows for length of pull to be adjusted from 13.75" to 12". Additional spacers of varying sizes for a more refined fit are available at ShopRuger.com.Installed low comb improves sight alignment when using magnified optics but can be removed when utilizing low-mounted sights. Professionally applied Cerakote coating on barrel, muzzle brake, receiver and bolt handle results in a durable, easy-to-maintain finish.Medium contour barrel features deep spiral flutes that reduce weight at the muzzle end of the barrel to improve balance without sacrificing stiffness or accuracy.Threaded barrel with factory-installed radial port muzzle brake is cold hammer-forged, resulting in ultra-precise rifling that provides exceptional accuracy and longevity.Intuitive three-position tang safety locks the bolt, preventing inadvertent bolt opening while allowing the rifle to be loaded with the safety engaged.Ruger Marksman Adjustable™ trigger offers a crisp release with a pull weight that is user-adjustable between 3 and 5 pounds.Patented Power Bedding™ integral bedding block system positively locates the receiver and free-floats the barrel for outstanding accuracy.The one-piece bolt is CNC machined from stainless steel for smooth operation and the familiar three-lug design with 70° throw provides ample scope clearance.Oversized bolt handle for positive bolt manipulation, with a 5/16"-24 thread pattern for easy replacement.Factory-installed, one-piece Picatinny scope base.Available accessory stock weight kit adds up to 1.6 pounds to the butt of the rifle to absorb recoil and improve the rifle's balance when utilizing heavier muzzle devices. Also includes: one magazine; steel sling swivel studs.

Stock Flat Dark Earth Splatter Gen II AmericanBarrel Style Spiral FlutedBarrel Length 16.10"Barrel Finish Cobalt CerakoteThread Pattern 5/8"-24Capacity 3Magazine Type AI-StyleSights None-Picatinny Scope BaseMaterial Alloy SteelWeight 6.2 lb.Twist 1:10" RHOverall Length 37.35"Length of Pull 12" - 13.75"Grooves 5Splatter finished stock provides excellent grip without being too sharp or abrasive.Soft rubber recoil pad features a large radius on the heel for easy shouldering and improved geometry that progressively collapses to reduce felt recoil.Removing the installed spacer allows for length of pull to be adjusted from 13.75" to 12". Installed low comb improves sight alignment when using magnified optics but can be removed when utilizing low-mounted sights. Professionally applied Cerakote coating on barrel, muzzle brake, receiver and bolt handle results in a durable, easy-to-maintain finish.Medium contour barrel features deep spiral flutes that reduce weight at the muzzle end of the barrel to improve balance without sacrificing stiffness or accuracy.Compact, threaded barrel with factory-installed radial port muzzle brake is cold hammer-forged, resulting in ultra-precise rifling that provides exceptional accuracy and longevity.Intuitive three-position tang safety locks the bolt, preventing inadvertent bolt opening while allowing the rifle to be loaded with the safety engaged.Ruger Marksman Adjustable™ trigger offers a crisp release with a pull weight that is user-adjustable between 3 and 5 pounds.Patented Power Bedding™ integral bedding block system positively locates the receiver and free-floats the barrel for outstanding accuracy.The one-piece bolt is CNC machined from stainless steel for smooth operation and the familiar three-lug design with 70° throw provides ample scope clearance.Oversized bolt handle for positive bolt manipulation, with a 5/16"-24 thread pattern for easy replacement.Factory-installed, one-piece Picatinny scope base.Available accessory stock weight kit adds up to 1.6 pounds to the butt of the rifle to absorb recoil and improve the rifle's balance when utilizing heavier muzzle devices.Also includes: one magazine; steel sling swivel studs. 

