The Hydrogen series are extremely light weight, extremely quiet suppressor made with the PRS shooters and hunters in mind. The unique look comes from external weight reduction, removing all unnecessary material to keep the weight down but still as strong as possible – this results in a suppressor that has 10% more surface area and a lower weight that sheds heat faster and cools down quicker.On a 20 pound match rifle, an ultra light hunting rig, short barrel 300 blk or your 5.56 running drills the Hydrogen series is right at home with a full auto rating so long as the suppressor is kept under 800 degrees.All Hydrogen series suppressors feature industry standard universal 1.375×24 rear threads so you can pick what mounting system best fits your needs.Hydrogen-S: Length: 7” (no mount)Weight: 9.3 oz (no mount)OD: 1.625”137 dB on 16” 308 with BK 2209

Constructed out of 6Al-4V Grade 5 Titanium and CNC welded the lithium was designed from the ground up to offer the best weight to suppression ratio of any 9mm SMG/PCC suppressor on the market.It uses internal features and venting to help reduce port pop on direct blowback operating systems and features industry standard 1.375×24 (also known as HUB/ASR Bravo) rear mounting threads to easily be adapted to the mounting system of your choice. The lithium 9 is compatible with 3 lug and booster/piston mounts and can be used on 9mm handguns.SpecsLength: 6” (no mount)Weight: 5.7 oz (no mount)OD: 1.5”Barrel Length / Firing Schedule9mm: Full auto rated, no barrel length restrictions.300 blackout subsonic: Full auto rated, no barrel length restrictions.300 blackout supersonic: Semi auto, 7 inch barrels and longer.357 magnum lever action rifles: Yes, 4 inch barrel length restriction.350 legend, 300 HAMR: Semi auto, 16 inch barrels and longer223/5.56: Semi auto with intent to keep temperature down/low volume use, barrel must be 16 inches or longer.308 Winchester/6.5 Creedmoor: Bolt action hunting applications only/low volume use, 20 inch barrel or longer.Because the Lithim has a smaller blast chamber than most typical rifle suppressors a direct thread mount must be used if it’s being fired on 350 legend, 300 HAMR, 223/5.56, 308 and 6.5 Creedmoor and other similar cartridges so that you have maximum blast chamber volume not being occupied by a muzzle device.What’s in the box?Suppressor1/2×28 Titanium direct thread mount (ZR0)Tube clampStickers

The Polonium is made to be a quiet, duty rated, hard use 5.56 suppressor and is offered in both standard and K length options. If you’re looking for the best size, weight and price to sound performance ratio on the market that you can beat the absolute crap out of then look no further than the Polonium series. We don’t need to make up fake, fancy marketing language or give you padded/deflated dB numbers taken on subpar equipment – the reputation, performance and track record of the Polonium and Polonium-K speak for themselves.The Polonium uses a 6mm bore that is also compatible with any 6mm/.243 cartridges and has a highly effective built in internal and external flash hider that offers superior flash reduction over the competition when using night vision or when shooting in low light conditions. The unique look comes from external weight reduction, removing all unnecessary material to keep the weight down but still as strong as possible. This results in a suppressor that has 10% more surface area depending on the length that will shed heat and cool down quicker.The Polonium and Polonium-K features industry standard universal 1.375×24 rear threads so you can pick what mounting system best fits your needs.What’s included in the box?SuppressorStickersInstruction pamphlet1/2×28 direct thread adapter with Polonium & Polonium-KTube clamp for installing and changing mounts

The Polonium is made to be a quiet, duty rated, hard use 5.56 suppressor and is offered in both standard and K length options. If you’re looking for the best size, weight and price to sound performance ratio on the market that you can beat the absolute crap out of then look no further than the Polonium series. We don’t need to make up fake, fancy marketing language or give you padded/deflated dB numbers taken on subpar equipment – the reputation, performance and track record of the Polonium and Polonium-K speak for themselves.The Polonium uses a 6mm bore that is also compatible with any 6mm/.243 cartridges and has a highly effective built in internal and external flash hider that offers superior flash reduction over the competition when using night vision or when shooting in low light conditions. The unique look comes from external weight reduction, removing all unnecessary material to keep the weight down but still as strong as possible. This results in a suppressor that has 10% more surface area depending on the length that will shed heat and cool down quicker.The Polonium and Polonium-K features industry standard universal 1.375×24 rear threads so you can pick what mounting system best fits your needs.SPECSThe Polonium series of suppressors are made from H900 heat treated 17-4 stainless steel and constructed as a CNC welded tubeless design.Length: Polonium & Polonium-30 — 5.8, Polonium-K — 4.8”Weight: Polonium & Polonium-30 — 13.5 oz, Polonium-K — 11.5 oz (weights taken with no mount) 

The Universe-36 is well… Universal. You can use it on damn near any caliber in the known universe from 22LR and 5.56 to .338 Lapua and everything in between – as long as it fits down the bore it’s good to go. If you want to use it on a 9mm handgun, it can do that. If you want to use it on a full auto 5.56 SBR, it can do that. If you want to use it on a 30-30 lever gun, it can do that. If you want to use it on a big ass 338 Lapua magnum shooting 2000 yards, guess what? Yep, it can do that too. The only limit is your imagination. This is for the person who just wants one suppressor to do it all.The Universe has Infinity DNA being DMLS printed out of Inconel, this thing is tough as nails. FRT, easy. Full auto, easy. Belt fed, who cares – easy. It uses a cool end cap system that lets you adjust between low back pressure and high back pressure for any caliber or gun you’re using to get it dialed in. Combine that with the fact the Universe-36 also utilizes the universal HUB/1.375×24 thread pattern to let you use any mount, QD system, booster or 3 lug you want – the options and configurations are limitless, vast and ever expanding (like your mom).It comes in the box with a 9mm low back pressure end cap installed. Additional end caps that are available for purchase separately: 9mm high back pressure, 7.62 low back pressure, 7.62 high back pressure, 5.56 low back pressure, 5.56 high back pressure. The end caps can be changed with nothing more than a socket OR adjustable wrench, whichever you have laying around. No proprietary tools are needed for this suppressor to ensure it’s as easy to use as possible.If you’re the guy who wants one suppressor that will work on every gun in your safe (as long as the bullet is .36 or smaller), is extremely adjustable/adaptable, rock solid reliability, easy to use with no proprietary tools then look no further. You’ve found it.