The only correctly made mag extensions on the market.  Other magazine extensions on the market are simply rectangular blocks.  If you look at your magazine the bottom is angled so when you attach a competitors extension, it is not parallel with the column of cartridges in the magazine.  This probably works fine for +2 rounds, but it would not work for much if any more.  We decided to do it right, and cut the attachment rail at an angle to the pocket in the mag.  This means that the column of rounds travels straight down into the extension.  This took extra time on the mill and we chose to cut them in one operation on the 4th axis, but it was worth it to deliver to you the most advanced product of its kind.  The fluting around the sides make an excellent gripping point for mag changes and also helps to remove some weight.After starting with the American Rifle Company +4 mag extension, we realized that with a little bit of redesign that it could work equally well with AICS an Accurate mags.  The 419 universal mag extensions are designed to work on a variety of magazines from the ARC 10rd mag to AICS 5 or 10rd and Accurate Mag in either standard bolt face or on SAUM/WSM mags (these do not work on 223). They are NOT COMPATIBLE with AI AW magazines, as those have a fixed/welded floorplate.Easy install, great performance, and the quality you’ve come to expect from Area 419.Expected Capacity Increase:ARC 10-Rounders: +4 or +5 depending on cartridgeAICS & Accurate 10 Rd: +3 or +4 depending on cartridgeAICS & Accurate 5 Rd: +2 or +3 depending on cartridgeAccurate WSM 3 or 7 Rd: +3NOTE:  **THESE DO NOT WORK WITH MAGPUL OR ANY OTHER POLYMER AI MAGS**Weight .4 lbsDimensions 6 × 3.5 × 2 inColor BlackManufacturer Area 419

In our opinion these are the only correctly made mag extensions on the market.  Other magazine extensions on the market are simply rectangular blocks.  If you look at your magazine the bottom is angled so when you attach a competitors extension, it is not parallel with the column of cartridges in the magazine.  This probably works fine for +2 rounds, but it would not work for much if any more.  We decided to do it right, and cut the attachment rail at an angle to the pocket in the mag.  This means that the column of rounds travels straight down into the extension.  This took extra time on the mill and we chose to cut them in one operation on the 4th axis, but it was worth it to deliver to you the most advanced product of its kind.  The fluting around the sides make an excellent gripping point for mag changes and also helps to remove some weight.After starting with the American Rifle Company +4 mag extension, we realized that with a little bit of redesign that it could work equally well with AICS an Accurate mags.  The 419 universal mag extensions are designed to work on a variety of magazines from the ARC 10rd mag to AICS 5 or 10rd and Accurate Mag in either standard bolt face or on SAUM/WSM mags (these do not work on 223). They are NOT COMPATIBLE with AI AW magazines, as those have a fixed/welded floorplate.Easy install, great performance, and the quality you’ve come to expect from Area 419.Expected Capacity Increase:ARC 10-Rounders: +4 or +5 depending on cartridgeAICS & Accurate 10 Rd: +3 or +4 depending on cartridgeAICS & Accurate 5 Rd: +2 or +3 depending on cartridgeAccurate WSM 3 or 7 Rd: +3NOTE:  **THESE DO NOT WORK WITH MAGPUL OR ANY OTHER POLYMER AI MAGS**Weight .4 lbsDimensions 6 × 3.5 × 2 inColor BlueManufacturer Area 419

The only correctly made mag extensions on the market.  Other magazine extensions on the market are simply rectangular blocks.  If you look at your magazine the bottom is angled so when you attach a competitors extension, it is not parallel with the column of cartridges in the magazine.  This probably works fine for +2 rounds, but it would not work for much if any more.  We decided to do it right, and cut the attachment rail at an angle to the pocket in the mag.  This means that the column of rounds travels straight down into the extension.  This took extra time on the mill and we chose to cut them in one operation on the 4th axis, but it was worth it to deliver to you the most advanced product of its kind.  The fluting around the sides make an excellent gripping point for mag changes and also helps to remove some weight.After starting with the American Rifle Company +4 mag extension, we realized that with a little bit of redesign that it could work equally well with AICS an Accurate mags.  The 419 universal mag extensions are designed to work on a variety of magazines from the ARC 10rd mag to AICS 5 or 10rd and Accurate Mag in either standard bolt face or on SAUM/WSM mags (these do not work on 223). They are NOT COMPATIBLE with AI AW magazines, as those have a fixed/welded floorplate.Easy install, great performance, and the quality you’ve come to expect from Area 419.Expected Capacity Increase:ARC 10-Rounders: +4 or +5 depending on cartridgeAICS & Accurate 10 Rd: +3 or +4 depending on cartridgeAICS & Accurate 5 Rd: +2 or +3 depending on cartridgeAccurate WSM 3 or 7 Rd: +3NOTE:  **THESE DO NOT WORK WITH MAGPUL OR ANY OTHER POLYMER AI MAGS**Weight .4 lbsDimensions 6 × 3.5 × 2 inColor RedManufacturer Area 419