Stock Gray Splatter Gen II AmericanBarrel Style Spiral FlutedBarrel Length 20"Barrel Finish Gun Metal Gray CerakoteThread Pattern 5/8"-24Capacity 3Magazine Type Single-StackSights None-Picatinny Scope BaseMaterial Alloy SteelWeight 6.4 lb.Twist 1:10" RHOverall Length 41.75"Length of Pull 12" - 13.75"Grooves 5UPC 7-36676-46915-4Splatter finished stock provides excellent grip without being too sharp or abrasive.Soft rubber recoil pad features a large radius on the heel for easy shouldering and improved geometry that progressively collapses to reduce felt recoil.Removing the installed spacer allows for length of pull to be adjusted from 13.75" to 12". Additional spacers of varying sizes for a more refined fit are available at ShopRuger.com.Installed low comb improves sight alignment when using magnified optics but can be removed when utilizing low-mounted sights. More comb options are available at ShopRuger.com to further refine the fit.Professionally applied Cerakote coating on barrel, muzzle brake, receiver and bolt handle results in a durable, easy-to-maintain finish.Medium contour barrel features deep spiral flutes that reduce weight at the muzzle end of the barrel to improve balance without sacrificing stiffness or accuracy.Threaded barrel with factory-installed radial port muzzle brake is cold hammer-forged, resulting in ultra-precise rifling that provides exceptional accuracy and longevity.Intuitive three-position tang safety locks the bolt, preventing inadvertent bolt opening while allowing the rifle to be loaded with the safety engaged.Ruger Marksman Adjustable™ trigger offers a crisp release with a pull weight that is user-adjustable between 3 and 5 pounds.Patented Power Bedding™ integral bedding block system positively locates the receiver and free-floats the barrel for outstanding accuracy.The one-piece bolt is CNC machined from stainless steel for smooth operation and the familiar three-lug design with 70° throw provides ample scope clearance.Oversized bolt handle for positive bolt manipulation, with a 5/16"-24 thread pattern for easy replacement.Factory-installed, one-piece Picatinny scope base.Available accessory stock weight kit adds up to 1.6 pounds to the butt of the rifle to absorb recoil and improve the rifle's balance when utilizing heavier muzzle devices. Also includes: one magazine; steel sling swivel studs. 

Stock Gray Splatter Gen II AmericanBarrel Fluting SpiralBarrel Length 20"Barrel Finish Gun Metal Gray CerakoteThread Pattern 5/8"-24Capacity 3Magazine Type AI-StyleSights None-Picatinny Scope BaseMaterial Alloy SteelWeight 6.5 lb.Twist 1:8" RHOverall Length 41.25"Length of Pull 12" - 13.75"Grooves 5UPC 7-36676-46901-7Splatter finished stock provides excellent grip without being too sharp or abrasive.Soft rubber recoil pad features a large radius on the heel for easy shouldering and improved geometry that progressively collapses to reduce felt recoil.Removing the installed spacer allows for length of pull to be adjusted from 13.75" to 12". Additional spacers of varying sizes for a more refined fit are available at ShopRuger.com.Installed low comb improves sight alignment when using magnified optics but can be removed when utilizing low-mounted sights. More comb options are available at ShopRuger.com to further refine the fit.Professionally applied Cerakote coating on barrel, muzzle brake, receiver and bolt handle results in a durable, easy-to-maintain finish.Medium contour barrel features deep spiral flutes that reduce weight at the muzzle end of the barrel to improve balance without sacrificing stiffness or accuracy.Threaded barrel with factory-installed radial port muzzle brake is cold hammer-forged, resulting in ultra-precise rifling that provides exceptional accuracy and longevity.Intuitive three-position tang safety locks the bolt, preventing inadvertent bolt opening while allowing the rifle to be loaded with the safety engaged.Ruger Marksman Adjustable™ trigger offers a crisp release with a pull weight that is user-adjustable between 3 and 5 pounds.Patented Power Bedding™ integral bedding block system positively locates the receiver and free-floats the barrel for outstanding accuracy.The one-piece bolt is CNC machined from stainless steel for smooth operation and the familiar three-lug design with 70° throw provides ample scope clearance.Oversized bolt handle for positive bolt manipulation, with a 5/16"-24 thread pattern for easy replacement.Factory-installed, one-piece Picatinny scope base.Available accessory stock weight kit adds up to 1.6 pounds to the butt of the rifle to absorb recoil and improve the rifle's balance when utilizing heavier muzzle devices. Also includes: one magazine; steel sling swivel studs.

Stock Gray Splatter Gen II AmericanBarrel Fluting SpiralBarrel Length 20"Barrel Finish Gun Metal Gray CerakoteThread Pattern 5/8"-24Capacity 3Magazine Type AI-StyleSights None-Picatinny Scope BaseMaterial Alloy SteelWeight 6.5 lb.Twist 1:7.7" RHOverall Length 41.25"Length of Pull 12" - 13.75"Grooves 5UPC 7-36676-46912-3Splatter finished stock provides excellent grip without being too sharp or abrasive.Soft rubber recoil pad features a large radius on the heel for easy shouldering and improved geometry that progressively collapses to reduce felt recoil.Removing the installed spacer allows for length of pull to be adjusted from 13.75" to 12". Additional spacers of varying sizes for a more refined fit are available at ShopRuger.com.Installed low comb improves sight alignment when using magnified optics but can be removed when utilizing low-mounted sights. More comb options are available at ShopRuger.com to further refine the fit.Professionally applied Cerakote coating on barrel, muzzle brake, receiver and bolt handle results in a durable, easy-to-maintain finish.Medium contour barrel features deep spiral flutes that reduce weight at the muzzle end of the barrel to improve balance without sacrificing stiffness or accuracy.Threaded barrel with factory-installed radial port muzzle brake is cold hammer-forged, resulting in ultra-precise rifling that provides exceptional accuracy and longevity.Intuitive three-position tang safety locks the bolt, preventing inadvertent bolt opening while allowing the rifle to be loaded with the safety engaged.Ruger Marksman Adjustable™ trigger offers a crisp release with a pull weight that is user-adjustable between 3 and 5 pounds.Patented Power Bedding™ integral bedding block system positively locates the receiver and free-floats the barrel for outstanding accuracy.The one-piece bolt is CNC machined from stainless steel for smooth operation and the familiar three-lug design with 70° throw provides ample scope clearance.Oversized bolt handle for positive bolt manipulation, with a 5/16"-24 thread pattern for easy replacement.Factory-installed, one-piece Picatinny scope base.Available accessory stock weight kit adds up to 1.6 pounds to the butt of the rifle to absorb recoil and improve the rifle's balance when utilizing heavier muzzle devices. Also includes: one magazine; steel sling swivel studs.

Stock Gray Splatter Gen II AmericanBarrel Fluting SpiralBarrel Length 20"Barrel Finish Gun Metal Gray CerakoteThread Pattern 5/8"-24Capacity 3Magazine Type Single-StackSights None-Picatinny Scope BaseMaterial Alloy SteelWeight 6.5 lb.Twist 1:8" RHOverall Length 41.75"Length of Pull 12" - 13.75"Grooves 5Splatter finished stock provides excellent grip without being too sharp or abrasive.Soft rubber recoil pad features a large radius on the heel for easy shouldering and improved geometry that progressively collapses to reduce felt recoil.Removing the installed spacer allows for length of pull to be adjusted from 13.75" to 12". Additional spacers of varying sizes for a more refined fit are available at ShopRuger.com.Installed low comb improves sight alignment when using magnified optics but can be removed when utilizing low-mounted sights. More comb options are available at ShopRuger.com to further refine the fit.Professionally applied Cerakote coating on barrel, muzzle brake, receiver and bolt handle results in a durable, easy-to-maintain finish.Medium contour barrel features deep spiral flutes that reduce weight at the muzzle end of the barrel to improve balance without sacrificing stiffness or accuracy.Threaded barrel with factory-installed radial port muzzle brake is cold hammer-forged, resulting in ultra-precise rifling that provides exceptional accuracy and longevity.Intuitive three-position tang safety locks the bolt, preventing inadvertent bolt opening while allowing the rifle to be loaded with the safety engaged.Ruger Marksman Adjustable™ trigger offers a crisp release with a pull weight that is user-adjustable between 3 and 5 pounds.Patented Power Bedding™ integral bedding block system positively locates the receiver and free-floats the barrel for outstanding accuracy.The one-piece bolt is CNC machined from stainless steel for smooth operation and the familiar three-lug design with 70° throw provides ample scope clearance.Oversized bolt handle for positive bolt manipulation, with a 5/16"-24 thread pattern for easy replacement.Factory-installed, one-piece Picatinny scope base.Available accessory stock weight kit adds up to 1.6 pounds to the butt of the rifle to absorb recoil and improve the rifle's balance when utilizing heavier muzzle devices. Also includes: one magazine; steel sling swivel studs. 