** THIS RAIL REQUIRES 6 CONSECUTIVE MLOK SLOTS TO ATTACH. FOR STOCKS WITH FEWER MLOK SLOTS, YOU’LL WANT A 12? UNIVERSAL RAIL WITH MLOK ATTACHMENT NUTS **Area 419 is always looking for ways to improve existing products when we are not developing new technologies. With the rapid growth in popularity of ARCA rails in precision rifle, we saw a need to improve this great dovetail technology to something that could be mechanically locked in place instead of just friction.  If you have ever tried using a Barricade stop on an existing ARCA rail, you’ve probably also seen it slide under much pressure.Introducing the ARCALOCK Dovetail Rail System *Rail is only locking with an Area 419 clamp*Rail Features:– Serrated rail sides interface with our proprietary clamp design to mechanically lock it in place so no movement is possible.  Serrations are not sharp, will not damage bags or your hands.– Rail is backwards compatible with standard Arca accessories, but will not be locking without our clamp– Rail is 12? long giving you the entire length of the stock forend for attachments.  The best part is, it still only weighs in at a paltry 4.1oz– Made to the RRS 1.5? Dovetail Standard, so you can be sure lever clamps will work– No sharp edges. Every corner is radiused, and every edge is chamfered on the machine. This takes longer to make, but it is the only right way.– Type 3 Hard Coat anodized for additional durability.– Made from 6061-T6 Aluminum– Made in-house here in the USA from USA sourced Aluminum on USA made CNCs– M-LOK Slots on underside of rail also allow you to attach any M-LOK accessories to the 419 Rail– Rail comes with all M-LOK mounting hardwareWeight .8 lbsDimensions 16 × 2.5 × 2.5 inManufacturer Area 419Color Flat Dark Earth

** THIS RAIL REQUIRES 3 CONSECUTIVE MLOK SLOTS TO ATTACH. **Area 419 is always looking for ways to improve existing products when we are not developing new technologies. With the rapid growth in popularity of ARCA rails in precision rifle, we saw a need to improve this great dovetail technology to something that could be mechanically locked in place instead of just friction.  If you have ever tried using a Barricade stop on an existing ARCA rail, you’ve probably also seen it slide under much pressure.Introducing the ARCALOCK Dovetail Rail System *Rail is only locking with an Area 419 clamp*Rail Features:– Serrated rail sides interface with our proprietary clamp design to mechanically lock it in place so no movement is possible.  Serrations are not sharp, will not damage bags or your hands.– Rail is backwards compatible with standard Arca accessories, but will not be locking without our clamp– Rail is 6? long and weighs in at a paltry 2.2oz– Made to the RRS 1.5? Dovetail Standard, so you can be sure lever clamps will work– No sharp edges. Every corner is radiused, and every edge is chamfered on the machine. This takes longer to make, but it is the only right way.– Type 3 Hard Coat anodized for additional durability.– Made from 6061-T6 Aluminum– Made in-house here in the USA from USA sourced Aluminum on USA made CNCs– Rail comes with all M-LOK mounting hardwareWeight .4 lbsDimensions 10 × 1 × 4 inManufacturer Area 419Finish Black Anodized, FDE Anodized

** THIS RAIL REQUIRES 3 CONSECUTIVE MLOK SLOTS TO ATTACH. **Area 419 is always looking for ways to improve existing products when we are not developing new technologies. With the rapid growth in popularity of ARCA rails in precision rifle, we saw a need to improve this great dovetail technology to something that could be mechanically locked in place instead of just friction.  If you have ever tried using a Barricade stop on an existing ARCA rail, you’ve probably also seen it slide under much pressure.Introducing the ARCALOCK Dovetail Rail System *Rail is only locking with an Area 419 clamp*Rail Features:– Serrated rail sides interface with our proprietary clamp design to mechanically lock it in place so no movement is possible.  Serrations are not sharp, will not damage bags or your hands.– Rail is backwards compatible with standard Arca accessories, but will not be locking without our clamp– Rail is 6? long and weighs in at a paltry 2.2oz– Made to the RRS 1.5? Dovetail Standard, so you can be sure lever clamps will work– No sharp edges. Every corner is radiused, and every edge is chamfered on the machine. This takes longer to make, but it is the only right way.– Type 3 Hard Coat anodized for additional durability.– Made from 6061-T6 Aluminum– Made in-house here in the USA from USA sourced Aluminum on USA made CNCs– Rail comes with all M-LOK mounting hardwareWeight .4 lbsDimensions 10 × 1 × 4 inManufacturer Area 419Finish FDE Anodized 

** THIS RAIL REQUIRES 6 CONSECUTIVE MLOK SLOTS TO ATTACH. FOR STOCKS WITH FEWER MLOK SLOTS, YOU’LL WANT A 12? UNIVERSAL RAIL WITH MLOK ATTACHMENT NUTS **Area 419 is always looking for ways to improve existing products when we are not developing new technologies. With the rapid growth in popularity of ARCA rails in precision rifle, we saw a need to improve this great dovetail technology to something that could be mechanically locked in place instead of just friction.  If you have ever tried using a Barricade stop on an existing ARCA rail, you’ve probably also seen it slide under much pressure.Introducing the ARCALOCK Dovetail Rail System *Rail is only locking with an Area 419 clamp*Rail Features:– Serrated rail sides interface with our proprietary clamp design to mechanically lock it in place so no movement is possible.  Serrations are not sharp, will not damage bags or your hands.– Rail is backwards compatible with standard Arca accessories, but will not be locking without our clamp– Rail is 12? long giving you the entire length of the stock forend for attachments.  The best part is, it still only weighs in at a paltry 4.1oz– Made to the RRS 1.5? Dovetail Standard, so you can be sure lever clamps will work– No sharp edges. Every corner is radiused, and every edge is chamfered on the machine. This takes longer to make, but it is the only right way.– Type 3 Hard Coat anodized for additional durability.– Made from 6061-T6 Aluminum– Made in-house here in the USA from USA sourced Aluminum on USA made CNCs– M-LOK Slots on underside of rail also allow you to attach any M-LOK accessories to the 419 Rail– Rail comes with all M-LOK mounting hardwareWeight .8 lbsDimensions 16 × 2.5 × 2.5 inManufacturer Area 419Color Black

Mounting adapter for the popular Send iT electronic level. Allows you to mount vertically (up or down) in any of the multiple mounting locations on our rings and mounts.Please be sure your Send iT level is new enough that is has the removable thumb screw mount, if it is not removable this will not work, and you will just want a standard Pic Rail.Machined from 6061 Aluminum, this product is Made in America and built to last.Weight .5 lbsDimensions 6 × 4 × 1 inIncludes Adapter ONLY

A scope level doesn’t need to be complicated, it needs to be visible, and needs to be repeatable. This accomplishes these things with a high visibility spirit vial, and a simple but versatile design that allows you to mount it to any of several mounting points on our rings and mounts, all based on your preference.Machined from 6061 Aluminum, this product is Made in America and built to last.Not compatible with the HUNT Scope RingsWeight .5 lbsDimensions 6 × 4 × 1 in