Stock Black Splatter Gen II AmericanBarrel Length 16.10"Barrel Finish Graphite Black CerakoteThread Pattern 1/2"-28Weight 6.5 lb.Capacity 10Magazine Type AR-StyleSights None-Picatinny Scope BaseMaterial Alloy SteelTwist 1:8" RHOverall Length 37.35"Length of Pull 12" - 13.75"Grooves 5Splatter finished stock provides excellent grip without being too sharp or abrasive.Soft rubber recoil pad features a large radius on the heel for easy shouldering and improved geometry that progressively collapses to reduce felt recoil.Removing the installed spacer allows for length of pull to be adjusted from 13.75" to 12". Additional spacers of varying sizes for a more refined fit are available at ShopRuger.com.Installed low comb improves sight alignment when using magnified optics but can be removed when utilizing low-mounted sights. More comb options are available at ShopRuger.com to further refine the fit.Professionally applied Cerakote coating on barrel, thread protector, receiver and bolt handle results in a durable, easy-to-maintain finish.Bull contour barrel increases weight for better stability and reduced felt recoil.Threaded barrel with factory-installed thread protector is cold hammer-forged, resulting in ultra-precise rifling that provides exceptional accuracy and longevity.Intuitive three-position tang safety locks the bolt, preventing inadvertent bolt opening while allowing the rifle to be loaded with the safety engaged.Ruger Marksman Adjustable™ trigger offers a crisp release with a pull weight that is user-adjustable between 3 and 5 pounds.Patented Power Bedding™ integral bedding block system positively locates the receiver and free-floats the barrel for outstanding accuracy.The one-piece bolt is CNC machined from stainless steel for smooth operation and the familiar three-lug design with 70° throw provides ample scope clearance.Oversized bolt handle for positive bolt manipulation, with a 5/16"-24 thread pattern for easy replacement.Factory-installed, one-piece Picatinny scope base.Available accessory stock weight kit adds up to 1.6 pounds to the butt of the rifle to absorb recoil and improve the rifle's balance when utilizing heavier muzzle devices.Also includes: one magazine; steel sling swivel studs.

Stock Black Splatter Gen II AmericanBarrel Length 20"Barrel Finish Smoked Bronze CerakoteThread Pattern 1/2"-28Weight 6.8 lb.Capacity 10Magazine Type AR-StyleSights None-Picatinny Scope BaseMaterial Alloy SteelTwist 1:7" RHOverall Length 41.25"Length of Pull 12" - 13.75"Grooves 5Splatter finished stock provides excellent grip without being too sharp or abrasive.Soft rubber recoil pad features a large radius on the heel for easy shouldering and improved geometry that progressively collapses to reduce felt recoil.Removing the installed spacer allows for length of pull to be adjusted from 13.75" to 12". Installed low comb improves sight alignment when using magnified optics but can be removed when utilizing low-mounted sights. Professionally applied Cerakote coating on barrel, thread protector, receiver and bolt handle results in a durable, easy-to-maintain finish.Bull contour barrel increases weight for better stability and reduced felt recoil.Shallow spiral flutes increases surface area for additional cooling.Threaded barrel with factory-installed thread protector is cold hammer-forged, resulting in ultra-precise rifling that provides exceptional accuracy and longevity.Intuitive three-position tang safety locks the bolt, preventing inadvertent bolt opening while allowing the rifle to be loaded with the safety engaged.Ruger Marksman Adjustable™ trigger offers a crisp release with a pull weight that is user-adjustable between 3 and 5 pounds.Patented Power Bedding™ integral bedding block system positively locates the receiver and free-floats the barrel for outstanding accuracy.The one-piece bolt is CNC machined from stainless steel for smooth operation and the familiar three-lug design with 70° throw provides ample scope clearance.Oversized bolt handle for positive bolt manipulation, with a 5/16"-24 thread pattern for easy replacement.Factory-installed, one-piece Picatinny scope base.Available accessory stock weight kit adds up to 1.6 pounds to the butt of the rifle to absorb recoil and improve the rifle's balance when utilizing heavier muzzle devices. Also includes: one magazine; steel sling swivel studs.

Stock Green Splatter Gen II AmericanBarrel Fluting SpiralBarrel Length 22"Barrel Finish Burnt Bronze CerakoteThread Pattern 5/8"-24Capacity 3Magazine Type AI-StyleSights None-Picatinny Scope BaseMaterial Alloy SteelWeight 6.5 lb.Twist 1:10" RHOverall Length 43.25"Length of Pull 12" - 13.75"Grooves 5UPC 7-36676-46931-4Splatter finished stock provides excellent grip without being too sharp or abrasive.Soft rubber recoil pad features a large radius on the heel for easy shouldering and improved geometry that progressively collapses to reduce felt recoil.Removing the installed spacer allows for length of pull to be adjusted from 13.75" to 12". Additional spacers of varying sizes for a more refined fit are available at ShopRuger.com.Installed low comb improves sight alignment when using magnified optics but can be removed when utilizing low-mounted sights. More comb options are available at ShopRuger.com to further refine the fit.Professionally applied Cerakote coating on barrel, muzzle brake, receiver and bolt handle results in a durable, easy-to-maintain finish.Medium contour barrel features deep spiral flutes that reduce weight at the muzzle end of the barrel to improve balance without sacrificing stiffness or accuracy.Threaded barrel with factory-installed radial port muzzle brake is cold hammer-forged, resulting in ultra-precise rifling that provides exceptional accuracy and longevity.Intuitive three-position tang safety locks the bolt, preventing inadvertent bolt opening while allowing the rifle to be loaded with the safety engaged.Ruger Marksman Adjustable™ trigger offers a crisp release with a pull weight that is user-adjustable between 3 and 5 pounds.Patented Power Bedding™ integral bedding block system positively locates the receiver and free-floats the barrel for outstanding accuracy.The one-piece bolt is CNC machined from stainless steel for smooth operation and the familiar three-lug design with 70° throw provides ample scope clearance.Oversized bolt handle for positive bolt manipulation, with a 5/16"-24 thread pattern for easy replacement.Factory-installed, one-piece Picatinny scope base.Available accessory stock weight kit adds up to 1.6 pounds to the butt of the rifle to absorb recoil and improve the rifle's balance when utilizing heavier muzzle devices. Also includes: one magazine; steel sling swivel studs.

Stock Magpul DT CarbineHandguard Full Picatinny with M-LOK Attachment SlotsTrigger Mil-SpecFinish Type III Hard Anodized/NitridedGrip Magpul MOE-K2Sights NoneBarrel Length 16.10"Barrel Contour GovernmentThread Pattern 1/2"-28Capacity 30Height 7.50"Weight 6.8 lb.Overall Length 35.87"Length of Pull 10.75" - 14"Twist 1:8" RHGrooves 6Lower receiver is fitted with Magpul MOE-K2 grip and DT Carbine collapsible buttstock on a Mil-Spec buffer tube.Free float hand guard with slim profile provides enhanced ergonomics. Features full-length Picatinny rail on top and QD sling sockets on both sides.Magpul M-LOK accessory attachment slots along the 3:00, 6:00 and 9:00 positions with 8 intermediate slots on muzzle end.Threaded barrel features a 1/2"-28 threaded muzzle and is fitted with an A2 flash hider which can be removed to allow for use of other muzzle accessories.Upper and Lower receivers machined to mil-spec dimensions from 7075 forgings and Type III hardcoat anodized. Lower receiver includes a tension screw to eliminate play between upper and lower receiver.Upper receiver includes a forward assist, dust cover and brass deflector.16.1" Government profile barrel features 6-groove 1:8" twist rifling, mid-length gas system and a nitride finish.Compatible with mil-spec components, rifle ships with single-stage GI trigger, selector, charging handle, carbine buffer and spring for confident reliability.Nitrided bolt and bolt carrier group features staked gas key.Includes one 30-round Magpul PMAG magazine.