When we set out to make the perfect scope mount, we knew what we needed to make something that was reliable and consistent at a degree you won’t find anywhere else on the market. This led us down a rabbit-hole, ultimately arriving on a process that gets you final-bore matched rings, with raw aluminum internals, for a grip on your optic that is more reliable and more true than anything else made – as well as an incredible amount of robustness without adding unnecessary weight.Like most mounts, these begin as separate parts. We are making the bases and caps in batches. While many will make these parts, send them to anodize, and then just assemble, we produce around the extra steps. Once these parts return from anodize, they are fully assembled, placed back into specially produced rail fixtures, with the caps torqued to spec over specially made spacers (to give the rings space to torque down on the optic), and final-bored as sets in our world-class machining centers. Mounts are then brought off the machine in sets, QC’d and packaged, ensuring that you receive a mount that was finished perfectly.Is it overkill? Probably. But we think it’s the right way. So that’s what we are going to do.KEY FEATURESCNC Milled in America from American 7075 AluminumRaw aluminum, precision bored scope contact surfaces for maximum gripFinal-bored in sets, and never fully disassembled after boringMultiple accessory mounting pointsSeparate rail clamping bars for maximum grab on the pic railInset clamping feet, allowing for maximum mounting adjustment and pic rail utilitySteel guide pins between base and caps, aiding in alignmentCustom nitrided stainless hardwareWeight 1.5 lbsDimensions 9.5 × 5.8 × 2.8 inTube Diameter 30mmHeight 39mm (1.54")Cant 0 MOA

When we set out to make the perfect scope mount, we knew what we needed to make something that was reliable and consistent at a degree you won’t find anywhere else on the market. This led us down a rabbit-hole, ultimately arriving on a process that gets you final-bore matched rings, with raw aluminum internals, for a grip on your optic that is more reliable and more true than anything else made – as well as an incredible amount of robustness without adding unnecessary weight.Like most mounts, these begin as separate parts. We are making the bases and caps in batches. While many will make these parts, send them to anodize, and then just assemble, we produce around the extra steps. Once these parts return from anodize, they are fully assembled, placed back into specially produced rail fixtures, with the caps torqued to spec over specially made spacers (to give the rings space to torque down on the optic), and final-bored as sets in our world-class machining centers. Mounts are then brought off the machine in sets, QC’d and packaged, ensuring that you receive a mount that was finished perfectly.Is it overkill? Probably. But we think it’s the right way. So that’s what we are going to do.KEY FEATURESCNC Milled in America from American 7075 AluminumRaw aluminum, precision bored scope contact surfaces for maximum gripFinal-bored in sets, and never fully disassembled after boringMultiple accessory mounting pointsSeparate rail clamping bars for maximum grab on the pic railInset clamping feet, allowing for maximum mounting adjustment and pic rail utilitySteel guide pins between base and caps, aiding in alignmentCustom nitrided stainless hardwareWeight 1.5 lbsDimensions 9.5 × 5.8 × 2.8 inTube Diameter 34mmHeight 39mm (1.54")Cant 0 MOA

When we set out to make the perfect scope mount, we knew what we needed to make something that was reliable and consistent at a degree you won’t find anywhere else on the market. This led us down a rabbit-hole, ultimately arriving on a process that gets you final-bore matched rings, with raw aluminum internals, for a grip on your optic that is more reliable and more true than anything else made – as well as an incredible amount of robustness without adding unnecessary weight.Like most mounts, these begin as separate parts. We are making the bases and caps in batches. While many will make these parts, send them to anodize, and then just assemble, we produce around the extra steps. Once these parts return from anodize, they are fully assembled, placed back into specially produced rail fixtures, with the caps torqued to spec over specially made spacers (to give the rings space to torque down on the optic), and final-bored as sets in our world-class machining centers. Mounts are then brought off the machine in sets, QC’d and packaged, ensuring that you receive a mount that was finished perfectly.Is it overkill? Probably. But we think it’s the right way. So that’s what we are going to do.KEY FEATURESCNC Milled in America from American 7075 AluminumRaw aluminum, precision bored scope contact surfaces for maximum gripFinal-bored in sets, and never fully disassembled after boring8-9oz per mount, depending on model, balancing weight management and robustnessMultiple accessory mounting pointsSeparate rail clamping bars for maximum grab on the pic railInset clamping feet, allowing for maximum mounting adjustment and pic rail utilitySteel guide pins between base and caps, aiding in alignmentCustom nitrided stainless hardwareWeight 1.5 lbsDimensions 9.5 × 5.8 × 2.8 inTube Diameter 34mmHeight 39mm (1.54")Cant 0 MOA