Stock American Black WalnutFront Sight NoneRear Sight NoneCapacity 4Thread Pattern 5/8"-24Barrel Length 20"Material Stainless SteelFinish Satin StainlessWeight 7 lbs.Twist 1:10" RHOverall Length 40"Length of Pull 13.50"Grooves 5Limited edition model features a special "Made in the 250th Year of American Liberty" engraving on the floorplate to commemorate America's 250th Anniversary.Non-rotating, Mauser-type controlled round feed extractor is among the most positive case extraction systems ever invented, and features a fixed blade-type ejector that positively ejects empty cases as the bolt is moved fully rearward.Hinged, solid-steel floorplate for easy unloading without having to chamber each cartridge. Features an engraved Ruger logo and patented latch that is flush with the trigger guard to avoid accidental dumping of cartridges.Three-position safety is easily accessible and allows the shooter to lock the bolt or to load and unload the rifle with the safety engaged.Ergonomically pleasing stock has rounded contours along the barrel, on the bottom of the stock and on top of the pistol grip and wrap-around checkering on grip and forend.Free-floated, threaded barrel with factory-installed thread protector is cold hammer-forged, resulting in ultra-precise rifling that provides exceptional accuracy and longevity.Integral scope mounts, machined directly on the solid-steel receiver, provide a stable mounting surface for included scope rings, eliminating a potential source of looseness and inaccuracy in the field.The LC6™ trigger features smooth, crisp performance right out of the box for increased accuracy on the range or in the field.Rugged, one-piece, stainless steel bolt.Also includes: studs for mounting sling swivels.

Stock Quick-Fit Precision Rimfire AdjustableCapacity 15Barrel Length 18"Overall Length 38.63"Grip AR-PatternHandguard Free-Float With Magpul® M-LOK® SlotsHandguard Finish Black, Hard-Coat AnodizedBarrel Style TargetThread Pattern 1/2"-28Length of Pull 12" - 15.50"Sights None-Rail InstalledWeight 6.8 lb.Twist 1:16" RHGrooves 6Molded, one-piece chassis and adjustable buttstock assembly are manufactured with glass-filled nylon for strength, stiffness and stability, making a solid foundation for accuracy each and every shot. Adjustable buttstock features a flat Picatinny bag rider making it easy to affix a rear monopod. A molded-in window provides a tether point for your squeeze bag, and a metal QD pocket makes it easy to secure a sling.Quick-Fit adjustable Precision Rimfire stock allows length of pull and comb height to be quickly and easily adjusted to get proper fit over a wide range of shooter sizes, outerwear and shooting positions. Indicating marks molded into the chassis help you quickly return to a previous position.Big-Gun bolt throw adjustment enables shooters to change from a rimfire 1-1/2" bolt throw to a short-action centerfire 3" bolt throw, reducing the chance of short-stroking your bolt in competition.Ruger Marksman Adjustable™ trigger is externally adjustable, with a trigger pull range of 2.25 to 5 pounds; wrench is stored in a buttstock compartment.Ruger's own AR-Pattern pistol grip and safety selector provides an extended reach for maximum control and access to the 45°, reversible safety selector. May be configured with most AR-style grips and selectors.Anodized Picatinny scope base includes 30 MOA elevation for increased long-range capabilities out of the box.Oversized bolt handle for positive bolt manipulation (same as the Ruger Precision® Rifle).15" aluminum free-float handguard is black hard-coat anodized aluminum and features Magpul® M-LOK® slots on all four sides for improved scope clearance for long-range scopes and easy mounting of M-LOK-compatible rails and accessories.Target barrel is cold hammer-forged from 1137 alloy steel to create ultra precise rifling for excellent accuracy. Barrel can be replaced easily by a competent gunsmith using AR-style wrenches and headspace gauges.1/2"-28 threaded barrel for standard muzzle accessories - comes with a factory-installed thread protector covering both the threads and crown.Accepts all 10/22® magazines.Also includes: one, 15-round BX-15® magazine.